Construction Of Store ( I/C Junior Engineer Residence On Bharmour To Hadsar Road At Gallikatai In Tehsil Bharmour
Tender Value
30.82 Lakhs
Estimated cost
Bid Submission
06 Feb 2023
0 days left
EMD
61651
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bharmour → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Store ( I / C Junior Engineer Residence On Bharmour To Hadsar Road At Gallikatai In Tehsil Bharmour
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m (One deciml five meter)in width or 10 sqm ( ten squraeon plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed Ordinary rock, within a lead of 50 mall leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. |
| 2 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies,heights of propping and centring below supporting floor to ceiling uptoanyheights and removal of the same for insitu-reinforced concrete and plain concrete work in foundation footing, bases of columns in all height/ depth as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 3 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies,heights of propping and centring below supporting floor to ceiling uptoanyheights and removal of the same for insitu-reinforced concrete and plain concrete work in column, pillars, piers, abutments, posts and struts in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 4 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies,heights of propping and centring below supporting floor to ceiling uptoanyheights and removal of the same for insitu-reinforced concrete and plain concrete work in shelves (cast in situ)in all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 5 | Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies,heights of propping and centring below supporting floor to ceiling uptoanyheights and removal of the same for insitu-reinforced concrete and plain concrete work inStairs ( excludng landings ) except spiral staircasesin all heights as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutteringAll work up to plinth level 1:4:8 (One cement in toFour sand in toEight graded/crushed stone aggregate) 40mm (Forty milimetres) nominal size) in road work and as per the instructions of Engineer-in-charge within all leads, lifts of materials and other incidentals. |
| 7 | Providing and laying1:1.5:3 ( One cement is to one decimal five is to three ) 20mm ( Twenty millimeter ) nominal sizein position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcementcost of formwork in foundation and plinth within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 8 | Reinforced cement concrete 1:1.5:3 ( One cement is to one decimal five is to three ) 20mm ( Twenty millimeter ) nominal size work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 9 | Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding, straighting, cutting and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floorswithin all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five)in super structure above plinth level upto floor all level in cement mortar 1:6 (onecement isto six coarse sand) and curing completeas per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 11 | ProvidingCoursed rubble masonry (first sort) with hard stones in foundation and plinth with cement mortar 1:6 (one cement isto sixcoarse sand) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 12 | Stone filling behind under flloor wallsand Breast wall , Retaining wall behind the abutment including perapet ,wing wallas per the direction of Engineer-in-charge.as per direction of Engineer – in – charge |
| 13 | Providing and fixing 12 mm ( Twelve millimeter )thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- laminated conforming to IS : 12823, Grade 1, Type - II markedas per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 14 | Providing and fixing factory made shutters of Pre laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium \"U\" type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws, including fixing of aluminium hinges 100x63x4 mm ( Hundred in to sixty three in to four millimeter )complete as per architectural drawing and direction of Engineer-in- Charge (Cost of \"U\" beading and hinges will be paid for separately) |
| 15 | Providing and fixing mild steel grill of required pattern in wooden frames of windows etc.with mild steel flats, square or round bars etc. including priming coat with approved steel primer all completefixed to steel windows by welding as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 16 | Providing and fixing Anodised 300x16 mm ( three hundred in to Sixteen millimeter ) Aluminium sliding door bolt as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 17 | Providing and fixing 250x10 mm ( two hundred fifty in to ten millimeter ) Anodised Aluminium tower bolt (barrel type) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 18 | Providing and fixing 150 x 10 mm ( One hundred fifty in to ten millimeter ) tower bolt (barrel type) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 19 | Providing and fixing 125 mm ( One hundred twenty five )Anodised Aluminium handleswith plate 175 x 32 mm ( One hundred seventy five in to thirty two millimeter ) as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rateincluding the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt. |
| 20 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m²asper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 21 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/m²asper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 22 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubesasper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 23 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal bracesasper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 24 | Providing and fixing on wall face unplasticisedPVCrain pipe water pipes conformingfor unplasticised rigid PVC rain water pipeconforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion. Bend 87.5 degree 150 mm (one hundred fifty millimetre) dia bendasper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 25 | Providing and fixing on wall face unplasticisedPVCmoulded fitting / accessories for unplasticised rigid PVC rain water pipeconforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion. Bend 87.5 degree 150 mm (one hundred fifty millimetre) dia bendasper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 26 | Providing and fixing M.S. BP Sheet2 mm (two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) as per HP.PWD, specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer- in-charge including carriage of material within all leads , lifts and other incidentals.The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 27 | Providing and fixing 600x600mm (six hundred into six hundred millimetre) double charged / Ultra charged vitrified floor tiles of NITCO/ RAK/ Kajaria/ Johnson as per approved shade vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and coforming to IS: 15622 of approved make in all colours and shades, in skirting riser of steps over 12mm (twelve millimetre) thick bed ofcement mortar 1:3 (onecement istothreecoarse sand) jointing with grey cement slurry at the rate3.3 Kg./ sqm. (three decimal three kilogram per square metre including grouting the joints with white cement and matched pigments etc. complete asper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 28 | Kota stone slab20mm (twenty millimetre)thick in riser of steps, skirting, dado and pillars laid on 12mm (twelve millimetre) averagethick cement mortar 1:3 (onecement isto threecoarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing completeas per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 29 | Providing and laying polished granite stone flooring Grey/ black with round nosingin required design and pattern in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (one cement isto four coarse sand) laid and jointedwithcement slurry and pointing with white cement slurry admixture with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. Polished granite stone slab jet black, cherry red, Elite brown, cat eye or equivalent. asper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 30 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300( Three hunderd in tothree hundred ) mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm ( Twenty millimeter )thick cement mortar 1:4 (OneCement is to fourCoarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigmentsof matching shade complete. asper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 31 | Applying priming 2nd ( Second coat) With ready mixed red oxide zinc chromate primer of approved brand including manufacture on steel work asper the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 32 | Painting steel work with Deluxe multi surface paint to give an even shadetwo or more coats applied at the rate 0.90 ltr. (zero decimal nine litre) per 10 sqm. (ten square metre) over an under coat of primer applied at the rate 0.80 (zero decimal eight) litre per 10 sqm. (ten square metre)of approved brand and manufacture. as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 33 | Appying priming coat with ready mixed pink or grey primer of approved brand and manufacture on resinous wood and plywood as per the directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate isincluding royality, Malkana,Toll tax, sale tax, GST orother taxes imposed by the Government. |
| 34 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 square metre over an under coat of primer applied @0.75 ltr/10sqm of approved brand and manufacture within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.. |
| 35 | 6mm (Six milimetres) thick cement plaster in ceiling with cement mortar 1:3 (One cement: Three sand) for all heightswithin all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 36 | 15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 37 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 38 | White washing with lime to give an even shad New work (three or more coats) New work (three or more coats) the surface to remove all dirt,dust,mortar drops andwithin all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 39 | Making plinth protection 50mm( Fifty millimeter ) thick of cement concrete 1:3:6 (Oecement is to threecoarse sand (zone - III)is to sixgraded stone aggregate 20 mm ( twenty millimeter ) nominal size) over 75mm ( Seventy five milllimeter) thick bed of dry brick ballast 40 mm( forty millimeter ) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth finished with afloating cost of neat cement complete as per standard designwithin all leads, lifts of materials and other. incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. |
AI Tender Summary
Tender Timeline
Jan 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender