Tender For Supply Of Furniture For First Floor Newly Build Kurmi Bhaban Under Purulia-I Development Block In The District Of Purulia
Tender Value
18.17 Lakhs
Estimated cost
Bid Submission
10 Feb 2023
0 days left
EMD
36500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dulmi → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply Of Furniture For First Floor Newly Build Kurmi Bhaban Under Purulia-I Development Block In The District Of Purulia
BOQ
| Sl. No. | Item Description |
| 1 | Supply and placement of as per approve as per order Godrej Finnesse Table-5026+ ERU 3616 LHS TOP 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL).SIDE PANEL FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. MODESTY 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. TOP 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MMTHICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). SIDE PANEL FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. MODESTY 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 2 | Supply and placement of as per approve as per order Godrej Motion Study Chair SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H)Seat Size : 48.5 cm. (W) x 49.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and backcushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. . TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The \"S\" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit featurewhich should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm TWIN WHEEL CASTORS :5 nosManufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 3 | Supply and placement of as per approve as per order Godrej FU 1007 Visitor chair with the seat and back are made from 1.0cm thk. hot pressed water resistant, commercial plywood upholstered with P.U. foam and fabric. BACK SIZE: 42.0cm. (W) X 26.5cm. (H) SEAT SIZE: 42.0cm. (W) X 42.0cm. (D), having Polyurethane foam, moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 kg. on Hampden machine at 25% compression. The understructure assembly is a cantilever type mainframe made of dia. 2.54cm.(1”) x 14 BG M.S. E.R.W. tube and black powder coated. The armrests are made in twin tube form using dia.1.58cm. (5/8”) x 16 BG. M.S. E.R.W. tube and black powder coated.Manufacturer should be a certified member of BIFMA, SEFA-8 and should be following managementsystems as per ISO 9001:2015, ISO 14001:2004, OHSAS 18001:2007,AIOTA,Greenguard-VOC and energy management system Certificates as per ISO 50001:2011in accordance with the TÜV NORD CERT auditing and certification procedures for Design, Development, Manufacturing, Marketing, Sales, Supply and Servicing of Home & Institutional, Interiors, Furniture, Accessories & Related Products and Provide Solutions for Home & Work Space and should have Green Guard Certification for few of its products also should have the service set up at least at district headquarter.Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 4 | Supply and placement of as per approve as per order Godrej Aristo Table 2100 LH RU 1200 PDL Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated PedestalMade of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 5 | Supply and placement of as per approve as per order GodrejAristo Back Unit 1650W 750H Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council.Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 6 | Supply and placement of as per approve as per order GodrejAristo Table 2350 LH RU 1200 PDL Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management econdary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated PedestalMade of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 7 | Supply and placement of as per approve as per order Godrej Aristo Back Unit 1800W 750 H Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 8 | Supply and placement of as per approve as per order Godrej LASEDE HIGH BACK CHAIR seat/back assembly : the cushioned seat should bemade of injection molded plastic outer & inner. plastic inner should beupholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.the cushioned back should bemade of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 47.5 cm. (w) x 77 cm. (d) armrests: the armrest top should bemoulded from polyurethane(pu), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 stepsactive bio-synchro mechanism: the adjustable tilting mechanism should bedesigned with the following features:• 360° revolving type.• front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• tilt tension adjustment can be operated in seating position.• 5-position tilt limiter giving option of variable tilt angle to the chair.• seat/back tilting ratio of 1: 2• the mechanism housing should bemade up of hpdc aluminium black powder coated.4 seat depth adjustment: seat depth adjustment should beintegrated in the seat through a sliding mechanism. seat depth adjustment range should beof 6.0±0.5 cm. adjustable back support: back frame should beconnected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.pneumatic ht. adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.pedestal assembly the pedestal should behigh pressure die cast polishedaluminium and fitted with 5 nos. twin wheel castors. the pedestal should be65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors:the twin wheel castors should beinjection mouldedin black polypropylene. Overall Dimensions of ChairSeat Height -44.5 to 54.5 cm. Height -114-131.5 cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-66.5 cmManufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 9 | Supply and placement of Godrej Make as per design approve as per order Chair Beat Visitor SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam.* HIGH BACK SIZE:51.8 cm. (W) x 75.2 cm. (H) * MID BACK SIZE: 51.6 cm. (W) x 65.7 cm. (H)* SEAT SIZE:49.0 cm. (W) x 51.4 cm. (D).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.ARMRESTS: The adjustable armrest is designed with the following features : • Up-Down adjustment– 8 steps (8.0±0.5cm range) • Height adjustable armrest structure which is chrome plated & fitted with an armrest top. • Fixed Armrest Topis PU moulded over metal insert.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features• 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2.BACK HEIGHT ADJUSTABILITY: Back can be adjusted in 5 positions by manually. Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.PEDESTAL OPTION OF SLIDING SEAT MECHANISM : Seat can be slide horizontaly as per user convenience. Stroke of seat slide is 5 cm. This option is available for revolving pedstal type of chair. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 10 | Supply and placement of as per approve as per order Godrej Mingle 14 Seater Modular PLT Conference Table Worksurface : Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure : It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above.Modesty Panel : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns) Wire Management : An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injectionmoulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 11 | Supply and placement of as per approve as per order Godrej LASEDE HIGH BACK CHAIR seat/back assembly : the cushioned seat should bemade of injection molded plastic outer & inner. plastic inner should beupholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.the cushioned back should bemade of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 47.5 cm. (w) x 77 cm. (d) armrests: the armrest top should bemoulded from polyurethane(pu), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 stepsactive bio-synchro mechanism: the adjustable tilting mechanism should bedesigned with the following features:• 360° revolving type.• front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• tilt tension adjustment can be operated in seating position.• 5-position tilt limiter giving option of variable tilt angle to the chair.• seat/back tilting ratio of 1: 2• the mechanism housing should bemade up of hpdc aluminium black powder coated.4 seat depth adjustment: seat depth adjustment should beintegrated in the seat through a sliding mechanism. seat depth adjustment range should beof 6.0±0.5 cm. adjustable back support: back frame should beconnected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.pneumatic ht. adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.pedestal assembly the pedestal should behigh pressure die cast polishedaluminium and fitted with 5 nos. twin wheel castors. the pedestal should be65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors:the twin wheel castors should beinjection mouldedin black polypropylene. Overall Dimensions of ChairSeat Height -44.5 to 54.5 cm. Height -114-131.5 cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-66.5 cm. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 12 | Supply and placement of as per approve as per order Godrej Motion Study Chair SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H)Seat Size : 48.5 cm. (W) x 49.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and backcushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. . TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The \"S\" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit featurewhich should be inbuilt in seat base and the tension (return force) should be user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm TWIN WHEEL CASTORS :5 nos. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 13 | Supply and placement of as per approve as per order Godrej Chair FU 7212 The seat and back shall be made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of back shall be 49.5cm. (W) X 45.5cm. (H) and of seat shall be 49.5cm. (W) X 43.0cm. (D). The HR polyurethane foam shall be moulded with density =45+/-2 kg/m3and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be made of black-integraL skin polyurethane with 50-70 Shore Hardness and reinforced with M.S. insert. The armrests shall be scratch and weather resistant. The armrests shall be fitted to the seat with seat armrest connecting bracket made of0.3 ±0.022cm. thk.HR steel. The understructure shall be made of dia 2.54±0.03cm.x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). Overall Dimensions of Chair shall be Seat Height - 45.0cm, Height -84.0cm, Width & Depth of Chair as measured from pedestal - Width-55.0 cm and Depth-58.0 cm. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 14 | Supply and placement of as per approve as per order Godrej Matrix 3 Str Comm Arm SEAT SHELL : The seat shell should bea welded assembly of seat,back and side frame. The seat and back should bemade of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should bewelded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should bepowder coated ( DFT 40-60 microns ).The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance.* SEAT SIZE : 47.8 cm (W) x 44.6 cm (D) * BACK SIZE : 41.6 cm (W) x 23.0 cm (H) UNDERSTRUCTURE ASSEMBLY: Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should bepowder coated ( DFT 40-60 microns ).The leg assembly should befitted with shoes and levellers in Nylon. The leg structure should bedesigned with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould beof uneven flooring.Connecting beam should befitted with snap locking end cap.lt also aids in side-by-side understructure alignmentARM REST ASSEMBLY: Armrest assembly consshould be ts of armrest frame and armrest pad . The armrest frame should bemade up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should bepowder coated ( DFT 40-60 microns ). Armrest pad should beinjection molded in Nylon and should befitted onto the armrest frame.Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 15 | Supply and placement of as per approve as per order Godrej 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA.Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 16 | Supply and placement of as per approve as per order Godrej Storwel plain shall have an overall size of916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 17 | Supply and placement of as per approve as per order Godrej 4 Drawer Vertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided alongwith Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 18 | Supply and placement of as per approve as per order Godrej Pisa 2 Seater SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 146.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
| 19 | Supply and placement of as per approve as per order GodrejOAKLAND CORNER TABLE Overall Size :Width : 53.3cm Depth : 44cm Height : 54cmTop :Rubber wood ,Understructure : Rubber wood , Shade :Cherry , Construction :Knock down , Load Bearing Capacity :Coffee Table : 25 kg.Manufacturer must have following certifications for eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the date of bid opening (to be uploaded with bid): ISO 45001:2018, ISO 9001:2015, ISO 14001:2015, ISO 50001:2011 (All ISO certificate should be from NABCB authorized agency), BIFMA Membership, BIFMA Level 2 & 3 , GREENGUARD (from UL ), AIOTA , IGBC , Indoor Air Quality certificate by SCS Global, NABL ISO/IEC 17025:2017 Accredition. The product should have Greenguard Gold compliance certificate by UL. The product should have Greenpro certificate by CII-Green Products and Services Council. |
AI Tender Summary
Tender Timeline
Jan 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender