Military Engineer Services-MES has published Tender For Periodical Services Of Certain Temp And Permt Buildings And Repair To Flooring, Tiling, Door, Windows And Other B/R Related Works At Kotdwara Under Age I Lansdowne. Submission Date for this Tender is 22-02-2023. Tiles and Flagstones Tenders in lansdowne Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-02-2023 |
| Sl. No. | Item Description |
| 1 | M&L preparing of old plastered or un plastered surface of wallsand applying one coats of white wash/colour wash complete all as specified and directed. |
| 2 | M&L preparing of old plastered or un plastered surface of ceilingsand applying one coats of white wash complete all as specified and directed. |
| 3 | Taking down cement plaster of any description including raking outjoints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside cantt area distance not exceeding 1.5 KM. complete all as specified and directed. |
| 4 | Material & labour for Rendering 10 mm thick CM 1:6 using water proofing liquid compound as permanufacturer"s instructionson brick or concrete surfaces finished even & smooth without using extra cement including scaffolding complete all asspecified and directed. |
| 5 | M&L for 15mm thick plastering on fair faces of brick wall in two layers, Ist layer 10mm thick CM (1:6), and IInd layer 5mm thick CM (1:4), surface finished even and fair mixed with @ 200ml per bag WPC (liquid type) complete all as specified and directed. Note :- WPC (Liquid type) shall be measured and paid separately as supply only. |
| 6 | M&L for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:-(i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemperThe cost of all material T&P and labour required for preparation of surface are deemedto be included in the ratesquoted . (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor.The authorised applicator of manufacturer shall be got approved from AGE (I)before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved fromAGE (I) before application of distemper for each building. (v).The colour / shade will be all as approved byAGE (I) |
| 7 | M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:-1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor.The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v).The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor |
| 8 | M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700)along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper.The cost of materials, labour & T&P required for preparation of surface are demand to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor.The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v).The colour / shade will be all as approved by GE / AGE (I) (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor |
| 9 | M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700)along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge. Note: (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper.The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor.The authorised applicator of manufacturer shall be got approved from AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from AGE (I) before application of distemper for each building. (v).The colour / shade will be all as approved by AGE (I) |
| 10 | M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 11 | M&L for preparation of old painted steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 12 | M&L for writing letters or figures in black letters on white base (Block, Roman, Italic or Indian) not exc. 30 cm high ,stops, commas, short lines, dashes, hyphens, brackets etc.complete all as specified and directed. |
| 13 | Grubbing up trees/vegitables/grass etc.incl. cutting of trunk portion protruding over ground / roof / chajja etc. digging out roots, cleaning of all durt /fungus and filling holes and leveling off in CM , incl. removing of dismentling materials, Complete all as specified and directed. |
| 14 | Supply only liquid water proofing compound.ISI marked complete all as specified and directed. |
| 15 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each Complete all as specified and directed. |
| 16 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm butnot exceeding 4.0 Sq.m each Complete all as specified and directed. |
| 17 | Refixing of shutters in same opening of any descrption after easing and adjusting ,n exc 1.00Sqm Complete all as specified and directed. |
| 18 | Refixing of shutters in same opening of any descrption after easing and adjusting , exc 1.00Sqm but n exc 2.00 Sqm Complete all as specified and directed. |
| 19 | S&F 35mm thick molded WPC factory made 1005glaezed (wire mesh ) door shutter (confirming as per IS: 4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/cum manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, termite proof, fire retardent and having screw holding capasity Complete all as specified and directed. |
| 20 | S&F 30 mm thick molded WPC factory made 1005 solid door shutter (confirming as per IS :4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600 kg / cum manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. Make: Rajshree Plastiwood / Sintex & Floresta, Kumar Arch Tech |
| 21 | S&F 100mm x 65mm single rebated facotry made 100% solid WPC Door frame made from 100% LEAD Free (Single extruded process) material with density 780 kg/cum and manufactured by an ISO : 9001-2015 certified company , all as per specification. The door frame should be water proof, termite proof, fire retardent and having excellent screw holding capacity Complete all as specified and directed. Make - "ECHON" Brand or equivalent |
| 22 | S&F 125 mm x 65 mm double rebate factory made 100 % solid WPC door frame made from 100 % lead free( single extruted process) material with density 780 kg/cbm and manufactured by an ISO 9001-2016 certified compony all as per spesification.The door from should be water proof, termite proof,fire resistant and having exellent screw holding capacity Complete all as specified and directed. |
| 23 | S&F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked Complete all as specified and directed. |
| 24 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified. |
| 25 | S&F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified. |
| 26 | S&F 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified. |
| 27 | S&F 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked Complete all as specified and directed. |
| 28 | S&F Aluminium handles cast type anodised of size 150mm long ISI marked Complete all as specified and directed. |
| 29 | S & F Aluminium handles cast type anodised of size 125 mm long ISI marked complete all as specified. |
| 30 | S&F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked Complete all as specified and directed. |
| 31 | Material & labour for Rendering 10 mm thick CM 1:6on brick or concrete surfaces finished even & smooth without using extra cement complete all asspecified and directed. |
| 32 | S&F in repairs Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples Complete all as specified and directed. |
| 33 | S&F Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples. |
| 34 | Hacking out old broken glass (any thickness,more than 1.5 sqm , quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads or in wooden shutters complete all as specified and as directed. |
| 35 | S&F 04 mm thick glass sheet , ordinary quality and glazing with oil putty/wooden beads not exceeding 0.5 square metre in each pane complete all as specified. |
| 36 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregateas in bed block for insertion of hold fast incl necessary form work etc complete all as specified and directed. |
| 37 | S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm Complete all as specified and directed. |
| 38 | S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in Complete all as specified and directed. |
| 39 | S&F in repairs Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 Complete all as specified and directed. |
| 40 | M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified |
| 41 | M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10 mm dia as tle barcomplete confirming to Fe-410 -O etc complete all as specified and directed. |
| 42 | Supply & Fixing mild steel flat iron as in hold fast,wind ties over roof covering using steel of grade Fe-310-O or Fe-410-O including necessary drillingholes etc and similar works Complete all as specified and directed. |
| 43 | S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed. |
| 44 | S&F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc all complete all as specified and directed. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding / terrazo dado etc (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed. |
| 46 | Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 47 | M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished fair and even complete all as specified and directed. |
| 48 | M&L for coloured glazed ceramic tiles of any design and pattern, 300x450x 7 to 8mmthick, as in dado etc including 10mm thick rendering in CM (1:4), set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note: Shade of the tiles including Colour, design and pattern shall be got approved by AGE(I) |
| 49 | M&L for Non- skid coloured ceramictiles of any design and pattern, 7 to 8 mm thick, of following size exc 0.11 Sqm but n. exc 0.18 Sqm, as in floor etc with and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622.2006, Group B II with average water absorption between 3% to 6%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 5.0% (Max deviation). Centre & Edge curvature and warpage + 0.50% (Max deviation). Breaking strength 1000 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed. Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I). |
| 50 | M & L for 18-20 mm thick marble stone other than white and blacktable rubbed and polished in cooking plateforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match incl rounded exposed edge complete all as specified and including directed.over 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 51 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 52 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to mathc the shade of the slab including rubbing and polishing complete incl 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 53 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 54 | M & L for brick work with sub class old size , straight or curved on plan exc 6 m meanradius , built in cement mortor 1:4 complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
