Tender For Construction Of Community Toilet At Mahamilan Mahila Sanga Samabay Hall Under Unishbisa G.P Within Mathabhanga-Ii Panchayat Samity
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Feb 2023
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mathabhanga → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Community Toilet At Mahamilan Mahila Sanga Samabay Hall Under Unishbisa G.P Within Mathabhanga-Ii Panchayat Samity
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drain in all sorts of soils (including mixed soil but excluding laterite or sand stone) including removing spreading ro stacking the spoils within a lead of 75 m, as directed including trimming the side of trenches, levelling dressing an raming the bottom, bailing out water etc. as required complete. |
| 2 | Earth Work in filling of foundation trenches of plinth with good earth in layers not exceeding 15cmm including watering ramming etc.layer by layer complete ( payment to be made on the basis of measurement of finished quantity work) (a)With earth obtained from excavation of foundation(a)With earth obtained from excavation of foundation |
| 3 | C) (iii) With carried earth arranged by the contractor within a radius of of 3 km to 5 km including cost of carried earth. |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming anddressing bed to proper level and filling joints with local sand. |
| 5 | (II) Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement if any, in ground flooras per relevant IS codes. |
| 7 | Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every intersction, complete as per drawing and direction |
| 8 | Hire and labour charge for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slab, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto the roof of ground floor) (a) 25mm to 30 mm thick wooden shuttering as per decision & direction of Eng-in - Charge. G.Floor up to PL |
| 9 | G.Floor above P.L. |
| 10 | Brick work with 1st class bricks in cement mortar (1:6)(a) in foundation and plinth |
| 11 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound asper manufacturer\"s specification |
| 12 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 13 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.mi) Coloured decorativein Wall |
| 14 | in floor |
| 15 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. |
| 16 | Plaster (to wall, floor, ceiling etc) with sand - cement-morter including rounding off and chamfering corners as directed and racking outjoints including throating, noising and drip course, scaffolding / staging where necessary ( Ground floor) (excluding cost of chipping over concrete surface )i)With ( 1:6 ) Plaster c) 15mm thick |
| 17 | i)With ( 1:6 ) Plaster b) 20 mm thick |
| 18 | ii) With (1:4) Cement morter c) 10mm thick plaster |
| 19 | Neat cement plunning about 1.5mm thick in wall dado, window sills, floors, drains etc. using cement @ .152 cu m/100 sq m |
| 20 | (A) Supplying fitting and fixing door frame with M.S. angle as per drawing & direction of required section.The holes for counter sunk machine screw & nuts will be such as to fit 8 to 10 mm Iron screw. The counter sunk nut to be welded . The nuts are to be welded after careful checking with screw.All welding spots should be properly filed or rounded smooth including cost of welding hinges for hinge cleats , lugs for hasp bolt, socket bolt etc. and necessary M.S. clamps of 25mm x 6mm flat 225mm long as per direction welded to the frame fitted and fixed in position excluding cost of concrete. |
| 21 | Supplying fitting fixing M.S. Clamps for door and window frames made of flat bent bar, end bifurcated with necessary screws etc. bycement concrete (1:2:4) as per direction (cost of concrete will be paid seperately)(a) 40mm x 6mm flat - 250mm long |
| 22 | Iron butt hinges fitted and fixed with new scres. |
| 23 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with16mm dia rod with centre bolt and round fitting.c) 300mm long |
| 24 | Iron Socketbolt fitted and fixed complete(d) 225mm long x 10mm dia bolt. |
| 25 | a) MS or WI ornamental Grill of approved design joints continiously welded with M.S. W.I flats and bars for windows , railing etc. fitted & fixed necessary screws and lugs complete. |
| 26 | b) Primer one Coat on steel or other metal surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc. |
| 27 | A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary.(b) on steel or other metal surface (two coats)With super gloss (hi-gloss) -iv) Two coats ( with any shade except white) |
| 28 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of pproved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing).580x440mm |
| 29 | Supplying,fitting and fixing cast iron \"P\" or \"S\" trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately).100 mm dia S trap |
| 30 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992single socketed 3m length110 mm dia |
| 31 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992vent cowl110 mm dia |
| 32 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 178515 mm dia |
| 33 | Supplying, fitting and fixing bib cock or stop cock.(f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent)15 mm dia |
| 34 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer500 litre capacity |
| 35 | Labour for boring tube well of required dia . By Water Jet System though any type of soil strata -----------------------------tube well pipe and the bore.40 mm dia boring |
| 36 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).40 mm dia |
| 37 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.(i) 40 mm dia. |
| 38 | Applying decorative cement base paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concreted surface) as per manufactures specification(two coats) |
| 39 | Supplying fitting fixing plug of approved make conforming to I.S. specification.50 mm dia |
| 40 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work-(Other than SAIL/TATA/RINL) |
| 41 | Electrification with motor |
| 42 | GST(18%) |
| 43 | LABOUR CESS (1%) |
AI Tender Summary
Tender Timeline
Jan 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender