Indian Institute Of Technology-IITB has published Tender For Providing And Fixing Of Aluminum Partition And Ms Framing At Room No. 306 Of Block Iii At Iit Patna. Submission Date for this Tender is 10-03-2023. Aluminium Furniture Tenders in patna Bihar. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 06-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-02-2023 |
2 | 21-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-03-2023 |
3 | 03-Mar-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-03-2023 |
Sl. No. | Item Description |
1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion |
2 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
3 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
4 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
5 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
6 | Pre-laminated particle board with decorative lamination on both sides |
7 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
8 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
9 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge |
10 | Anodized (AC 15 ) aluminium |
11 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete |
12 | Dash Fastener/Chemical Fastener |
13 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
14 | Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. |
15 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weathersilicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete |
16 | Upto 5mm depth and 5 mm width |
17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
18 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
19 | Providing and fixing of Al tower bolts, ISI marked Anodised |
20 | 250*10 mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail