Uttar Pradesh Tourism Development Corporation has published Tender For Supply And Installation Of Water Sports Equipment In Yamuna Rever Near Hotel Triveni Darshan Distt. Prayagraj. Submission Date for this Tender is 31-01-2023. Commercial Marine Vehicle Tenders in prayagraj Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | HDPE Floating Jetty - Covered Cube System 1.1.Floating Jetty Modules should be made of High Grade High Density Polyethylene whose Melt Flow Rate should be less than 3g/ 10 min @ 190 Degree C and 21.6 kg Load. 1.2.Floating Jetty Module should be of L: 50 cm, B: 50 cm, H: 40 cm 1.3.Weight of the Floating Jetty Module should be 8 kgs - 10 kgs 1.4.Load carrying capacity should be Minimum 300 kgs/sqm 1.5.The shape of the Floating Jetty Module should be 3-Dimensional male-female interlocking such that the Floating Jetty Module caninterlock by themselves 1.6.Each Floating Jetty Module should have a Separate Anti-Skid Top Cover of 15 mm - 20 mm Thickness fitted in the cervix of themain module 1.7.The top surface should be fitted inside the side walls of the Floating Jetty Module and it should be bolted in such a way that thereis no leakage of water from the point in which bolt is fixed between top and below surface thus making the surface the best AntiSkid surface available worldwide 1.8.There should be one more surface below the top surface with a gap in between top surface and surface below to enableexpansion contraction of Floating Jetty Module which can also be used for passing of electric cables and water hoses if required 1.9.The lug thickness of the Floating Jetty Module should be 20 mm - 22 mm to ensure enough strength to the structure 1.10. For Boats parking on Floating Jetty, HDPE ‘U Shaped’ Floating Jetty male-female interlocking module of dimension L: 100 cm, B: 50 cm, H: 29 cm and weight 11 kgs - 12 kgs should be fixed on the floating jetty for smooth boat docking. The quantity of these modules will be dependent on-site requirement, and these can be interchangeable with the main modules if required 1.11.HDPE Heavy Duty Long Fender of minimum Length:130 cm -150 cm, Weight: 5 kgs – 7 kgs and with 3 lugs should be fixed onthe Floating Jetty System at required places using nuts and bolts of same material to protect Floating Jetty System 1.12.Heavy duty Pole Railings along with fitments should be fixed on the periphery of the Floating Jetty System 1.13.Floating Jetty should be anchored properly at the site using concrete blocks/ anchors, shackles, ropes, and any other anchoring accessory if required for proper functioning |
| 2 | PE 6 SEATER SPEED PASSENGER BOAT WITH 40 HP 4 STROKE OBM 1.1.Speed Passenger Boat should have Roto-moulded Double Skin Hull (Welding is not allowed) 1.2.Length of the Speed Passenger Boat should be between 560 cm to 600 cm 1.3.Width of the Speed Passenger Boat should be between 210 cm to 250 cm 1.4.Weight of the Speed Passenger Boat Hull should be maximum 800 Kg for easy handling 1.5.Capacity of the Speed Passenger Boat should be minimum 6 People 1.6.Hull Material should be Polyethylene (PE) & Hull Type should be ‘V’ Shaped 1.7.OBM: Minimum 40 HP 4 stroke Remote Operated Electric Start, Power Trim & Tilt Yamaha/Tohatsu/ Mercury OBM should be provided 1.8.OBM panel should be provided for fixing OBM 1.9.Console with Captain Seat should be provided 1.10.Towing Eye, Fender/ Rubber Strip and Grab Handles should be provided 1.11.Speed Passenger Boat should be CE/NMMA Certified or any IACS Member Certified (Certificate should be submitted with Technical Bid) Note: * Boat certificate of CE/NMMA or any IACS Member should be submitted along with Technical Bid. * Department may ask for submission of sample from any of the bidders for physical technical verification and so the bidder must submit a ‘Self-Attested Undertaking’ in technical bid with assurance of submitting sample of ‘PE 6 Seater Speed Passenger Boat with 40 HP 4 Stroke OBM’ within 7 working days at own cost with no liability of department * Single Indian Government work order of supply of Polyethylene Boat of minimum Length: 560 cm should be submitted in technical bid with proof of supply and location details * Offered Brand and Model Name should be clearly mentioned in the technical bid by the Bidder * Department may physically check the Item and so the Quoted Brand and Model should be in use by any Indian Government Department |
| 3 | PE SEARCH AND RESCUE BOAT WITH 30 HP 2 STROKE OBM 1.1.Rescue Boat should have Roto-moulded Double Skin Hull (Welding is not allowed) 1.2.Length of the Rescue Boat should be between 440 cm to 460 cm 1.3.Width of the Rescue Boat should be between 180 cm to 200 cm 1.4.Weight of the Rescue Boat Hull should be between 200 Kg to 250 Kg for easy handling 1.5.Capacity of the Rescue Boat should be minimum 8 People 1.6.Hull Material should be Polyethylene (PE) & Hull Type should be ‘V’ Shaped 1.7.OBM: Minimum 30 HP 2 stroke Tiller Yamaha/Tohatsu/Mercury OBM should be provided 1.8.OBM panel should be provided for fixing OBM 1.9.Mooring Ring, Mooring cleat, Drain plug and Storage Bench should be provided 1.10.Rescue Boat should be any IACS Member Certified (Certificate should be submitted with Technical Bid) Note:· *Boat certificate of any IACS Member should be submitted along with Technical Bid *Department may ask for submission of sample from any of the bidders for physical technical verification and so the bidder must submit a ‘Self-Attested Undertaking’ in technical bid with assurance of submitting sample of ‘PE Search and Rescue Boat with 30 HP 2 Stroke OBM’ within 7 working days at own cost with no liability of department *Single Indian Government work order of supply of Polyethylene Boat of minimum Length: 440 cm should be submitted in technical bid with proof of supply and location details *Offered Brand and Model Name should be clearly mentioned in the technical bid by the Bidder *Department may physically check the Item and so the Quoted Brand and Model should be in use by any Indian Government Department |
| 4 | Life Jacket 1.1. Life Jacket should have 2 Nos. Reflective Tape. One in the Front and one on the Back 1.2. Life Jacket should have 3 Nos. Polyester Webbing Belt attached with quick release Strong Buckle and Clip Slider Webbing Holder Easy to adjust 1.3. Life Jacket should have 1 Hold on Leg Strap with quick release buckle adjustable lock slider and emergency whistle Note: Department may ask for submission of sample from any of the bidders for physical technical verification and so the bidder must submit a ‘Self-Attested Undertaking’ in technical bid with assurance of submitting sample of ‘Life Jacket’ within 7 working days at own cost with no liability of department |
| 5 | Life Buoys MMD approved Ring Shaped Life Buoys |
| 6 | 33 SEATER Catamaran Hull Passenger/Excursion Boat(FRP)with OBM Specification 1.1. Single Deck FRP Catamaran Mini Cruise Cum Party Boat for 33 + 4 persons fitted with 75 to 90 hp Mercury/Yamha/Tohatsu 4-stroke EFI OBM. 1.2. Speed 12 to 15 knots 1.3. Length -not less than 10m 1.4. Beam 5 to 5.5m 1.5. Depth 1.2 to 1.5m 1.6. Hull Thickness : 10 to 12 mm 1.7. Bulkhead : 08 no. 1.8. Weight : not less than 3 mton 1.9. Engine: OBM 75 to 90 hp 4 S EFI , Front steeringwith remote control, electric start with battery. Mercury/Yahma/Tohatsu 1.10. Composite illuminated Canopy, Front Steering with Wind Shield and Remote Control System with 8 pneumatic fenders. . Life Jackets, two life buoys. Navigational lights. Bow Anchor. 1.11. Non Skid FRP Deck 1.11.1. The Boat should be as per IRS/IACS/CE/ISC norms and manufactured by any IRS/IACS/CE/ISC approved yard. The IRS/IACS/CE/ISC norms compliance certificate to be issued by any qualifiedany State Maritime Board or authority or any higher authority in the field. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
