|
| 1 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed. |
| 2 | Removing of excavated surplus soil to a distance n. exc 50 m and depositing wheredirected at a level n. exc. 1.5 m above the starting point complete all as specified and directed. |
| 3 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 4 | M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid. |
| 5 | Supply & laying sub class \"B\", class designation 75 bricks of old size, laid along alignment of cable as protection to cable in trenches including taking out old u/s bricks complete all as specified and directed. |
| 6 | S&F in repair 50 mm bore galvanised steel tubing, medium grade with necessary fittings, laid under road crossing, for cable protection complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 7 | M&L for cutting the tarmac / hard standings in road and excavating trenches across the road in size not exceeding 0.45 m wide and 0.6 m depth for laying cable including refilling earth & making good top surface of the disturbed portion with 100mm thick PCC 1:3:6 / bituminous mix as per existing &matching with the surroundings complete all as specified and directed. |
| 8 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete including demolition of old PCC complete all as specified and directed. |
| 9 | M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in copings, benching and the like etc. including necessary formwork & demolition of old concrete complete all as specified and directed. |
| 10 | S&F in repair analog time switch 3 module suitable for street light timer panel / DG AMF panel / star delta starter panel complete all as specified and directed.Make :- L&T / Legrand / Siemens / ABB / Schnieder / Havells |
| 11 | S&F in repair 3 / 4 Pole contactor suitable for street light timer panel / DG AMF panel complete all as specified and directed.Make: L&T / Indoasian / GE / BCH / HPL / C&S / ABB / Siemens |
| 12 | Taking down defective street light fitting of any make / type / capacity from top of pole / walls / high mastat a height not less than 7.0 m, at any location, for repair work and re-fixing the same after repair work including testing and commissioning complete all as specified and directed.Note:-(i) M&L forItems like ballast, lamp, ignitor, capacitors, electronicdrivers, surge protection devices etcshall be measured and paid separately under relevant items. However rate quoted shall deemed to include cost of minor spares like nut bolts, circle clips, clamps etc (if reqd)(ii) Repairs to LED panel is not included in scope of this item and the same shall be measured and paid separately.(iii) Necessary T&P like ladders etc required to take the fitting down shall be arranged by the contractor. |
| 13 | Supply only electronic driver of make as per existing, suitable for 120 to 150W street light / flood light / post top lantern complete all as specified and directed. |
| 14 | All as per serial Item No. 13.00 above but suitable for 90 to 100 W street light / flood light / post top lantern |
| 15 | All as per serial Item No. 13.00 above but suitable for 70 to 80 W street light / flood light / post top lantern |
| 16 | Supply only surge protection device of capacity 10 KV & make as per existing, suitable for street light / flood light / post top lantern complete all as specified and directed. |
| 17 | M&L for dismantling defective LED street light fitting of any make / type and of capacity 120 to 150 W, strip opening the electronic driver & LED panel complete including replacement of driver & SPD (if reqd), identifying defective LEDs, supply and replacement of defective LEDs, soldering, supply & replacement of pitted control wiring from LED panel to driver etc, testing and commissioning complete all specified and directed by Engineer-in-Charge.Note :- The rate quoted is not inclusive of taking down, refixing of street light fittings, supply of electronic driver and surge protection device and the same shall be measured and paid separately under relevant item. |
| 18 | All as per serial Item No. 17.00 above but LED street light fitting of capacity 90 to 100 W |
| 19 | All as per serial Item No. 17.00 above but LED street light fitting of capacity 70 to 80 W |
| 20 | S&F in repair LED street light fitting of capacity 60 watt, IP-65 (minimum), integrated typewith high efficiency electronic driver, SPD of capaciity 10 KV, pressure die cast aluminium housing with toughened glass cover, internally prewired and including electrically connecting, necessary clamps complete all as specified and as directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells / BajajNote:- Supply of new GI Pipe bracket if requiredshall be measured and paid seperately under relevant item. |
| 21 | All as per serial Item No. 20.00 above but LED street light fitting of capacity 90 W |
| 22 | All as per serial Item No. 20.00 above but LED street light fitting of capacity 100 W |
| 23 | All as per serial Item No. 20.00 above but LED street light fitting of capacity 120 W |
| 24 | S&F in repair LED flood light fitting of capacity 100 watt, IP-65 (minimum) with luminous efficacy 100 Lumen/watt (minimum), SPD of capaciity 10 KV, pressure die cast aluminium housing, toughened glass cover, internally prewired and including electrically connecting necessary clamps & taking down old unserviceable flood light fittings from any position at a height exceeding 7.5 m complete all as specified and as directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells / Bajaj |
| 25 | All as per serial Item No. 24.00 above but LED flood light fitting of capacity 150 W |
| 26 | S&F in repair 20 watt LED post top lantern with polycarbonate opal diffuser, pressure die cast aluminium housing, IP-65 (minimum),high efficient constant current electronic driver including electrically connecting complete all as specified and directed.Make :- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells / Bajaj |
| 27 | All as per serial Item No. 26.00 above but 40 watt LED post top lantern |
| 28 | Supply & laying in repair LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 25 Sqmm x 4 Core, laid in trenches / duct / on pole complete all as specified and directed.Make :- Havells / KEI / Polycab / Gloster / Asian Cables / Finolex |
| 29 | All as per Sl item No. 28.00 above but cross sectional area 16 Sqmm x 4 Core |
| 30 | All as per Sl item No. 28.00 above but cross sectional area 10 Sqmm x 4 Core |
| 31 | S&F in repair steel tubular swaged poles conforming toIS-2713, complete with cast iron base plate, finial taper plug, bolts, nuts & screws, type 410 SP-31 (9 m long) and including painting with two coat of aluminium paint over a coat of primer on exposed surfaces and black bituminous paint on steel surface embeded in concrete and 03 Nos band / strips with white synthetic enamel paint, 30 cm wide each at a distance of 30 cm from top of plinth block and numbering of poles complete all as specified and directed.Note:- Excavation, earth work and PCC work will be measured and paid for separately under respective items.Make of Pole:-Calcutta Poles & Tubes / Skipper Limited / Jindal Steel / National tubing Co / Bombay tube & StoreMake of paint :- Jotun India Pvt Ltd / Asian Paints / Berger / Jenson & Nicholson Paints Ltd / Shalimar Paints Ltd |
| 32 | S&F in repair PVC insulated 3 core multistranded sheathed cable with 1.5 Sqmm copper conductor for connection of street / security light etc, complete all as specified and directed.Make:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL |
| 33 | S&F in repair 12KW, three phase, automatic street light control panel with and including digital timer switch for automatic switching on / off street light as per set time through programmable 24 hour switch, 65A, TP power contactor, 63 A TPN MCB, wall / floor mountable, IP 54 (dust and vermin proof) enclosure made out of CRCA sheet duly powder coated, conforming to IS/IEC 60954-4-1, in-built- short circuit protection, locking arrangement with padlock and panel lock complete all as specified and directed.Make:- Havells / GE / Kakatiya energy system Pvt Ltd / Indo Asian |
| 34 | S&F in repair weather proof cable junction box of size not less than 250 mmx 200 mm x 100 mm with terminals, IP 66 (minimum), suitable for outdoor installation,suitable for 10 to 25 sqmm cable, including 01 No 5/6 Amp MCB, 50 Amp rated 3 pole connector, fixing arrangement with MS flat of size 25 x 3 mm with necessary nuts, bolt and washers complete all as specified anddirected.Make :- Hensel / Sintex Industries Ltd. / C&S electric Ltd. / National |
| 35 | M&L for bracket suitable for street light made out of GI pipe light grade of 25 mm bore & 1.20 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 6 mm MS flat, nuts, bolts & washers etc,& painting the bracket with two coat of aluminium paint over a coat of red oxide primer & taking down complete all as specified and directed.Make of Pipe :- Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 36 | All as per Sl item No. 35.00 above but made out of GI pipe light grade of 40 mm bore |
| 37 | M&L preparation of old painted surface of existing 9 m long old steel poles with connected cross arms, cable protection pipes, clamps, street light brackets etc, and including applying one coat of aluminium paint on complete height of the pole and applying one coat of synthetic enamel paint upto 0.80 m height from the top of coping with multi colour strips as per the colour code, writing pole details & applying one coat of white wash on pole coping complete all as specified and directed.Make of paint :- Jotun India Pvt Ltd / Asian Paints / Berger / Jenson & Nicholson Paints Ltd / Shalimar Paints Ltd |
| 38 | All as per Sl item No. 37.00 above but 11 m long old steel poles |
| 39 | S&F 2 inches wide reflective tape with high-performance adhesion, water resistant including fixing around the circumference of pole at an approximate height of two meters complete all as specified and directed.Note:- Unit rate quoted shall deemed to include cost for arrangment of all T&P such as ladder etc. reuired. |
| 40 | S&F in repair 1 x 9 / 10 watt LED bollard light fitting, inverted pyramid tripod type shape, IP-65, including hot dip galvanized pole, driver, all fixing arrangement etc. including electrically connecting complete all as specified and directed.Make:- C&S / Indiabulls LED / Crompton / Surya / Orient Electric Ltd. / HPL / Jaquar & Company Pvt Ltd / Eveready IndustriesIndia Ltd. / Havells / Bajaj |
