Zilla Parishad-ZP has published Tender For Installation Of Highmast Light In Front Of Kalua Kalimandir,Mouza-Kalua,J.L-589,Plot No-138,Under Kharagpur-Ii Devlopment Block With The Fund Of Beup(2021-2022). Submission Date for this Tender is 31-01-2023. Street Lighting Tenders in mouza West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply Including transportation handing chargees,errection and commissing of 500 mm x 500 mm x 700mm length x depth x Height ) Outdoor type one side Opening Sheet steel pillar box of 3.15 mm thick CRCA Sheet with top cover (5mm thick Ventilator arrangement with both side hinged type door arrangement with mechanical looking arrangement in built handle pillar box having two coat of synthetic enamel paint powder coated over red oxide primer,with pad lock arrangement including providing godrej make brass and weather proof lock and key (3 nos of kyes with the provision for following accessories. 1.Supply and fixing 32A DP ISOLATOR 1 no. 2.Supply & fixing 10A ,220V Volt SP MCB switch -2no. Timer(L&T) (24hrs.Dial) with NO/NCpower contact(L&T). Devices with box -1 no.Complete arrangement wiring with suitable size PVC insulated stranded FR copper wire with socket lugs,erection of pillar box at ground by Brick,sand,cement,Plastering,Neat cement finishing 600 mm above Ground level inside the brick padestral will be filled up by loose sand where incoming and out going cables will be rest. |
| 2 | Supply of 09mtr long steel tubler pole( 410 sp-51)With sole plate & cap etc in CC foundation, Outside Diamenter and Thickness of Sections Bottom-139.7 x 5.40mm .Outside Diamenter and Thickness ofSectionsMiddle-114.3 x 5.40 mm.Outside Diamenter and Thickness of Sections Top-88.9 x 3.25 .Inbuilt Street Light Junction Box & 16A 4way Connector. (MAKE-UTKARSH/BAJAJ/JK/CG/BACON POWER & TRANSMISSION/EQUIVELENT MAKE) |
| 3 | Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. Above 9.0 mtr. Size 0.6x0.6x1.91 mts |
| 4 | Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole |
| 5 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. Above 9.0 mtr. long pole (i) One coat of red lead/Zinc chromate priming |
| 6 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. Above 9.0 mtr. long pole (ii) 1st coat of synthetic enamel paint over the primer |
| 7 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. Above 9.0 mtr. long pole (iii) 2nd coat of synthetic enamel paint over the 1st coat |
| 8 | Supply and fixing of 220V AC/50HZ-150W flood light type area lighiting luminaries with die cast Al housing and heat resistant LED luminaries complete set (IP-66 with all necessary acessories) make- CG/HAVELLS/PHILIPS-as approved |
| 9 | Supply & laying 1.1 KV grade 2C 10 sqmm XLPE/PVC AL armoured cable in underground trench 460 x 760 mm as per schedule of works PWD (Elect.) MakeHavells/Gloster/KEI/Polycab). |
| 10 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :For 2 core-upto 10 sqmm |
| 11 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :2 core 10 sqmm cable |
| 12 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.50 mm dia |
| 13 | Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil |
| 14 | Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts . |
| 15 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. |
| 16 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. |
| 17 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. No. 6 SWG |
| 18 | Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm.thick made with RCC 1:1 1/2 :3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm.mesh) and fixed with necessary nuts & bolts on two RC precast posts 100mm x 150mm .of height 2.65m of which top 750mm .is of section 100 x 13 mm and 1.90 Mtr.above GL & 0.75 Mtr. below G.L .including digging hole,repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc.complete including painting two coats on both faces lettering sign. marks etc.as per direction of the engineer incharge.(The rate is inclusive of cost of Inforcement,concrete,shuttering,nuts & bolts,washer etc.complete.) |
| 19 | Add GST @ 18% |
| 20 | Add Cess @ 1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
