Tender For Special Repair To Roofing Of Godowns With Iron Profile Sheets At Fsd Bhikhiwind Under District Amritsar
Tender Value
23.37 Lakhs
Estimated cost
Bid Submission
04 Feb 2023
0 days left
EMD
46760
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhikhiwind → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Roofing Of Godowns With Iron Profile Sheets At Fsd Bhikhiwind Under District Amritsar
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. |
| 3 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos sheet. |
| 4 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of.25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 5 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : ridges same profile sheet (500-600mrn), |
| 6 | Providing gola 75 X 75 min in cement concrete 1:2:4 (1 cement:2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cemenet:3 fine sand) as per standard |
| 7 | Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacture over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. |
| 8 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing :1:2:4, (1 Cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). |
| 9 | Supply, installation, testing & commissioning of turbo ventilators size 22\" in stainless steel 430 grade with approximate weight 4.85kg having a CFM-7 kg per hour 2440 with blade length 369mm wings of 80mm & following specification turbo ventilators available in stainless steel size 22\"55 grade 430 no of outer wings =24(22\") no of inner wings =6(22\") fan base-nylon top and bottom 55430 inside material-nylon fan blade OD600 mm (for 22\") nylon blade ring=560mm. Total fan height 360mm self lubricating bearing) for 22\") including the cost of necessary cutting of iron profile sheet for fixing of turbo ventilators including providing & fixing UV Stabilised Fibreglass reinforced plastic sheet to be not les than 2 mm thickness and matching iron profile sheet corrugation. |
| 10 | Credit old ACC sheets received from dismantling roof (Market Rate) (Market Rate) |
| 11 | Credit J hooks available from dismantling of roof of godown and veranda. (Market rate). |
| 12 | White washing with lime to give an even shade : Old work (one or more coats) |
| 13 | Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shed two or more coats on new work. |
| 14 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting. unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
AI Tender Summary
Tender Timeline
Jan 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 04, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 06, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender