Public Administrative Department Local Bodies Closing in 0 days TDR #35923391

Tender For Construction Of Rural Motor Road From Semisera To Semi And Narshiya Village Motor Road From Sanglakoti Pokhra Main Motor Road, Pauri Garhwal, Uttarakhand.(For Stage -I)

Issued by Local Bodies · pauri, Uttarakhand
Tender Value
2.15 Crore
Estimated cost
Bid Submission
13 Feb 2023
0 days left
EMD
4.30 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
pauri → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Rural Motor Road From Semisera To Semi And Narshiya Village Motor Road From Sanglakoti Pokhra Main Motor Road, Pauri Garhwal, Uttarakhand.(For Stage -I)

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 06-Feb-2023 Date Corrigendum Date 13-Feb-2023

BOQ

Name of Work: Construction of Rural Motor Road From SEMISERA To SEMI And NARSHIYAVillage Motor Road FromSanglakoti Pokhra Main Motor Road, Pauri Garhwal, Uttarakhand.(For Stage -I)
Sl. No. Item Description
1Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1
2Excavation in Hilly Areas in Ordinary Rock by mechanical means not requiring blasting Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material with a lift upto 1.5 m and lead upto 20 m as per Clause 1603.2.
3Excavation in hilly areas in hard rock requiring blasting, by mechanical means, lift upto 1.5 m and disposal of excavated rock upto a lead of 20 m as per Clause 1603.2.
4Removal of Unsuitable Soil with Disposal cu.m Removal of unsuitable soil including excavation, loading and disposal upto 1000m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 asper Technical Specification Clause 302.3.11
5Providing and laying of boulder apron laid in wire crates with 4 mm dia G.I. Wire conforming to IS: 280 & IS: 4826 in 100mm x 100mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification ofand as directed by Engineer in charge.
6Clearance of land slides in soil and ordinary rock by a bull-dozer D cu.m 80 A-12, 180 HP and disposal of the same on the valley side
7Earth work in Excavation foundation forretaining walls, breast walls in all types of soils and rocks including lead, lift and disposal of surplus material as per direction of engineer-in-charge by the direction in Engineer-in charge work to be execuated as per specification a rate of above given item
8Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6
9Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 In cement mortar (1:5)
10Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications
11Providing and laying reinforced cement concrete in open foundation as per drawing and technical specifications Clauses 800, 803, 1202 & 1203R.C.C M 25
12Supplying, fitting, and placing TMT bar reinforcement in substructure complete tonne as per drawing and technical specifications Clauses 1002, 1010 and 1202. (The reinforcement steel shall be as per clause no. 2011.3.1 of specifications (First Revision\"2014) and IS 1786:2008 clause no. 1.6)
13Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
14Plain/reinforced cement concrete in open foundations complete as per drawings and technical specification Clauses 802, 803,1202 ans 1203 Nominal mix 1:2:4
15Cement Concrete (PCC M-30) Pavement:- Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383,maximum size of coarse aggregate not exceeding 25 mm, mixed in aconcrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.
16Random Rubble stone masonry for structure laid dry by locally available approved stone, including supply of all materials, labour, T&P etc required for proper completion of work as per drawing & as per specification for retaining walls, breast walls & other similar structures as directed by Engineer-in-Charge.
17Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing andtechnical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction
18Longitudinal Katcha drain
19Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 In 1:4 cement mortar
20Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction
21Providing & Laying M10 grade plain cement concrete in open foundation as per specification including all material labour T&P etc. as directed by Engineer in charge.( for Causeway ) 1:3:6 Hand Mixed
22Providing and fixing of semi refelctive cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white coulour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roades of required shade and colour supported and wlded on 47mm x47mm x12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600mm, 600 mm below ground level as per approved drawing clause 1701.2.2800mm x600mm rectangular.
23Providing and fixing Logo of RWD Project each providing and fixing of typical RWD informatory sign board with logo as per MORD specifications and drawing. There MS Plates of 1.6mm thick, top and middle plate duly welded with MS aflat iron 25mmx5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mmx75mmx75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mmx450mmx600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x47mm of 12SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superor quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1
24Construction of reference pillars(totally under ground) of length km200mm, width 200mm and height 300mm) as per Fig. 1600.1 (b)and Technical Specification Clause 1602.1 ofspecificationsfor rural roads.
25Construction of back pillars , of length 300mm, width 300mm and km height 400mm of which 100 mm shall be below ground level as per Fig. 1600.1 (b) and Technical Specification Clause 1602.3 ofspecifications for rural roads.
26Reinforced cement concrete M15 grade kilometre stone/local stone of standarddesign as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 For Km Stone.
27Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408 Using Gravel mix soil.
28Construction of Embankment with Material Obtained from Roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5
29Construction of coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work as per direction of Engineerin- charge. (As per PWD Uttarakhand specifications
30Typical Kerb and channel Drain (K C Drain)
31EMERGENCY MAINTENANCE Major Slip Clearance in all Type of Soil ,rock and boulders including cost of all material , machine,T&p etc required for proper compeletion of work as per mord specification of work 1611 (MISS 1-10-1) 1ST YEAR
322ND YEAR
333RD YEAR
344TH YEAR
355TH YEAR
36Deploying Hydraulic excavator of 0.90cum bucket for clearence of Major slip in all type of soil rock and boulders including its operator ,pol, andall other charges required for proper compeletion of work(PMC014) 1ST YEAR
372ND YEAR
383RD YEAR
394TH YEAR
405TH YEAR
41Providing and laying of boulder apron laid in wire crate with 4 mm dia GI wireconforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and techniacal specification 1301 (MORD 14-2)1ST YEAR
422ND YEAR
433RD YEAR
444TH YEAR
455TH YEAR
46Coolie Walling including supply of all material, labour, T&P,royalty etc. required for proper completion of the work,as directed by Engineer-in-charge and as per PWD specifications 8.90 (For opening communication only)(MISS 1-6) 1ST YEAR
472ND YEAR
483RD YEAR
494TH YEAR
505TH YEAR
51ROUTINE MAINTENANCE 1ST YEAR
522ND YEAR
533RD YEAR
544TH YEAR
555TH YEAR

AI Tender Summary

OUR REF NO 35923391
AUTHORITY Local Bodies
TENDER VALUE 2.15 Crore
LAST DATE 13-02-2023
Authority
Authority Name District Collector
Work Description Construction Of Rural Motor Road From Semisera To Semi And Narshiya Village Motor Road From Sanglakoti Pokhra Main Motor Road, Pauri Garhwal, Uttarakhand.(For Stage -I)
Basic Detail
Tender No 1527/RWD/T.I-02/2022-23
Bidding Type Tender
Location
City pauri
State Uttarakhand
Key Dates
Publish Date 06 Feb 2023
Submission Date 13 Feb 2023
Open Date 13 Feb 2023
Finance
Tender Value 2.15 Crore
Tender Fee 5900
EMD 4.30 Lakhs
Exemption Not Available
Document List
88073580-c7dc-4e6d-957e-2bb791fd4d3b.html
Tendernotice_1.pdf
Tendernotice_2.pdf
BOQ_66255.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Feb 06, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 13, 2023
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Feb 13, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 13, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

88073580-c7dc-4e6d-957e-2bb791fd4d3b.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

xls

BOQ_66255.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender