Tender For Annual Mtc Of Hsvp Reserve Store Tosham Road, Hisar. Re Placement Of Damaged Roof Of Store By Providing And Fixing Fiber Grass Reinforced Plastic Sheet And Door And Shutters In Reserve Store Hsvp Hisar And All Other Works Contingent There, Hisar-Haryana
TDR : 35917073
Tender Notice
BOQ
Expired
Hisar
Haryana
Tender For Annual Mtc Of Hsvp Reserve Store Tosham Road, Hisar. Re Placement Of Damaged Roof Of Store By Providing And Fixing Fiber Grass Reinforced Plastic Sheet And Door And Shutters In Reserve Store Hsvp Hisar And All Other Works Contingent There
Name of WorkA/Mtc of HSVP Reserve Store Tosham Road, Hisar. “Re-placement of damaged roof of store by providing & fixing fiber glass reinforced plastic sheet & door and shutters in Reserve Store HSVP Hisar and all other works contingent thereto”. (including one year mtc. and defect liability period free of cost). A/C Rs. 1.95 Lacs
Sl. No.
Item Description
1
9.32 Providing & fixing UV stabilised fibreglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated \"J\" or \"L\" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.9.32.2 2 mm thick flat
2
13.3 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:13.3.1 13.3.1 Profile B13.3.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 6 Mts to 7 Nos. = 40 Rmt
3
12.37 Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:12.37.2 30 mm thick including ISi marked Stainless Steel butt hinges with sqm necessary screws
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
