|
| 1 | Earthwork in excavation by mechanical means (Hydraulicxcavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil |
| 2 | Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand) |
| 3 | 12mm cement plaster of mix -1:4(1 cement : 4 fine sand) |
| 4 | Providing and laying in position cement oncrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) |
| 5 | Providing and laying filter media using HBG metal of 63 mm size to a required thickness |
| 6 | Providing and laying filter media using HBGmetal of 40 mm size to a required thickness |
| 7 | Providing and laying filter media using HBGmetal of 20 mm size to a required thickness |
| 8 | Providing and fixing upto floor five levelprecast cement concrete string or lacing courses , copings, bed plates, anchor blocks, plain window sills, shelves , louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost ofrequired centering , shuttering complete - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 9 | Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more |
| 10 | Providing, laying and jointing UPVC metrepipes(Finolex /jain/Supreme /Truebore/ Nandi)(0.6Mpa)conforming to IS specifi-cation 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testingquipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces, couplers, reducer,endcaps etc.,complete all as per IS and CPWD specification. - 63mm dia. |
| 11 | Providing, laying and jointing UPVC pipes (Finolex/jain/ Supreme/ Truebore /Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transpor tation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testingipment,including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer,endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia. |
| 12 | Providing and fixing in position UPVCmoulded elbow (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 63mm dia |
