Tender For Urgent Repairs To The Primary Health Centre Quepem In Quepem Constituency.
Tender Value
29.60 Lakhs
Estimated cost
Bid Submission
06 Feb 2023
0 days left
EMD
59219
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
quepem → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Urgent Repairs To The Primary Health Centre Quepem In Quepem Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead.a) Of area 3 sq.m. and below. |
| 3 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm |
| 4 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.With cement mortar 1:4 (1 cement: 4 fine sand) |
| 5 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.d) Second class matti wood. |
| 6 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws:b) Second class Indian teak wood. |
| 7 | Providing and fixing 38 mm thick louvered shutters with fixed or movable venetians 12 mm thick for windows including bright finished or and black enamelled, iron hinges with necessary screws.a) Second class Indian teak wood |
| 8 | Providing and fixing chromium plated brass handle with necessary screws etc. complete.b) 100mm. |
| 9 | Providing and fixing chromium plated brass 100mm. rim latch and lock and a pair of knobs with necessary screws etc. complete (Indian make of approved quality). |
| 10 | Providing FRP door shutters 35mm thick with frame size in clear opening of 0.75x2.10m hinges and screws complete. |
| 11 | Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20mm x 5mm size with top and bottom rails of T-iron, 40 x 40 x 6 mm with 38 mm dia. Steel pullys completely bolts locking arrangement, stopper, handles including applying a priming coat of red lead paint. |
| 12 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows.Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section.b) Plain glass. |
| 13 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by screws.a) Plain grill. |
| 14 | Providing and fixing coloured ceramic tiles spartek or equivalent of 12 \" x 12\" (399x150 mm cut size) 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) and jointed with cement slurry complete. |
| 15 | Providing and fixing coloured ceramic tiles spartek or equivalent of 12\" x 12\" size and 6 mm thick in floors thread of steps and landing on 25 mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 16 | Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigment etc., completeb) 600 x 600 mm light Shades. |
| 17 | Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.b) 600 x 600 mm - light Shades |
| 18 | Chequered terrazo tiles 22 mm thick with marble chips of sizes upto 6 mm in floor on 25 mm thick bed of lime mortar 1:2 (1 lime putty: 2 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing completed.c) Dark shade using ordinary cement |
| 19 | Demolishing brick work in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 20 | Cuddappah stone slab machine cut flooring over 20mm (average) thickness of cement mortar 1:4 (1 cement: 4 coarse sand laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete - 25 mm thick. |
| 21 | Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing completea) Jet black |
| 22 | 12mm cement plaster 1:4 (1 cement: 4 fine sand) |
| 23 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 25 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 26 | Applying priming coat with ready mixed red lead paint of approved brand and manufacture on steel work.Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 27 | Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. |
| 28 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA TATA,VIZAG, JSW,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 29 | d) Providing and fixing Colouron Plus galvulium roofing Sheets of 0.45mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 30 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete.a) 140 mm nominal size. |
| 31 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.d) Flat back wash basin size 550 x 400mm with a single 15 mm C.P. brass pillar taps. |
| 32 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers. |
| 33 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws.b) 600 x 20 mm size. |
| 34 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:c) 45 cm (18”) length . |
| 35 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement: 5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard designd) Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg) |
| 36 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:a) 110 mm dia. |
| 37 | b) 75 mm. dia. |
| 38 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.a) 110 mm dia |
| 39 | b) 75 mm. dia. |
| 40 | Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, without door:b) 75 mm. dia. |
| 41 | Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993a) 15mm nominal bore. |
| 42 | Providing and fixing NICKEL chrome plated copper alloy Fancy two way long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 a) 15mm nominal bore. |
| 43 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalent. Confirming to IS 8931;1993 a) 15mm nominal bore. |
| 44 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).b) 20 mm outer dia CPVC pipe. |
| 45 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe)c) 25 mm nominal outer dia pipes. |
| 46 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete.b) Overall size 610mmx460mm (24\"x18\") bowl size 560mmx410 mmx215mm (22\"x16\"x81/2\") Glossy. 1.0mm thick. |
| 47 | Add 20% adohac increase onall items as per Corrigendum. No. 3-3-05/SSW-PWD/Vol.i/2022-23/16 dt. 17/08/2022 |
AI Tender Summary
Tender Timeline
Jan 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender