Tender For Light Arrangement Work In Various Parks Of Ward No 71
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
30 Jan 2023
0 days left
EMD
19000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kota → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Light Arrangement Work In Various Parks Of Ward No 71
BOQ
| Sl. No. | Item Description |
| 1 | Supply and installation of2 Lane Mini Tea Coffee VendingMachine having following Specification :- Machine can dispense 2 different Hot Beverages. Power consumption 700 Watts,Power Source 220/110V-50/60Hz-1P,Start Up Time Upto 13 Minutes,Premix Canister/Capacity 2 No.s Upto 1.1 Kg each,Dispensing Rate Upto 22 cups in one time of 100 m,Front Door ABS Moulded,Hot Water Tank Material/Capacity SS 304 Stainless Steel/3 Litres complete in all respect. Make Atlantis,Nescafe,sawggers,Godrej and other equivalent make. |
| 2 | Supply , installation, testing and commissioning of 2-way 60 watt Compact PA Wall Speakerfor wireless conference systemwhich have following specification . (1)High fidelity 2 way PA wall speaker comprises of a Water resistant PP coated cone woofer , a titanium dome tweeter and 2 way crossover network. (2) Power Rating- 60W RMS/90W Max W max., Power Taps- 60W, 60/40/30/20/10WW, Impedance / voltage - 8 ohm/ 100 V, Frequency Resonse- 50-20,000Hz, complete in all respect with all accessories connectors , pins and sockets and connecting cable.Make -AHUJA , JBL, YAMAHA andother equivalent make matching with above specifications. |
| 3 | Supply , installation, testing and commissioning of 2-way 90 watt Compact PA Wall Speakerfor wireless conference systemwhich have following specification . (1)High fidelity 2 way PA wall speaker comprises of a Water resistant PP coated cone woofer , a titanium dome tweeter and 2 way crossover network. (2) Power Rating- 90W RMS/135 W max., Power Taps- 90W,90/60/30/15 W, Impedance / voltage - 8 ohm/ 100 V, Frequency Resonse- 55-20000Hz, Dimensions- W270*H378*D200 mm.complete in all respect with all accessories connectors , pins and sockets and connecting cable.Make -AHUJA , JBL, YAMAHA andother equivalent make matching with above specifications. |
| 4 | Supply , installation, testing and commissioning ofPA PowerAmplifier 600 Wattsfor wireless conference system which have following specification .(1) 1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.(2) 100 V input is provided for connecting another amplifier\"s output. (3) Resettable circuit breaker for protection against overload and short circuit .(4) 19\" rack mountable chassis(5) Power Output: 750W Max., 600W RMS at 10% THD, 550W RMS at 5% THD, 500W RMS at 2% THD, 480W RMS at 1% THD(6) Output Regulation- = 2 dB, no load to full load at 1kHz(7)Input Channels - 1 × 200mV/470k? (unbal.), 2 × 1V/50k? (bal.), 1 × 100V Input/50k? (8)Frequency Response - 50-15,000Hz ±3dB(9)Tone Controls - Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz (10) Speaker Outputs- 4?, 8?, 70V & 100V (11) Power Supply- AC: 220-240V 50/60Hz DC: 24Vcomplete in all respect with all accessories connectors , pins and sockets and connecting cable.Make -AHUJA , JBL, YAMAHA andother equivalent make matching with above specifications. |
| 5 | SITC of 120watt Amplifier having following Specification 19\" Professional PA Amplifier; 5 Microphones, 2 Aux and 1 USB Input; Built-in MP3 USB Player with Recording and Remote Bass-mid-treble control. Mid control specifically for boosting vocals; FM antenna at the back for better reception; Reliable and sturdy flue terminal connector Immediately transfer to DC power (12V car battery) when AC power fails; Preamplifier and line output for connecting to booster amplifier and recording program Line input for connecting output from any external live mixer or connecting Rock-ur in series as a booster power amplifier.complete in all respect. Make Ahuja,NX Audio ,Bose, and other equivalent make. |
| 6 | Supply & Installation of IP-20 & IK-08 , UL ListedWall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with \"U\"Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19\" angles with wall mounting provision on wall. Accessories like: 1 No of 19\" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19\" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastneretc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 7 | 6 U Rack with Width 600 mm &Depth 400 mm + 100 mm |
| 8 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 9 | Supplyand fixingof3 RCAAudio Video Cableto transmit Audio and video from one device toHDTV,LED Tv . Connectors: 3 RCA jacks - 3 RCA jacks , Fully screened/shielded Cable , Connects portable audio video devices with the common RCA composite video stereo audio port to a TV, AV receiver, amplifier, projector, radio, car audio, Hi Fi stereo audio system, home theater system, computer sound, recording equipment, speaker etc makepluto, upix , kebilshop .andother equivalent make matching with above specifications 3 RCACable 15 MTR Length |
| 10 | Supplyand fixingof Audio Cable with connectors 3.5 mm stereo jack male to female Copper cable For high performance audio Extension transmission.make upix , kebilshopandother equivalent make matching with above specifications. Audio Cable with connectors 20 Mtr. length |
| 11 | Providing & Fixing of modular type lockable feature socket dulymade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 12 | 6/16 Ashuttered socket |
| 13 | Providing & Fixing ofISI marked (IS:1293) 16 ampunbreakable 3 pin plug top having lamp indicator with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal including making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 14 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 15 | 25 mm |
| 16 | Providing & Fixing offollowing size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 17 | 8 Module |
| 18 | 12 Module |
| 19 | Providing & Fixing of Wiring Accessories OEM fabricated following size virgin materialUPVCmodular boxes on surface suitable for modular accessories as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 20 | 6-8 Module |
| 21 | 10-12 Module |
| 22 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 23 | 1 x 1.5 sq.mm |
| 24 | 1 x 2.5 sq.mm |
| 25 | P&F weather proof metering cum control panel with 40cum. X60Cm. X80Cm. Height 2mm. thick M.S. sheet made out of angle iron 38X38X6mm. and 38X4 .5mm. M.S. Flat respectively for support of sheet as approved design with operable door on both side made out of frame of angle iron 25X25X3mm. with steel handle and panel lock duly pointed with primer red oxide paint and two coats of gray paint of approved make quality. And with providing 6mm. thick Bakelite sheet of size 80X60mm. Fixing of legs in pedestal 30 Cm. Deep and grouting with cement concrete 1:3:6 including excavation. Panel doors should be duly soaked with rubber gasket & 2 No. cable brass glands single comparison type should be provide on bottom side with remove able gland plate. A glass/ Wire mesh of required should also be provided on the door to take Reading (As per drawing enclosed). |
| 26 | Pipe Earthingas per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. \" B \" class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height250 to 300 mm. and embodying the pipecomplete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 27 | Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection with GI/Cu purity purity >95%thimble etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 28 | 10 SWG G.I. ( Hot Dipped) Wire |
| 29 | Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonatewith brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,minimum width ofswitch toggle( PUSH PART ) should not less then 20mm,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 30 | 10 A one way switch |
| 31 | 16 A one way switch With LedIndicator |
| 32 | Supply , installation, testing and commissioning of Dual PA UHF Wireless Microphone( Transmitter and Receiver) for wireless conference systemwhich have following specification . (1)Sturdy table-top dual channel receiver with frequency display. (2)Separate volume control for both channels on the front pannel of the receiver . (3) Two handheld dynamic transmitters ,each operating on 2*1.5V AA pencil cells.(4)Separate balanced audio output from each channel through XLR connector and an unbalanced mixed output through 6.3 mm jack socket available from the receiver. (5) Receiver operates on 12V DC through an AC adaptor supplied along with the transmitter. (6) TRANSMITTER:- RF OUTPUT POWER -10 mW(max.) , MICROPHONE ELEMENT - DYNAMIC,CARDIOID, FREQUENCY RESPONSE- 50-15000 Hz, L-250 mm(7) RECEIVER :-AUDIO OUTPUT- Bal. 0DbU, Unbal. 10 dBu, S/N RATIO- 100dB, FREQUENCY RESPONSE - 50-15000 Hz , complete in all respect with all accessories connectors , pins and sockets and connecting cable.Make -AHUJA , JBL, YAMAHA andother equivalent make matching with above specifications. |
| 33 | Providing & Fixing ofIK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles,of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R numberhaving efficiency more than 85 % and in compliance to BIS certified and Trade markcertificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10%, driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K±355K.Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 34 | High Power LED Flood Light Minimum lumen output 18650 lm/150 watt |
| 35 | Providing & Fixing of IK08IP65 protected Top/Bottom mounted LED Post top Luminarie made of single piece constructionpowder coated die cast alluminium housing with UV stabalized Clear / frosted Polycarbonate diffuser andAluminium anodised with sand blast reflector. The System level Luminous efficacy =100 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N)and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained . Driver current <750mA.Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 36 | Minimum lumen output 2500 lm/25 watt Post top Luminarie |
| 37 | Providing and fixing of IP 65 protected Polycarbonate / Polysterene fuse box moulded with inside knock outs of following size with hinged cover, transparent window,PU gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0sq.mm heavy duty connector, earth terminal,complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 38 | 125 mm X 200 mm X 122 mm |
| 39 | Supply and installation of spike of M.S. rod 20mm dia 3.0mtr. long for earthing of (tower/pole) drive into earth by mechanical means sturcture connection the spike with cross arm top hamper PCC pole, lattics tower to earth etc. completeas per technical specification of DISCOM. |
| 40 | Providing & Fixing of 240/415 V isolatorISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage,true contact indication,Red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting,minimum phase termination capacity of 35sq.mm.IP 20 contact protection and fitted in existing distribution board / sheetincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 41 | Four pole Isolator |
| 42 | 63 A rating |
| 43 | Supply & Laying following size\" B \" class ,G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with accessories like bend, socket etc.for laying earth conductor/ strip / cable in ground/ surface/ recess as required.All as per pre approved by Engineer in charge.(Earth Excavation will be Paid Extra)All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annex ure \"A\" attached with this BSR . |
| 44 | 65 mm dia. |
| 45 | 80 mm dia. |
AI Tender Summary
Tender Timeline
Jan 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender