Military Engineer Services-MES has published Tender For Repairs And Maintenance Of Summer Cooling Appliances And Split/Window Type Acs And Other Misc Works At Mil Stn Dhana.. Submission Date for this Tender is 23-02-2023. Air Conditioner Tenders in dhana Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 11-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-02-2023 |
2 | 18-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-02-2023 |
Sl. No. | Item Description |
1 | M & L for Repair / maintenance / Servicing of Refrigeration and cooling appliances atAGE (I) Dhanaincluding taking down cooling appliances, transporting to workshop for repair and transporting back, fixing to its original location complete with making electrical connection with entire satisfaction of Engineer-in-Charge. |
2 | Note:- (a) The exclusive parts if required viz over load protector, condenser, motor, cooling coil, compressor body condenser and cooling coil, fan blade, fan blower, air filter, gas charging, thermostat switch, running capacitor, relay cap, starting capacitor, and electrical goods all will be the measured and paid separately under relevant items of schedule as supply only. (b) No additional labour payment shall be entertained for replacement of any exclusive parts of appliances. (c) The rate quoted by the tender also includes labour cost for filling refrigerant gas in unit. |
3 | SUPPLY ONLY FOLLOWING PARTS/ITEMS FOR SPLIT AC 1.5 TR/2 TR |
4 | Supply only compressor suitable for existing split type AC 1.5/ 2 TR. |
5 | Supply only condenser suitable for existing Split type AC 1.5/2 TR. |
6 | Rewinding only to blower motor for 1.5/2TR split AC. |
7 | Supply only Starting capacitor suitable for existing split AC of cap 1.5 / 2 TR. |
8 | Supply only Running capacitor suitable for existing split AC of cap 1.5/2.0 TR. |
9 | Supply only Starting relay suitable for existingsplit AC of cap 1.5/2.0TR. |
10 | Supply only Condenser fan blade suitable for split AC 1.5 TR/2 TR |
11 | Supply only Fan blade (evaporator) suitable for split AC of cap 1.5 / 2 TR. |
12 | Supply only Circuit plate with PCB suitable for split AC of cap1.5 / 2 TR. |
13 | Supply only PVC air filter suitable for existing split AC of cap 1.5 / 2 TR. |
14 | Supply only Remote controller suitable for existing split AC of cap 1.5 / 2TR. |
15 | Supply only Blower motor suitable for existing split AC of cap 1.5 /2TR. |
16 | Supply only Swing motor suitable for existing split AC of cap 1.5/ 2 TR. |
17 | Supply only Condenser motor suitable for existing split AC of cap 1.5 / 2 TR. |
18 | Supply only Contactor relay suitable for existing split AC of cap 1.5 / 2 TR. |
19 | Supply only drain pipe PVC, suitable for split AC of cap 1.5 /2 TR. |
20 | Supply only bracket suitable for existing split AC of cap 1.5/2 TR. |
21 | Supply only brass valve1/4" suitable for existing split AC of cap 1.5/2 TR. |
22 | Supply only brass valve1/2" suitable for existing split AC of cap 1.5/2 TR. |
23 | Supply only brass valve 5/8" suitable for existing split AC of cap 1.5/2 TR. |
24 | Supply only Copper tube of size 1/4". |
25 | Supply only Copper tube of 3/8" |
26 | Supply only Copper tube of 1/2 " |
27 | Supply only Copper tube of 5/8 " |
28 | M&L for repair to body/base of water cooler 40/80 ltr cap, by replacing the rusted portion with PGI sheet to match with existing body with and including preparation of surface to smooth finish and duly painted complete with two coats of synthetic enamel paint all as directed. |
29 | All as per item No 28.00 here in before but cap 60/120 ltr water cooler. |
30 | All as per item No 28.00 here in before but cap 170 ltr refrigerator. |
31 | All as per item No 28.00 here in before but cap 300to 310 ltr refrigerator. |
32 | SUPPLY ONLY FOLLOWING PARTS/ITEMS FOR REFRIGERATOR /WATER COOLER / DEEP FREEZER |
33 | Supply only Starting relay suitable for existing refrigerators/water cooler. |
34 | Supply only Starting relay suitable for existing deep freezer of cap 200 ltr cap. |
35 | Supply only Over load protection suitable for existing refrigerator/water cooler.of cap upto 310 ltr cap. |
36 | Supply only Fan motor suitable for existing water cooler upto 120 ltr cap. |
37 | Supply only Fan motor suitable for existing deep freezer 200 ltr cap. |
38 | Supply only Stainless steel chromium plate push cock of 15 mm dia. |
39 | Supply only lamp holder and base including lamp complete for refrigerator. |
40 | Supply only Thermostat switch for water cooler 40/80 to 150 ltr cap. |
41 | Supply only Fan motor suitable for refrigerator upto 310 ltrs cap. |
42 | Supply only Timer suitable for refrigerator upto 310 ltr cap. |
43 | Supply only Condenser suitable for existing water cooler upto 120 ltr capacity. |
44 | Supply only Compressor suitable for existing water cooler upto 120 ltr capacity. |
45 | Supply only Compressor suitable for existing refrigerator upto 310 ltr capacity. |
46 | Supply only Compressor suitable for existing deep freezer of cap 200 ltr. |
47 | Supply only acrylic vegetable tray suitable for existing refrigerator of cap 165 to 310 ltr. |
48 | Supply only waste water tray suitable for single/double tap with waste hose suitable for water cooler. |
49 | Supply only PVC float valve with PVC ball suitable for 15mm dia complete for water cooler upto 120 ltr capacity. |
50 | Supply only ice tray plastic complete all as specified. |
51 | Supply only magnetic door gasket of any size complete all as specified. |
52 | Supply only freezer suitable upto 310 ltr cap refrigerator complete all as specified. |
53 | Supply only PVC vegetable tray suitable for refrigerator upto 310 ltrs capacity. |
54 | Supply only freezer door of any size any capacity complete all as specified. |
55 | Supply only condensor unit out door suitable for refrigerator upto 310 ltr capacity. |
56 | M&L for dismantling and shifting the existing split Acs of cap 1.5/2 ton to new location complete. Note:- Copper pipe will be measured and paid separately under relevant items. |
57 | M & L for gas charging to compressor installed to machine/plant of capacity as under with specified grade of refrigerant and other connected process required for gas charging and testing complete all as directed for Refrigerator 190 to 310 Ltr capacity. |
58 | All as per item No 57.00 here in before but for refrigerator ofcapacity 170 Ltr. |
59 | All as per item No 57.00 here in before but for water cooler ofany capacity |
60 | All as per item No 57.00 here in before but Air conditioner 1.5Ton window type. |
61 | All as per item No 57.00 here in before but Air conditioner 1.5/2.0Ton split type. |
62 | Taking out desert cooler of any size and capacity from existing site for repair and dismantling of all components from evaporative cooler (desert cooler) metal/Plastic body very care fully ieexhaust fan, motor, Tulu pump, PVC spare parts i.e distributor, PVC pipe, tee, bend, elbow, holding clamp and any number of nut, bolt, washer, grass pad etc, including preparation of exterior & interior portion on cooler to a smooth finish and applying one coats of bituminous paint and reassembling the same in existing position in cooler for smooth running complete all as directed. Note :- If any worm out items/parts noticed during the assembling the same shall be measured and paid separately under the relevant items of schedule. |
63 | SUPPLY ONLY FOLLOWING PARTS/ITEMS FOR DESERT COOLER |
64 | Supply only Fan blade for desert cooler |
65 | Supply only PVC connection set of three suitable for existing desert cooler. |
66 | Supply only Cable three core flexible twisted copper conductor of 1.5 sq mm . |
67 | Supply only khas pad set of three superior quality. |
68 | Supply only new cooling fan with motor 900 rpm single phase 230 Volt 14 inch ISI mark complete all as specified and directed. Make: - Crompton/ polar /Everest/ Shakti. |
69 | Supply only Water submersible pump 240 V, AC 50 HZ, 10 watt, 5 LPM, 2mtr head. Make:- Bajaj / Cool world or equivalent |
70 | Supply only ON-OFF switch 5 amps 240 v, for water pump. |
71 | Supply only Selector switch 5 amps 240V. |
72 | Supply only GI shutter or side grill as existing at site. |
73 | Supply only Mounting bracket or legs for fan motor with nut and bolts etc of desert cooler. |
74 | Supply only Capacitor 4 Mfd + 5% 440V MPP "SH" |
75 | Supply and install Desert cooler electric driven, single phase, 230 V, 50 Hz,having min wattage 200 watts, nominal air flow capacity of 5000 Cum / Hr with three stage speed variant ( MSbody ) includingpainting with two coats of Rust proof enameled paint over a coat of red oxide primerwith water pump suitable size of ISI Marked complete all as per specified and directed by the Engineer-in-Charge.Note :- Old U/S desert cooler to be deposited to MES yard. Make of Fan motor: Crompton / Khaitan / Bajaj. Make of water pump: Khaitan / Indo / Summer cool / Texmo. |
76 | M&L for fabrication of angle iron stand suitable for housing the desert cooler including painting with two coats synthetic enamel paint over a coat of red oxide primer completeall as specified and directed. |
77 | M&L for submain wiring with Two single core PVC insulated unsheathed cable with multi stranded copper conductor of size 4 Sq.mm as AC circuit wiring including suitable size of PVC Casing Caping including PVC insulated unsheathed copper conductor cable of size 4 Sq mm as an earth continuity conductor complete all as specified and as directed by Engr- In Charge. Note:- Two runs of cable and one run of earth wire shall be measured as one unit length. |
78 | Supply & fix DBOXX MCB Protected Socket AC Socket 16A MCB Combo with Sheet steel enclosure with Plug Top, 230 Volt, AC complete all as specified and directed by Engineer-in-Charge. |
79 | Supply & fix DBOXX MCB Protected Socket AC Socket 20A MCB Combo with Sheet steel enclosure with Plug Top, 230 Volt, AC complete all as specified and directed by Engineer-in-Charge. |
80 | S & F switch socket combination 5 pin 5 Amps multipurpose 5 Amps flush type complete all as specified and directed. |
81 | S&F switch socket combination 2 in 13 pin 5 Amps & 15 Ampflush type universal complete all as specified and directed. |
82 | S&F plug top (Male) 3 pin 5 Amps 230 volts complete all as specified and directed. |
83 | S&F plug top (Male) 3 pin 15 Amps 230 volts complete all as specified and directed. |
84 | Taking out carefully lower tipperwater tankwater pumps supportofdesert cooler by unscrewing including supply and fixing, fabricating, welding the lower tipperwater tank & water pump supportof PGI sheet 1.6 mm thick complete. |
85 | M & L for Removing the burnt out copper winding of desert coolers Fan motor of any make, model and capacity and rewinding with and including super enameled copper wire of approved quality of existing gauge & change PVC flexible cable with copper conductor of size 0.75 sqmm overhauling lubricating with fresh grease including assembling and testing for satisfactory operation complete all as specified and directed. |
86 | Material and labour for disconnecting electrical connections of 10 HP, 3 Phase, 415 Volts Induction motor by taking down the burnt out, winding from motor, cleaning and rewinding with super enameled copper wire of the same guage and number of turns as existing, including replacement of necessary minor items such as nuts, bolts, washers etc., checking the alignment, refixing back, connecting up the electric connection, testing complete all as specified and directed. |
87 | M & L in replacement of the two single / one twin core PVC insulated stranded aluminium conductor6 sqmm 1100 volts grade complete all as specified and directed. |
88 | M & L in replacement of the two single / one twin core PVC insulated stranded aluminium conductor10 sqmm 1100 volts grade complete all as specified and directed. |
89 | Painting of external metal surfaces with two coat of synthetic enameled paint of approved make and colour after preparing the surfaces for panel covers, cubical panel duct covers etc all as specified and as directed |
90 | Supply and layingGI tubing "medium grade" including GI fittings like sockets, elbows, bends, Tees, unions, short pieces etc. laid in trench including excavation complete all as specified and as directed of size:- (a) 25 mm bore dia |
91 | (b) 15 mm bore dia |
92 | S&F in repair gun metal gate/globe valve heavy duty (ISI marked) with iron wheel head screwed both ends for iron pipe for the following bore of pipe including testingcomplete all as specified & directed. Make:- Zoloto / Kartar / Kirloskar (a)15mm dia |
93 | (b)25mm dia |
94 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 26,960.00 /- ] |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail