Tender For Providing Installation Of Street Light And Allied Works At Sewa Sadan Lampur Delhi
Tender Value
16.38 Lakhs
Estimated cost
Bid Submission
01 Feb 2023
0 days left
EMD
32770
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Installation Of Street Light And Allied Works At Sewa Sadan Lampur Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as requireda) 2 X 25 sq. mm (22mm) |
| 2 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as requireda) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 3 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 4 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required. |
| 5 | Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20 mm) of specified size and shape including form work, plastering if required, curing etc. as required. (volume of pole/ pipe not to be deducted) |
| 6 | Supplying and fixing of 32 mm dia X 2.00 meter long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
| 7 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.a) Above 4.5 meter and upto 6.5 meter |
| 8 | Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as requireda) GI pipe 40 mm |
| 9 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. |
| 10 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required |
| 11 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 12 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required a) 100mm dia |
| 13 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :a) 100mm dia |
| 14 | Fabrication, supplying, installation, testing & commissioning of out door type totally enclosed weather proof feeder pillar not less than size 1000 mm (width) x 1500 mm (height) into 350 mm deep (NS) fully compartmentalised, fabricated from 2mm,thick CRCA sheet and with sloping canopy on the top of suitable size and as per IP-54 with suitable gasket to make it dust/vermin proof and should be fabricated from CPRI approved manufacturer with base framefabricated from 50mmx50mm x6mm thick MS angle iron with 4 legs of 100 cm. longsuitable for 415 Volt, 50HzACsupply with 3 mm thick CRCA sheet on bottomfor taking load of cable gland andnecessaryindividual gland plate for cable gland, hinged front open-able door with locking arrangementcomplete with 200 Amp. 4 strip Al. busbar includinggrouting the legs of feeder pillarinCC foundation coveringthree sides up to feeder pillar bottom height duly plastered i/cphosphatized & powder coated painting, connection inter connection, earthing thefeeder pillar at two separate points etc. as reqd. (manufacturers having ISO 9001 certification), with following accessories-125 Amp TPMCCB 16KA with spreader link (Ics=100% Icu) - 1 no. as incomer63 Amp TPMCCB16KA with spreader link (Ics=100% Icu) - 3 nos. as outgoing70 amp 3 Phase Contactor for street light - 1 no.Digitial Timer for street light - 1 no.LED indicating light - 1 set (for RYB)6 Amp SPMCB - 3 Nos.VAF + PF Meter, CI 0.5, Flush mounting 96 x 96 mm - 1 Set.etc. complete as required. |
| 15 | Providing, laying and fixing following dia G.I. pipe (Heavy Duty C- class)to be usedas pole (For street Light fittings) on the existing foundation.a) 65 mm dia 5 Mtr for 40 Poles |
| 16 | Supplying, installation, testing & commissioning of following LED street light fixturewith IP 66 & IK 07 protection pressure aluminium die cast housing capable of delivering following nominal system lumens output with a minimum 120 lumens /watt and a CRI greater than 70 . The luminaire shall have a life class of 50000 hours @L70 for a design ambient of 35 deg C. The inbuilt electronic driver shall operate at power factor > .95ofCCT 4000-5700K minimum internal surge protection of 4 KV with toughned glass /polycarbonated cover LM 79/80 certifaction to be provided by the manufacturer for LED luminaire /LED chip complete with all acessories i/c dismantling the existing fitting etc. complete with all accessories etc. directly on existing pole including making connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. complete as required at site.(a) Minimum 7200 Lumen |
| 17 | Provision for pole / wall mounted box (300X200x105) mm size made out of (SMC) sheet moulding compound dust & wheather proof with front openable hinged type cover with locking arrangement i/c providing and fixing of following accessories on existing pole / wall with suitable arrangement as required:a) 32 amp 5 way connector with bakelite baseb) 6 amp SP MCB \"C\" curve (10 KA )- 1 No.c) Earth stud - 2 setsd) 40 x 5 clamp with 2 nos 3/8\" Nuts & Bolts - 1 set as required.e) push and clip handle to close/open- 1no |
| 18 | Supplying and drawing following sizes of PVC insulated copper conductor multicore cable in the existing poles and bracket from cable termination connector to the fitting i/c providing suitable copper lugs connections etc. as reqd.a) 3 core 1.5 sq.mm |
| 19 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE aluminium Conductor armoured power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required..a) 2 x 25 sq. mm |
| 20 | Supply & Installation of three phase Monoblock pump set of 10 HP capacity suitable open well water supply system suction and delivery size 100 mm x 100 mm dia. suitable for working on 415 volts, 3Ph AC supply including fixing with existing pipes and valves, testing, commissioning etc as reqd at site |
| 21 | Supply of three phase Monobloc pump set of 10 HP capacity suitable open well water supply system suction and delivery size 100 mm x 100 mm dia. suitable for working on 415 volts, 3Ph AC supply in JE Store etc as reqd |
| 22 | Supplying installation testing and commissioning of Fully Automatic start delta starter with over load relay, contactors, voltage & current digital display with suitable capacity CTs, Auto/manual mode, LED indication, Single Phase preventor, voltage sequence corrector etc. complete as required suitable for 10 HP Monoblock submersiblepump as required at site. |
| 23 | Liftingof existing submersible bore well / open well 3 HP to 10 HP capacity Pump set from the bore well with chain pulley block & tripod stand i/c cartage charge at site from the work shop. |
| 24 | Lowering of 3 HP to 10 HP capacity bore well/open well pumpset in the bore well with chain pulley block and tripod stand i/c cartage charge pump set from work shop to site credit of old dismantle etc, as reqd. |
| 25 | Rewinding of following capacity 3 phase monobloc pump-set with suitable size water proof copper conductor wire i/c brazing metalling turning & polishing of shaft, replacement of GM bearing bush, thrust bush, thrust plate, necessary sleeves, pads etc. i/c buy back of dismantled material and making connection, testing and commissioning etc. complete as reqd.a) 10 HP |
| 26 | Providing, laying, testing & commissioning of \"C\" class Heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling/floor with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as requireda) 100 mm dia. |
| 27 | Supplying installation testing and commissioning of 3 core 6 sqmm copper conductor flat weather proof submersible pump cable between monoblock submersible pump and starter panel at site etc. complete as required at site. |
AI Tender Summary
Tender Timeline
Jan 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender