Housing Urban and Rular Development Government Departments Closing in 0 days TDR #35898065

Tender For Up-Gradation Of Manali To Burwa Road Km. 0/0 To 8/430

Issued by Government Departments · manali, Himachal Pradesh
Tender Value
6.50 Crore
Estimated cost
Bid Submission
02 Feb 2023
0 days left
EMD
13.02 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
manali → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Up-Gradation Of Manali To Burwa Road Km. 0/0 To 8/430 Sh-Construction Of Retaining Wall Breast Wall Metalling And Tarring Earthen Shoulder Sign Board Pcc V-Shape Drain Metal Beam Missing Cd And Parapets Under Pmgsy-Iii Batch-I 2022-23 Package No. Hp-06-256

BOQ

Name of Work:Upgradation ofManali to BurwaRoad Km 0/000 to 8.430 under PMGSY-III (Pakage No. : HP-06-256) for the year 20222-23
Sl. No. Item Description
1Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiselling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification clause 300 and section 1600 and as per direction of the Engineer- In – Charge including setting out, Construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavatedsuitable approved material to the original surface in layers not exceeding 150 mm (one hundred fifty milli metre) compacted thickness including shoring and strutting and pumping or bailingout water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewateringcomplete as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
2Providing and laying concrete Mechanically mixed and vibrated mix 1:6:12 (one cement : six sand: twelve graded crushed stone aggregate40mm(fortymillimeter) nominalsize) for plain /reinforced concrete in open foundations andplinths or similar works complete as per drawingsandtechnicalspecification clauses 802, 803, 1202 and 1203 including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work in retaining walls, breast walls etceteraas per the direction of Engineer-in-Charge including carriage of materials, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
3Providing and laying concrete Mechanically mixed and vibrated mix 1:5:10 (one cement : five sand: ten graded crushed stone aggregate40mm(fortymillimeter) nominalsize) for plain /reinforced concrete in open foundations andplinths or similar works complete as per drawingsandtechnicalspecificationclauses 802, 803, 1202 and 1203 including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work in retaining walls, breast walls etceteraas per the direction of Engineer-in-Charge including carriage of materials, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
4Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and MORD.Technical specifications clause 1206.3, and 1604.7 and as per direction of Engineer-in--Charge including carriage of materials within all leads, liftsand other incidental . The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
5Providing and laying100mm (One Hundred millimetre) dia PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V):20(H) (One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification clause 1206.6 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government excluding GST.
6Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications clause 1301 including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
7Loosening of the ground upto a level of 300 mm (three hundred millimetre) below the subgrade level, watered, graded with motor grader and compacted in layers with three wheel 80-100 (eighty to one hundred) KN static rollerto meet the requirementof subgrade construction as per MORD Technical Specification clause 303 as per direction of Engineer- in- charge including carriage of material within all leads lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
8Construction of granular sub-base by providing well graded materials as per table 400.1, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification clause 401 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
9Wet Mix Macadam: Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. including hauling of material in all leads, lifts as pertheentiresatisfaction and direction of Engineer-in-charge including carriage of materials within all leads, liftsand other incidental. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
10Prime Coat Preparing and applying of water soluble organo silane Nano technology (for bitumen emulsion application, IRC accredited) with cationic bitumen emulsion CSSI and water( <1000 ppm TDS) in the ratio of 1kg organo silane nanotechnology :100 kg cationic bitumen emulsion CSSI :200 litre water Mixing & Spraying : Take 1 kg of organo silane nanotechnology and add in 200 litre water while filling water in tanker/drum and then add 100 kg cationic bitumen under circulation. Mix the solution completely .Spray the solution @1 Kgper sqm on compacted stone base . Rate including all materials labour hire charges of machinery etc .complete as per MoRD specifications clause 502 & direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government excluding GST.
11Tack Coat Preparing and applying of water soluble organo silane nanotechnology (for bitumen emulsion application IRCaccredited with cationic bitumen CRSI and water(<1000 ppm TDS) in ratio of 1kg organo silane:100 kg cationic bitumen emulsion CRSI: 200 litre water .Mixing & Spraying : Take 1.4 kg of organo silane nanotechnology and add in 200 litre water while filling water in tanker/ drum and then add 100 kg cationic bitumen emulsion under circulation. Mix the solution completely .Spray the solution @ 0.3-0.4 kg per sqm on compacted stone base . Rate including all materials labour hire charges of machinery etc .complete as per MoRD specifications clouse 503 & direction of Engineer-in- Charge The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government excluding GST.
12Bituminous MacadamProviding and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table 500.4 premixed with bituminous binder, transported to site upto all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per Technical Specification Clause 504 including hauling of material in all leads, lifts as pertheentiresatisfaction and direction of Engineer-in-charge including carriage of materials within all leads, liftsand other incidental. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
13Providing and laying 30mm (thirty millimetres) compacted thickness bituminous concrete with minimum 100-120 (one hundred to one twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregates 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading, premixed with bituminous binder VG-10 (Viscosity grade- Ten) at the rate of 5.5 % (five point five) percent of mix weight or as per design mix with Nano technology (Zycotherm) at the rate 0.1% (Zero decimal one percent) weight of bitumen, using cement as filler with quantity not less than 2% (two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor paver finisher hydraulic with sensor control to the required grade, level and alignment, over a previsiouly prepared surface and rolling complete with smooth three wheel roller 8-10 (eight to ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (Zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eight) tonne smooth wheeled tandom roller to achive the desire compaction as per MORTH technical specification clause 507 complete in all respect or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.
14Construction ofun-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 (forty three) grade cement or any other type as per Clause 1501 M30 (M-thirty) Grade, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetre), mixed in a concrete mixer of not less than 0.2 (zero point two) cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and MORD Technical Specification section 1500 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi,royality, Malkana, toll tax or other taxes imposed by the Government but excluding GST.
15Construction of parapets with cement concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size)and curing complete including cost of form work as per HP.PWD specification including hauling of material as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, liftsand other incidental. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
16Providing concrete for plain/reinforced concrete in open, foundation complete as per drawings and technical specification clause 802, 803, 1202 & 1203. PCC Grade M20 Nominal mix 1:2:4 (Hand mixed)including the cost ofform work and curing complete includingcarriage of materials within all kinds of leads, lifts and other incidental andas per the entire satisfaction and directions of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
17Providing and errecting \" W\" metal beam crash barrier composing of 3 mm (three millimetre)thick corrugated sheet metal beam rail, 70 cm (seventy centimetre) above road/ Ground level fixed on I.S.M.C. series channel vertical post 150 x 75 x 5 mm (one hundred fifty into seventy five into five millimetre) spaced 2 m (two metre) centre to centre 1.8 m (one point eight metre) high, 1.1 m (one point one metre) below ground/ road level, all steel part and fitments to be galvanised by hot dip process, all fitting to conform to I.S 1367 and I.S. 1364 metal beam rail to be fixed on the vertical post with spacer of channel section 150x75x5mm (one hundred fifty into seventy five into five millimetre)and 330 mm (three hundred thirty millimetre) long complete as per MORTH technical specification clause 811 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
18Providing and laying mechanically mixed and vibrated plain cement concrete in substructure grade M-15 (M-fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic metre) on ground or under water including curing complete pumping or bailing out water de-watering removal of slush as required at site, which may arises at the time of laying concrete complete for all heights/depths including cost of form work in parapets and toe wall etcetra as per drawing and MORD technical specification section 800, 900 and 1200 including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi,royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.
19Steel work welded in built up sections, trusses and framed work including cutting, hoisting fixing in position and applying a priming coat of red lead paint in beams joists channels, angles, tee, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters including hauling of material as per specification clause 1002 andthe entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, liftsand other incidental. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
20Providing and laying mechanically mixed and vibrated concrete for plain cement concrete inopen foundation for all type of structurecomplete using plain cement concrete nominal mix 1: 3: 6 ( One cement : three sand : six graded crushed/broken stone aggregate 20mm(twenty millimetre) nominal size) on ground or under waterandcuring complete including pumpingor bailing out water, dewateringremoval of slush as required at site which may arrise at the time oflaying concrete completefor all heights/ depths includingthe cost of form workas per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi,royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST.
21Planting rooted rhizomes of large stature grasses on slopes, including supplying clumps of appropriate grasses, splitting into separate viable rhizome sections, trimming roots, preparing lines, digging planting hole to a max of 5 cm depth with metal rod or wooden peg depending on nature of soil planting rhizomes at the spacing specified, and subsequent watering (if necessary) On embankment slopes in plain areas and fill slopes <15°, plants at 10 cm spacings within the row; the first row is 0.75 m from the edge of the pavement and subsequent rows are spaced at 1 m intervals including hauling of material in all leads, lifts and other incidental as pertheentiresatisfaction and direction of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
22Planting rooted rhizomes of large stature grasses on slopes, including supplying clumps of appropriate grasses, splitting into separate viable rhizome sections, trimming roots, preparing lines, digging planting hole to a max of 5 cm depth with metal rod or wooden peg depending on nature of soil planting rhizomes at the spacing specified, and subsequent watering (if necessary). On fill slopes of 15 to 34° and cut slopes upto 45° plants at 10 cm spacing within the row; rows spaced at 0.5 m intervalsincluding hauling of material in all leads, lifts and other incidental as pertheentiresatisfaction and direction of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
23Providing and fixing of typical PMGSY informatory sign board with logo as per M.O.R.D. specification and drawing . Three MS plates of 1.6 mm (one point six millimetre) thick top and middle plate duly welded with MS flat iron 25mmx5mm ( twenty five millimetres into five millimetres) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm (Twenty five millimetre into twenty five milimetres into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to2 Nos. ( Two Nos.) 75mmx75mm (seventy five millimetre into seventy five millimetres) of 12 SWG (twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 (M fifteen) nominal mix 1:2½ : 5 (One cement: Two and half sand: Five graded or crushed stone aggregate 40mm(Forty milimetres)grade blocks of 450mmx450mmx600mm ( four hundred fifty millimetres into four hundred fifty millimetres into six hundred millimetres), 600mm ( six hundred millimetres) below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm (Forty seven millimetre into forty seven millimetres) of 12 SWG (Twelve standard wire gauge) steel plate tube. All MS will be stove enamelled on both sides. Lettering and printing arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections offramed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing andM.O.R.D. technical specifications section 1700 and as per direction of Engineer – in- Charge including carriage of materials within all leads, liftsand other incidental . The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
24Retro-Reflectorised Traffic Signs Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick Aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67 and the drawings andMORD technical specification section 1700complete as per direction of Engineer – in- Charge including carriage of materials within all leads, liftsand other incidental . The rate is includingoctroi,royality, Malkana, toll tax, orother taxes imposed by the Government but excluding GST.(24.1) 90 cm equilateral triangle [Warning Signs, Give Way]
2560 cm circular [Regulatory Signs]
2680 X 60cm rectangular. [Informatory]
2790cm high octagon. [STOP]
2850 cm X 60 cm rectangular [Chevron]
29Providing and Laying of hot applied thermoplastic compound road marking paint 2.5mm (two decimal five millimetre) thick with refletorising glass beads at the rate 250 gram (two hundred fifty) gram per square metre area, thickness of 2.5mm (two decimal five millimetre) is exclusive of surface applied glass beads as perIRC:35. The finished surfaceto be level, uniform and free fromstreaks and holes as per drawing and MORTH technicalspecification clause 803and with strips of 0.10 (Zero decimal one) metre width in centre lines or edge lines of the road as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
30Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high (eighty to one hundred centimetre) above ground level, painted black and white in 15 cm (fifteen centimetre) wide strips, fitted with 80 x 100 mm (eighty into one hundred millimetre) rectangular or 75 mm dia (seventy five millimetre diametre) circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC :79 and the drawings and MORTH technicalspecifications clause 806 andcomplete as per direction of Engineer – in- Charge including carriage of materials within all leads, liftsand other incidental . The rate is includingoctroi,royality, Malkana, toll tax, orother taxes imposed by the Government but excluding GST.
31Road Markers/Road Stud with Lens Reflector :- Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-In-Charge. The rate is includingoctroi,royality, Malkana, toll tax, orother taxes imposed by the Government but excluding GST.
32Reinforced cement concrete M-15 (M-fifteen) grade 5th (fifth) Kilometre stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification clause 1703 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
33Reinforced cement concrete M-15 (M-fifteen) grade Ordinary Kilometer Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification clause 1703 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
34Reinforced cement concrete M-15 (M-fifteen) grade 200m (two hundred metre) Stone (Precast) of standard design as per IRC :26 fixing in position including painting and printing etcetera as per drawing and MORD technical specification clause 1703 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
35Providing and laying mechanically mixed and vibrated plain cement concrete in open foundationall type of structure as per drawing and MORD technical specification open foundation for section 800, 900,1200 and 1600 for nominal mix 1: 4: 8 (one cement isto four sand isto eight graded crushed/brokenstone aggregate40mm (forty millimetre) nominal size ) and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths including the cost of form work in retaining walls, breast walls etceteraas per the direction of Engineer-in-Charge including carriage of materials, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
36Providing and laying flooring laid over cement concrete bedding complete as per drawing and MORDtechnical specification clause 1303. Stone Flooring in cement mortar 1:5, including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads, liftsand other incidental. The rate is including octroi, royality, Malkana, toll tax, or any other taxes imposed by the Government but excluding GST.
37Providing and laying (to level or slope) 900mm dia (Nine hundred millimetres) diameter reinforced cement concretepipesNP3 for culverts on first class bedding of Granular material in single row including providing and fixing collar with cement mortar 1 : 2 ( One cement : two sand)but excluding the cost of excavation, protection works, back filling, concrete bedding and masonry work in head walls and parapetsas perdrawing andM.O.R.D. technical specifications clause 1101 and as per direction of Engineer – in- Charge including carriage of materials within all leads, liftsand other incidental . The rate is includingoctroi,royality, Malkana, toll tax orother taxes imposed by the Government but excluding GST.
38Construction of R.C.C. railing of M-25 grade in cast -in-situ with 20 mm (twenty Millimetre) nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500 ( One in five hundred), centre - to -centre spacing between vertical posts not to exceed 2000 mm( Two thousand millimetre) as per drawing and technical specifications clause 1404.3 and as per direction of Engineer – in- Charge including carriage of materials within all leads, liftsand other incidental . The rate is includingoctroi,royality, Malkana, toll tax orother taxes imposed by the Government but excluding GST.
39Routine maintenance After completion of construction condition of bit document that is 4 (vi) Of contract data to general constitution of contact and technical specification of Ministry of rural development for rural roads August 2004 For rural roads including hauling/carriage of all labour equipment and material to various locations all mode of transportation in all leads and lifts to the entire satisfaction as per direction of the Engineer-in-Charge.
40For 1st Year
41For 2nd Year
42For 3rd Year
43For 4th Year
44For 5th Year

AI Tender Summary

OUR REF NO 35898065
AUTHORITY Government Departments
TENDER VALUE 6.50 Crore
LAST DATE 02-02-2023
Authority
Authority Name Public Works Department
Work Description Up-Gradation Of Manali To Burwa Road Km. 0/0 To 8/430 Sh-Construction Of Retaining Wall Breast Wall Metalling And Tarring Earthen Shoulder Sign Board Pcc V-Shape Drain Metal Beam Missing Cd And Parapets Under Pmgsy-Iii Batch-I 2022-23 Package No. Hp-06-256
Basic Detail
Tender No SEVI/G-V/PMGSY-22-10277-326dt 21-01-23
Bidding Type Tender
Location
City manali
State Himachal Pradesh
Key Dates
Publish Date 24 Jan 2023
Submission Date 02 Feb 2023
Open Date 03 Feb 2023
Finance
Tender Value 6.50 Crore
Tender Fee 5000
EMD 13.02 Lakhs
Exemption Not Available
Document List
e9df4e4b-934d-4803-83f5-5538b6829d89.html
BOQ_195922.xls
ManaliBurwaroadBidFinal.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 24, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Feb 02, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Feb 03, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

e9df4e4b-934d-4803-83f5-5538b6829d89.html

xls

BOQ_195922.xls

pdf

ManaliBurwaroadBidFinal.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender