|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | Group C |
| 3 | Providing and fixing 3 module plate with power plug with modular accessories ,1 No 16 amp switch & 1 No 16 amp socket L&T make Entice |
| 4 | Providing and fixing 3 module plate with light plug with modular accessories ,1 No 6 amp switch & 1 No 6 amp socket L&T make Entice |
| 5 | Providing and fixing 6 module plate with power & light plug with modular accessories ,1 No 6 amp switch & 1 No 6 amp socket ,1 No 16 amp switch & 1 No 16 amp socket L&T make Entice |
| 6 | Providing and fixing 8 module plate with power & light plug with modular accessories ,1 No 6 amp switch & 1 No 6 amp socket ,1 No 16 amp switch & 1 No 16 amp socket L&T make Entice |
| 7 | Providing and fixing 8 module plate with light plug with modular accessories ,2 No 6 amp switch & 3 No 6 amp socketL&T make Entice |
| 8 | Providing and fixingIO switch with plate and cat-6 connector with PVC box as required complete in all respect.. |
| 9 | Providing & fixing 4 U rack wall mounting of standard design as approved and directed as per satisfaction of Engineer-in-charge. |
| 10 | Providing and fixing 24 port patch panel D-link or its equivalent with making necessary connection and of standard design as per satisfaction of engineer-in-charge. |
| 11 | Providing & fixing 24 port managed switch of D-link or its equivalent make as per satisfaction of Engineer-in-charge. |
| 12 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 13 | 8 way , Double door |
| 14 | 12 way , Double door |
| 15 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 16 | Single pole |
| 17 | Double pole |
| 18 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 19 | 63 A |
| 20 | Wiring for circuit/ submain wiring alongwith earth wire with the followingsizesofFRLSPVCinsulatedcopperconductor,single corecableinsurface/recessedmediumclassPVCconduitas required. |
| 21 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 22 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 23 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 24 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 25 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. |
| 26 | 1 run of cable |
| 27 | 2 run of cable |
| 28 | 3 run of cable |
| 29 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 30 | Providing and fixing patch cord of 1 mtr lengths each with RJ45 connectors at both ends complete of Digiling /D-link make as per satisfaction of Engineer-in-charge. |
| 31 | Providing and fixing patch cord of 2 mtr lengths each with RJ45 connectors at both ends complete of Digiling /D-link make as per satisfaction of Engineer-in-charge. |
| 32 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 33 | Providing and installation of following type of recess mounting circular/Square type LED Downlight with white powder coated extruded aluminium die-cast housing equiped with specially designed cast aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making suitable cut-out in the existing ceiling, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.Light Recess 18 watt. |
