Tender For Proposed Market At Katwa Bus Stand Infront Of Trafick Post Katwa Ward No 20 Under Municipal Development Fund
Tender Value
38.35 Lakhs
Estimated cost
Bid Submission
27 Jan 2023
0 days left
EMD
76715
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
katwa → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Market At Katwa Bus Stand Infront Of Trafick Post Katwa Ward No 20 Under Municipal Development Fund
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, and dressing and ramming the bottom, bailing out water as required complete.a) Depth 1.5 Mtr |
| 2 | (A) Filling in foundation trenches or plinth with silver sand in layer not exceeding 150 mm as directed and consolidating same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on measurement of finished quantity of work). |
| 3 | Single Brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 4 | Cement concrete with graded stone ballast (40 mm. size excluding shuttering) In ground floor(1:3:6) proportion Foundation & Floor. |
| 5 | Ordinary Cement Concrete M- 20 (mix 1:1.5:3) with graded stone chips (20 mm down) excluding shuttering and reinforcement. if any, in ground floor. as per IS 456- 2000. (Gr. Floor) |
| 6 | b) In 1st Floor |
| 7 | Reinforcenment for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite lenght, hooking and bending to correct shape, plicing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. JSN/JSPL/SHYAM/SRMB/BNASL (Gr. Floor) |
| 8 | b) In 1st Floor |
| 9 | Hire and labour charges for shuttering withcentering and necessary staging upto 4 musing approved stout props and thick hardwood planks of approved thickness withrequired bracing for concrete slabs, beamsand columns, lintels curved or straightincluding fitting, fixing and striking out aftercompletion of works (upto roof of groundfloor) (a) 25 mm to 30 mm thick wooden shutteringas per decision & direction of Engineer-In-Charge. |
| 10 | 1st Floor |
| 11 | Brick work with 1st class bricks in cementmortar (1:6) (a) In foundation and plinth |
| 12 | b) Super Structure Ground Floor |
| 13 | 125 mm thick brick work with 1st class bricks in cement morter (1: 4) Gr. Fl. |
| 14 | Plaster (to wall, floor, ceiling etc.) with sandand cement mortar including rounding off orchamfering corners as directed and rakingout joints including throating, nosing and dripcourse, scaffolding/staging where necessary(Ground floor).[Excluding cost of chippingover concrete surface] a)Out side wall(i) With 1:3 cement mortar 10 mm thick plaster [P-189,It-01(iii)(C)] |
| 15 | b) 20 mm thick plaster (1:4) InternalGround Floor [P-193,It-01(a)] |
| 16 | c) 15 mm thick plaster (1:4) InternalGround Floor [P-189,It-01(ii)(a)] |
| 17 | c) 15 mm thick plaster (1:4) ExternalGround Floor [P-189,It-01(ii)(b)] |
| 18 | Neat Cement punning about 1.5mm. Thick in wall, dado, window, sills, floor, drain etc.Ground Floor |
| 19 | Artificial stone in floor, dado, staircase etcwith cement concrete (1:2:4) with stonechips, laid in panels as directed with toppingmade with ordinary or white cement (asnecessary) and marble dust in proportion(1:2) including smooth finishing and roundingoff corners including raking out joints orroughening of concrete surface andapplication of cement slurry before flooringworks using cement @ 1.75 kg/sq.m allcomplete including all materials and labour.In ground floor.3 mm. thick topping (High polishing grindingon this item is not permitted with ordinarycement).Using grey cement 20 mm th (1:2:4) Ground Floor |
| 20 | Supplying fitting and fixing steel rolling shutter with 18 B.G .of approved type steel to the section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. |
| 21 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessaryholes, chasing etc. in walls, floors etc. and making good damages omplete.Ground Floor |
| 22 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] (b) With Chawk Dungri(i) Area of each tile exceeding 0.3 sq.m |
| 23 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)Ground Floor |
| 24 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterioremulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of theEIC. (a) One Coat |
| 25 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats |
| 26 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)a) Normal Acrylic Emulsion |
| 27 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sandpapering etc. |
| 28 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface : (iv) Two coats (with any shade except white) |
| 29 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/ M-Seal etc)complete.) UPVC Pipes:i) 75 mm Dia |
| 30 | (ii) 110 mm. Dia. |
| 31 | Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layercomplete. (Payment to be made on the basis ofmeasurement of finished quantity of work)(a) With earth obtained from excavation of foundation. |
| 32 | Sub Total |
| 33 | GST 12% |
| 34 | CESS 1% |
AI Tender Summary
Tender Timeline
Jan 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 30, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender