Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-02-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-02-2023 |
| 2 | 10-02-2023 | Corrigendum02 | BOQ | 18-02-2023 |
| 3 | 06-02-2023 | Corrigendum01 | Date | 18-02-2023 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster from brick or stone wall etc including rakingoutjoint, hacking for key scrubing down with water etc complete all as specified and directed. |
| 2 | M&L for 15mm thick rendering plaster in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed. |
| 3 | M&L for 15 mm thick rendering plaster in CM 1:4 on brick work or concrete surfaces finished even and sommoth without using extra cement complete all as specified and directed. |
| 4 | M&L for 10 mm thick cement plaster in CM 1:3 in roof slab / soffits of slabs/Chajja/ sunshade finishing the plastered surface even & smooth without using extra cement etc complete all as specified and directed. |
| 5 | M&L for preparation of newly plasterd surface of wall and applying two coats of cement base paint of approved shade/tint over one coat of base coat primer etc complete all as specified and directed. |
| 6 | M&L preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty in two layers (each layer minimum 1mm thick) complete all as specified and directed. |
| 7 | M&l for applying two coats of distemper oil emulsion over a coat of putty primer on wall incl preparation of surfaces etc complete all as specified and directed. |
| 8 | Demolition of brick work built in cement mortar of any description complete all as specified and directed. |
| 9 | M&L for brick masonry with sub class old size `B` brickstraight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 10 | All as per item Ser No 9.00 above but except bricks |
| 11 | M&L for brick work with sub class `B` brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 12 | M&L forrough cast plaster including 15mm thick rendering in CM 1:3 onbrick work or concrete surfaces complete as specified in SSR Part -I clause 14.22 complete all as specified and directed. |
| 13 | M&L for preparation of newly plastered surface of walls and applying for two coats of acrylic exterior emulsion (weather coat proof Apex ultima or equivalent of any tint including priming with alkali resistant primary paint ) on external cement plastered surfaces ofwallcomplete all as specified and directed. |
| 14 | M&L for preparation of old plastered surface of wall and applying two coats of cement base paint over one coat of base coat primer complete all as specified and directed. |
| 15 | M&L for preparation of old plastered surface of walls and applying two coats of oil emulsion distemper over 2mm thick wall care putty in two layers (each coat minimum 1mm thick) complete all as specified and directed. |
| 16 | M&Lfor Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. (Payment for providing grooves shall be measured and paid separately). Note:-1.Rate also includes necessary iron scaffolding to carry outstone grit plaster work upto a height G+6 floor. |
| 17 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. |
| 18 | M&Lfor complete removal of exisiting tratement, cleaing the surface with emery paper 180 andapplying one coat of primer and subquently with putty for making the surface soomth for receving two coat of base paint (tint)incldung two coat textured wall painting with premium acrylic (textured) emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grms/ltrs of approved brandwith two protective coat and as per manufacture instruction complete all as specified and directed.Note:- Colour shade of texture painting to be done as per approved by GE. |
| 19 | Demolition ofcement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 20 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 21 | M&Lfor pre-polishedcoloured chequered cement concrete tiles 30cm X 30cm X 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 22 | M&L for 10mm thick anti skid pavement tiles (heavy duty) of area not exceeding 0.18 Sqm each & antiskid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match the shade of tiles laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 23 | M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping including water through and the like weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 24 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate)complete of broom finish as in floor/ path/sub base complete all as specified and directed. |
| 25 | M&LPCC 1:3:6 type C-2 (40 mm graded stone aggregate) as in plinth protection/path 75 mm thick laid in bays including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen VG-10and 1:2 mix by volume. |
| 26 | S&Ffactory made cement concrete kerb stone, finished surface of size 20cmx30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfacesof sides and 20mm for the rest of surfaces jointedin CM 1:6 and struck flush etc including demolition of old broken kerb stone and removing of same out side MoD land in low laying area complete all as specified and directed. |
| 27 | M&L for preparation of newly plastered concrete surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 28 | M&L in repair 80mm thick precast cement concrete coloured designerinter locking tiles/ paver block with grey cement and no pigment any shape & size confirming to IS-15658 -2006 M-40 grade including 40mm thick sand cushioning layer complete all as specified and directed. |
| 29 | M&L in repair precast cement concrete coloured designer interlocking paver block any shape and size confirming to IS-15658 - 2006 of 60mm thickness M-35 grade with grey cement and pigment laid over 40 mm thick sand cushioning complete all as specified and directed. |
| 30 | Dismantling structural steel work including doors, gates, angle post but excluding framed truss etc complete all as specified and directed. |
| 31 | S&F MS framed work as in doors or gate of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other coveringdoor etc to be prepared for hanging or sliding with and including either hooks and pintle hinges or steel hanging door fitting and hanging also fastening and fixing complete all as specified and directed. |
| 32 | S&F MS plain black sheet in steel gates etc cut to size holes punched, including screw clout nails riveted & welding etc (thickness of sheet 1.60mm) complete all as specified and directed. |
| 33 | S&F framed work such door, grill railing, cattle trap on open drains using mild steel angle iron,framed guard bars barred iron doors ladders framed balusters walk ways railings framework for water tanks including jali and similar work, MS flats of sizes as directed with and including provision of MS hinges and MS Hold fast fixed complete all as specified and directed. |
| 34 | S&F steel work in tubular trusses for pillar/post/rafter/purlin with frame work or frame work forACPboardwith special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 35 | M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 36 | S&F in repair 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 37 | S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed. |
| 38 | S&F in repair 2mm thick polycarbonate Fibre glass reinforced translucent corrugated sheeting with threelayer and side lap fixed with coach screw and washer in roof, wall including fixing on G+5 top roof etc complete all as specified and directed. |
| 39 | S&F Rolling shutters 1.25mm thick laths , without ball bearing, as specified including top cover, an anchoring rod, haps and staple and one shop coat of primer, erected in position as indicated, push pull or manual type including taking down old unserviceable rolling shutter complete all as specified and directed. |
| 40 | S&F in repair Safety lever lockss mild steel with 4 levers for rolling sutter complete all as specified and directed. |
| 41 | S&F in repair ball bearing for rolling shutter complete all as specified and directed. |
| 42 | S&F in repair Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets etc complete all as specified and directed. |
| 43 | Demolition of reinforced cement concrete as in drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 44 | S&F Factory made precast heavy duty drain/manhole covers with MS frame and reinforcement (size Square/rectangular/circular with ring) complete all as specified and directed. |
| 45 | S&Fin repair Stainless steel ( Grade 304) hollow tube minimum thickness 16 guage (Round or square/rectangularpipe) of any dia /size fixed as in posts / railing with knock-down fixing system & top Mounted Round Baluster made of 38 to 50mm dia,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 46 | Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10Sqm on plan and not exceeding 1.5 m in depth and getting out etc complete all as specified and directed. |
| 47 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soilcomplete all as specified and directed. |
| 48 | Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting pointcomplete all as specified and directed. |
| 49 | M&L aluminium alloy powder coated (50 micron ) anodized frame of section 65 mm x44 mm x2 mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing, partly glazed with 5 mmthick tinted glass and partly with 12 mm thick prelaminated particle board including taking/dismantling old partion wall complete all as specified and directed.Note : Glass and prelaminated particle board shall be measured and paid separately. |
| 50 | S&Fin repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed. |
| 51 | S&Fin repair aluminium alloy door closer hydraulically regulated, desination No 2 universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed to door frame complete all as specified and directed. |
| 52 | S&F in repair aluminium anodised grill 6.0 x 4.5mm thick section 10cm centre to centre spacing complete with U channel all round fixed in window with screws complete all as specified and directed. |
| 53 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar etc complete all as specified and directed. |
| 54 | M&Lfor 18 to 20mm thick granite stone slab as in floor or shelves, over cooking platform,machine cut bedded and jointed with grey cementslurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing and bevelling half round edges of stoneslaid over 15 mm thick sereed bed in CM 1:6 complete all as specified and directed. |
| 55 | M&L for 18 to 20mm thick granite stone slab on vertical surfaces such as skirting/dado etc set and jointed with grey cementslurry and pointed with white cement with admixtur of pigment to match the shade of granite stone and beveling half round edges of stones fixed over 10mm thick rendering in CM 1:3 etc complete all as specified and directed. |
| 56 | M&Lfor Machine cut kota stone slab flooring 18-20 mm thick set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 57 | M&Lfor Machine Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 58 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish of the premises complete all as specified and directed. |
| 59 | M&L for Matt/Stone finish ceramic coloured tiles 450 x 300 x 7 mm thick in dado/skirting on wall etc, set and jointed in neat cement slurry and pointed in white or coloured cementto match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 60 | S&F in repair 12 mm thicktoughened frosted glass partly fixed and partly openable door, comprising of height 2100 mm and width 1000 to 1200 mm (as required at site)with pivot door of appropriate width including stainless steel chrome finish hardware fitting and all fittings and fixture as per manufacturer\"s instructions complete all as specified and directed. |
| 61 | S&F toughened frosted glass upto 12mm thick fixed on wall with clits on wooden/aluminium frame includingfixing acessoriesincluidng grouting emblem/crest on glass as directed complete all as specified and directed. |
| 62 | Dismantling wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board/slab/blankets any thickness including cover fillet/grids etc complete all as specified and directed.. |
| 63 | M&Lfor Gypsum board 12 mm thick for seamless POP false ceiling to flat surface fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centreincluding finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish complete as per manufacturer instruction complete all as specified and directed. |
| 64 | S&F for Gypsum Board 12 mm thick cornicesof upto 450 mm wide along the false ceiling on vertical surfacesfixed with cadmium plated screw, design as approved complete all as specified and directed. |
| 65 | M&L fordurable, coating, Corrosion Resistant, tamper proof, water proof seamless POP false ceilingincluding all accessoriesrequired for POP false ceiling as per manufacturer instructionincluding two coat ofapproved coloured painting over one coat of primer complete all as specified and directed. |
| 66 | M&L for POP false ceiling cornicesof as design approved by user along the POP false ceiling on vertical surfacesfixed with cadmium plated screw, design as approved complete all as specified and directed. |
| 67 | M&L for GI powder coated micro perforated micro metaliclook false ceiling with fleece lay in type minimum 0.5 mm thick, including provison of GI powder coated grid moudle of 600mm x 600mm size complete with GI powder coated grid consiting main runner suspended at 1200 mm centre to centre and cross runner Tsection suspended of 600mm centre to centrre suupported by 4mm GI rod from ceiling surfaceincluding steel fastner and GI powder coated wall complete all as specified and directed. |
| 68 | M&L for painting hinting lines on roads not exceeding 15cm wide with hot applied thermoplastic compound paint confirming to MORTH specification, painting as per manufacturers direction, mechanically applied to form 1.5mm thick film on road lined including removing, cleaning and drying the existing road painting on surface with dust, oil, grease and moisture free surface before applying the paint complete all as specified and directed. |
| 69 | S&F in repair fancy type stop valve/Angle valve with wall flangs, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore etc complete all as specified and directed. |
| 70 | S&F in repair 15mm bore brass chromium plated single lever basin mixture without pop up waste system with 450 mm long braided hoses etc complete all as specified and directed. |
| 71 | S&F in repair Bib tap fancy type, swan neck cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 15 mm bore etc complete all as specified and directed. |
| 72 | S&Fin repair 15mm bore brass cromium plated fancy type self closing pillar tap with capstan head screwed down high pressure with long screw shank & fly nuts etc complete all as specified and directed. |
| 73 | S&F in repair brass chromium plated fancy type towel rail 600 mm long complete all as specified and directed. |
| 74 | S&Fin repair PVC connection 45 cm long with brass check nuts on both sides suitable for 15 mm bore iron pipe etc complete all as specified and directed. |
| 75 | All as per item Ser No 74.00 above but 60cm long. |
| 76 | S&F in repair stainless steel 125mm dia Grating Square /Round of required s with or with out hole complete all as specified and directed. |
| 77 | S&Fin repair chromium plated soap dish fixed to wall with chromium plated brass screws etc complete all as specified and directed. |
| 78 | S&F in repair stainless steel (SS 304 grade) Satin finish automatic hand dryercomplete all as specified and directed. |
| 79 | S&F in repairlooking mirror 5.50 mm thick of superior quality, any size, with approved border design fixed with commercial plywood 6 mm thick or AC building board and with teak frame fixed in repaircomplete all as specified and directed. |
| 80 | S&Fin repair Corner self 12\" made out of 5 to 7 mm thick superior quality glass with chromium plated brackets and stainless steel railing fixed etc complete all as specified and directed. |
| 81 | S&Fbrass chromium bottle trap(with internal partition) 32mm size with 300 mm & 190mm long wall connecting pipes & wall flange complete all as specified and directed. |
| 82 | S&Fin repair Push Button Soap Dispensers with ABS body of capacity 0.80 ltr complete all as specified and directed. |
| 83 | S&F in repair chromium plated health fauset, telephonic type,with CP flexible arms and Jet, suitable for 15mm bore CP angle valves, etc complete all as specified and directed. |
| 84 | S&F in repair toilet paper holder Chromium Plated complete all as specified and directed. |
| 85 | S&F in repairs PVC waste pipe for WHB/Urinal/Sink of any flexible length with union etc complete all as specified and directed. |
| 86 | S&F 500 litres 3-layer heavy duty blow moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve including dismantling old unserviceable Water tank complete all as specified and directed. |
| 87 | S&F 1000 litres 3-layer heavy duty blow moulded polyethylene water storage tank, (cylindrical vertical with closed top) hosted and fixed in position including 20 mm dia PVC float valve including dismantling old unserviceable Water tank complete all as specified and directed. |
| 88 | Taking up or down 15 mm bore steel tubing & connection including cleaning for refixing serviceable tubing etc complete all as specified and directed. |
| 89 | All as per item Ser No 88.00 above but 20mm bore. |
| 90 | S&F steel water tubing 15 mm bore, medium grade, galvanised with all fittings and fixedto walls and ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and directed. |
| 91 | All as per item Ser No 90.00 above but 20mm bore. |
| 92 | S&F 32 mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.Note:- Cutting chases for concealing the pipes & fittings etc wherever required andmaking good, disturbed surface in Cement mortar 1:3 complete shall be included in the quoted rate. |
| 93 | All as per item Ser No 92.00 above but 20 mm dia. |
| 94 | S&F in repair vitreous china wash down water closet pedstal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinging devices & EWC CP Jet chromium plated with 1.00 mtr long PVC connection pipe etc complete all as specified and directed. |
| 95 | S&F in repair WC Orissa pattern size 580 x 440 mm of vitreous china (white) fixed with all including accessories including integral footrest etc complete all as specified and directed. |
| 96 | S&F in repair PVC low level flushing cistern 10 litres capacity white colour, sleek having weight not less than 1.80 Kg including PVC bend, supporting brackets and accessories as in repair etc complete all as specified and directed.e. |
| 97 | S&F in repair vitreous china urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal Spreader fixed to water supply pipe etc complete all as specified and directed. |
| 98 | S&F in repair 10.00mm thick thick glass urinal partitionof size 310x700mm/450x900mm etc complete all as specified and directed. |
| 99 | M&L for 1st quality non-skid coloured ceramic tiles 7 to 8 mm thick, in light shade, (Square/rectangular) joint less / joint free, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match the shade of coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed |
| 100 | M&Lfor 1st quality fully vitrified tiles 8 to 9 mm thick, in lightshade, double charge (Square/rectangular) polished, area of each tilenot exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match the shade of coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed |
| 101 | M&L for 1st quality glazed ceramic designer coloured tiles of size 450x300x7-8 mmthick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing to in white or coloured cement to match the shade of tiles laid over 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 102 | M&Lfor 1st quality glazed ceramic designer coloured tiles of size 600x300x7-8 mmthick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing to in white or coloured cement to match the shade of tiles laid over 10mm thick rendenring in CM 1:4 complete all as specified and directed. |
| 103 | S&F powder coated Gl frame work for roof ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers rod of 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including9 to 10 mm thick gypsum ceiling tile/board of size 600 x 600mmdecorative type with silver foil coating on back side of ceiling board for insulation and accoustic purpose, fixed with staple with on snap grid and 4mm dia GI wire with nuts, bolts , adjustable arrangement & washers etc complete all as specified and directed. |
| 104 | Cutting openings, through brick walls built in cement mortar, for door, windows and other openings or enlarging existing openings, converting window into door openings, etc. including providing, fixing and removing shoring, cleaning stacking bricks, removing surplus serviceable bricks,hard core, etc. to store and rubbish off the premises not exc.50 mtr. complete all as specified and directed. |
| 105 | Taking down chowkhats or frames not exceeding 1.5 Sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts and making good the distrubed surface etc complete all as specified and directed. |
| 106 | Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm(without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts and making good the distrubed surface etc complete all as specified and directed. |
| 107 | Taking down shutters of any description exceeding 1 Sqm but not exceeding2.00 Sqm eachcomplete all as specified and directed. |
| 108 | S&F 2nd class hard wood plain, solid, straight, chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 109 | S&F 40 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side complete all as specified and directed. |
| 110 | M&L forMelamine polishing on wooden on new works surfaces of any description with two or more coatswidth or girth including cleaning and preparing the surface including a coat of wood filler etc complete all as specified and directed. |
| 111 | S&F 100 mm size cast brass with mild steel hinge pin bright polished and fixed, type B-11 fixed/ welded to frame complete all as specified and directed. |
| 112 | S&F 200 mm long, brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts etc complete all as specified and directed. |
| 113 | S&F 300mm long brass, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing boltsand sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 114 | S&F brass handles cast type 150mm size complete all as specified and directed. |
| 115 | S&F 150mm long Floor door stopper of brass body and anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 116 | S&F powder coated aluminium window shutters of aluminium section of size for all member size 47.50x44.40x1.60mm thick with chowkat made out of hollow aluminium section size 63.5x38.10x1.60mm thick suitable for aluminium shutter and aluminium guard bar each shutters having two Nos aluminium hinges 100mm long, 100mm size aluminium handle and two nos 150mm long aluminium tower bolt and glazing with 4.8 mm thick sheet glass ordinary quality in square exceeding 0.5 sqm each pane coloured and fixed with glazing clips/ pins rubber beading and aluminium beading etc complete all as specified and directed. |
| 117 | Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frameetc complete all as specified and directed. |
| 118 | S&F 5.00mm thick tinted glass with glazing clips rubber beading and aluminium beading for aluminium door /window area exceeding 0.5 Sqm complete all as specified and directed. |
| 119 | S&F 5.00mm thick reflector sole sheet glass with glazing clips rubber beading and aluminium beading for aluminium door /window area exceeding 0.5 Sqm complete all as specified and directed. |
| 120 | S&Fin repair12mm thick prelaminated particle board with glazingclips rubber beading /gasket and aluminium beading for aluminium door complete all as specified and directed. |
| 121 | S&F in repair brass mortice lock sixlevers with duplicate key for aluminium door, complete all as specified and directed. |
| 122 | S&Fwooden flooring of8mm thick size 1216x192mm with interlocking panels with plastic and silicate mixture as the core material and surface with woodenfoil on the top with thickness of 10mm width of 200mm and length of 2.74/3.05 (9\"x10\") meters, smallembossed surface with glossy finishes per manufacturer instruction including taking down old wooden flooring complete all as specified and directed. |
| 123 | S&F L/H/U profile and corner profile molding with fillet at top, bottom and corner to hold the wooden flooring and wall panelling with exactly the same shade as that of the flooring planks as per manufracturer instruction complete all as specified and directed. |
| 124 | S&F wall panelling of wooden WPC as per approved sample 8mm thick size 1216x192mm with interlocking pannels with plastic and silicate mixture as the core material and surface with PVC foil on the top with thickness of 10mm width of 200mm and lengt of 2.74/3.05 (9\"x10\") meters, small embossed surface with flossy finish including taking down old wooden flooring complete all as specified and directed. |
| 125 | S&Fin repair 10 mm thicktoughened frosted glass door with side & topsglass fixedwith openable door, comprising of height 2100 mm and width 1000 to 1200 mm (as required at site)with pivot door of appropriate width includingstainless steel chrome finish hardware fitting, floor machine and all fittings as requiredincludingand fixture as per manufacturer\"s instructions complete all as specified and ditrected. |
| 126 | S&F in repair rolling vertical veniation blind consisting of aluminium head rail, of approved tint and traverse cordcomplete fixed in position complete all as specified and directed. |
| 127 | S&F in repair vertical venetian blinds consisting of aluminium head rail vanes/ louvers of 100 mm wide of approved tint and traverse cord fixed in position complete all as specified and directed. |
| 128 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with M.S. Square tube, suppling and fixing in opening as per specification & drawing etc complete all as specified and directed. |
| 129 | M&L factory made solid panel PVC wood grain printed door shutter 30mm thick (style)consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gathers with solvent cement supplying & fixing the frame at site.etc complete all as specified and directed. |
| 130 | S&F mild steel butt hinges 100 mm long medium weight etc complete all as specified and directed. |
| 131 | S&F aluminium anodised extruded fabricatedtype handle 150mm long etc complete all as specified and directed. |
| 132 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm longand fixing with bolts extruded sections etc complete all as specified and directed. |
| 133 | S&F200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed etc complete all as specified and directed. |
| 134 | Taking downofAluminium door/window shutter of any description areaof each shutternot exceeding 1.5 Sqmand refixing in same opening after carry out necessaryrepair including oiling, tightening the joints/bolts , fixed to floor spring/hinges, rubber beading, aluminum beading, handles, sliding bolts, hings, tower bolts etc complete all as specified and directed.Note :- (i) Floor spring to be paid under relevent Item of this schedule.(ii)Rate should including all T&P required for repair including fixing of rubber packings, screws etc complete to make good the shutter complete all as specified and directed. |
| 135 | All as per item Ser No 134.00 above but areaexceeding 1.5 sqm and not exceeding 4.00 Sqm each shutter. |
| 136 | S&F in repair double legged door stopper of aluminium alloy with rubber base, 150mm long complete all as specified and directed. |
| 137 | S&F for Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified, erected in position and securing runners with holdfasts and brackets including taking old collapsible door, complete all as specified and directed. |
| 138 | S&F powder coated anodised aluminium frame / shutter framefor door, window, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed. |
| 139 | S&F sound proofingtempered ordinary quality glass of 5.50 mm thickfixed on aluminium frame in double layered at on place with 5mm gap to absorb sound includingfixing all acessoriesetc complete all as specified and directed. |
| 140 | S&F in repair MSwire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, orgalvanised wire staples or including wooden beading & necessary welding to steel windows complete all as specified and directed. |
| 141 | S&F in repairsfor sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane includinghacking out old broken glass any thick ness complete all as specified and directed. |
| 142 | M&Lfor19/20mm thickprelaminated particle board interior gradeprelaminated on both sides with decorative choice lamination fixed with screws to timber framed work including dismantling of old unserviceable boarding any description complete all as specified and directed. |
| 143 | S&F continuous (Piano) hinges, mild steel bright finish or electro galvanised (widthof flap when open 30 mm) as in repair complete all as specified and directed. |
| 144 | S&F30 mm dia, cupboard knobs fancy type fixed with nutscrew and washer of mild steel, bright finished complete all as specified and directed. |
| 145 | M&L for draining out water, cleaning by removing silt/sludge, all scales, dust from RCC/AC/PVC water storage tank exceeding 500 litres and not exceeding 2000 litres capacity from mouth of circulating pipes and writing letters of height not less than 10 cm with white synthetic enamel paint such as date, month & year of cleaning including removing old waste/dust complete all as specified and directed. |
| 146 | M&L for taking out old bitumen joints of any type from roof surfaces and filling the same with new bitumen grade B including two coat of bitumen primer to exiting surface before filling the joints andafter filling the joints applying two coat of aluminum silver paint as per manufacture instruction etc complete all as specified and directed. |
| 147 | M&L forproviding and injecting chemical emulsion for post constructional antitermite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and directed. |
| 148 | M&L forantitermite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 Ltres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 149 | M&L for Anti-termite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, of side in skitting of existing floors using /Floor emulsion @ one litre per hole,300mm apart including drilling and pluging 12mm dia hloles with cement mortar 1:2(1cement:2 coarse sand) tyo match the existing floors complete all as specified and directed. |
| 150 | M&L for Anti-termite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, at point of contract of wood work by chemical emulsion(in oil and kerosene based solution) @ 0.5 litre per hole by drilling 6mm dia hloles at a downward angle of 45 degree at 150mm centre to centre and sealing the same. with cement mortar 1:2(1cement:2 coarse sand) to match the existing floors complete all as specified and directed. |
| 151 | M&L fortreating the soil along the external perimeter of building at the rate of 2.25 Ltrs of anti termite emulsion per meter of the perimeter wall complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
