Military Engineer Services-MES has published Special Repair And Addn/Altn To Bldg No- P/207 At Ashoka Stabal And Bldg No- P/321 At Saddlery Room At C Charge, Provn Of Two Toilet Blocks And Certain Minor Works At Rts And Depot Hempur Under Ge (E) Bareilly Spl Repair And Addn/Altn To Bldg No- P/207 At. Submission Date for this Tender is 25-02-2023. Toilet Bathroom Tenders in bareilly Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-02-2023 |
| 2 | 20-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-02-2023 |
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soi complete all as specified and directed. |
| 2 | M&L for excavation in trenches not exe 1.5 m width or depth and n exc 10 sq m on plan and n exc 1.5 m in depth getting out in any type of soil for foundation, laying Cables / Pipe etc., complete all as specified and directed. |
| 3 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, complete all as specified and directed. |
| 4 | M&L form work to sides of rough finished surfaces of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, veritical or to batter complete all as specified and directed. |
| 5 | M&L for RCC 1:2:4 (nominal mix), type B-1 (using 20mm graded stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified & directed. |
| 6 | M&L form work to sides of rough finished surfaces of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape complete all as specified and directed. |
| 7 | M&L for RCC 1:2:4 (nominal mix), type type B-1 (using 20mm graded stone aggregate) for columns, pillars, pierrs, posts & struts etc complete all as specified & directed. |
| 8 | M&L flat form work to sides and soffits of rough finished surfaces of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed. |
| 9 | M&L for RCC 1:2:4 (nominal mix), type type B-1 (using 20mm graded stone aggregate) for beams cantilevers bressumers, lintels over 1.5m span etc complete all as specified & directed. |
| 10 | M&L Form work to soffits of suspended rough finished surfaces of slabsuch as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc. complete all as specified & directed. |
| 11 | M&L for RCC 1:2:4 (nominal mix), type type B-1 (using 20mm graded stone aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc complete all as specified & directed. |
| 12 | M&F formwork to rough finished surfaces of contrete ofchullah hoods, chajjas, troughs and similar items including edges as specified and directed. |
| 13 | M&L for RCC 1:2:4 (nominal mix), type type B-1 (using 20mm graded stone aggregate) as in chajjas complete all as specified & directed. |
| 14 | M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified & directed. |
| 15 | M&L for brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 16 | M&L for 25mm thick DPC to horizontal or vertical surfaces including necessary form work PCC 1:2:4, type B-0 (12.5mm graded stone aggregate on plinth beam including mixing of water proofing compound as per manufacturers instructions and necessary form work all as specified and directed. Note:- Cost of WPC shall deemed to be included in Quoted rate of this item |
| 17 | Earth filling under floor spreading and leveling in layers n.exc 25cm thick including welll ramming including watering as required complete all as specified and directed. |
| 18 | M&L for Hard core of gauge n.exc 63mm of branch stone, and leveled in llayers n. exc 15 cm thick watered and rammed to true surface complete all as specified and directed. |
| 19 | M&L 100 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base, complete all as specified and directed. |
| 20 | M&L for 75 mm thickplain cement concrete 1:3:6,type C-2, with using 40mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler/filler boards 1:3 by weight complete all as specified and directed. |
| 21 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified. |
| 22 | Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 23 | M&L rendering 15mm thick on wall in cement mortar 1:6finished fair and even smooth without using extra cement as in internal surfaces complete all as specified |
| 24 | M&L rendering 15mm thick on fair faces of wall in cement mortar 1:4 finishedeven & fair on external wall mising with water proofing compound @ 3% by weight of cement or as per menufecture instruction as specified and as directed. Note:- Cost of WPC shall deemed to be included in Quoted rate of this item |
| 25 | M&L rendering 10 mm thick in CM 1:3 on ceiling surface, surface finsihed even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper (white or tinned) over chalk whiting primer over and including 3 mm thick wall care putty complete all as specified and directed. |
| 27 | M&L for three coats of white washing on newly prepared internal wall surfaces complete all as specified and directed. |
| 28 | M&L applying two coats cement base paint on wall including preparing new plastered surface including a white prime coat complete all as specified and directed. |
| 29 | M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 30 | M&L for sand filling under floor or in foundation including watering and consolidation all as specified and directed. |
| 31 | M&L cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in 75mm thick sub base complete all as specified and directed. |
| 32 | M&L for cement concrete 1:2:4, type B-0 (12.5 mm graded stone aggregate) 25mm thick as in bedding layer for laying floor tiles complete all as specified and directed. |
| 33 | M&L machine cut mirror polished kota stone slab flooring20-25mm thick over including 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment dto match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and directed. |
| 34 | M&L for machine cut mirror polished kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar laid over and including 15mm thick cement screed base in CM 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete as specified and directed. |
| 35 | S&F pressed steel frames size 125mm x 60mm for door with one or more rebates including necessary fixing lugs, hings, lock stike plate etc complete all as specified and directed. |
| 36 | M&L for PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) for fixing of hold fast / filling pressed steel door frame including necessary form work complete all as specified and directed. |
| 37 | S&F 35mm thick panneled shutters, solide core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 38 | S&F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats including complete all as specified and directed. |
| 39 | S&F 300mm mild steel ordinary rat rail, rod pattern springs including roller and roller plate (Helical door spring) complete all as specified and directed. |
| 40 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 41 | S&F 200mm long mild steel barel tower bolts of stove enamelled black with bright bolt and fixed as specified and as directed. |
| 42 | S&F 150 mm aluminium handle cast type, anodised complete all as specified and as directed. |
| 43 | S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded all as specified and directed. (Note :- Glassshall be measured and paid for separately). |
| 44 | S&F of Steel windows with pressed steel frame (size 95 x 45 x 1.25mm) side hung shutter including box type hinges with steel handle, and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar (open in side) dovetailed or welded complete all as specified and all shown on Drg No TD/088 dt 07 Jan 2002 Note:- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (ii) MS grill shall be measured and paid seperatly under relevant item of schedule. (Note :- Wire clothshall be measured and paid for separately) |
| 45 | M&L for PCC 1:2:4, type B-2 as in surface channel & drain including form work all as specified and as directed. |
| 46 | M&L for extra for forming fair finished drain or channel 30cm inner girth of cement concrete using extra cement including forms moulds, mitred/stopped ends etc all as specified and as directed. |
| 47 | M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed. |
| 48 | S&F TMT steel bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 49 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11Sqm, in floorsconforming to IS-13755,grade B-II (a)set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 20 mm thickscreed bed in CM 1:6 complete all as specified. Note : Engr-in-Charge will select sample from latest catalouge. |
| 50 | M&L for 7 to 9mm thick coloured glazed tiles of size exc 0.11 sqm but not exc 0.16 sqm fixed with neat cement slurry in vertical surface to wall confirming to relevant IS set and jointed in neet cement slurry and pointing in white/coloured cement to match over and including 10 mm thick rendering in CM 1:3 finished even and rough to receiving tiles on vertical surfaces all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 51 | S&F for steel ventilator with the top hung shutter incll hinges steel peg stay complete alll as specified and directed. |
| 52 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete alll as specified and directed. |
| 53 | S&F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete alll as specified and directed. |
| 54 | M&L 4.0mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane all as specified and as directed. |
| 55 | S&F mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed. |
| 56 | M&L for preparation of new wooden surface of any description and applying two coat of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete alll as specified and directed. |
| 57 | M&L for two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete alll as specified and directed. |
| 58 | S&F framed work such as grill grating etc with end of bars shouldered and/or riveted welded or forged into spikes framed guard bars iron doors ladders framed bullesters walk ways railings, frame work of water tanks and similar work confirming to Fe-410 complete alll as specified and directed. |
| 59 | M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4, mixed with liquid water proofing compound @ 3% by wt of cement as per manufacturers insts, finished the surface even and smooth without using extra cement. Note:- Cost of WPC shall deemed to be included in Quoted rate of this item |
| 60 | M&L for preparation of roof surface and applying a coat of hot bitumenous primer @ 0.40 Kg/sqm and applying a coat of industrial bitumen 85/25 grade @ 1.20 Kg/sqm, supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less than 3kg/sqm) 3mm thick consisting 100 micron HMHDPE film centre core including applying one coat of industrial bitumen grade 82/25 @ 1.20 Kg/Sqm on top surface of membrane and torch application of membrane with 100mm overlaps at side and end lap where required and finally finished with and including a coat of aluminium paint @ 0.20 ltr/sqm as per manufacture instruction complete all as specified and directed. |
| 61 | S&F fancy type curtain rod MS conduit rod PVC coated including fancy type knob and MS bracket for hanging curtain rod complete all as specified and directed. |
| 62 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawingcomplete all asdirected. |
| 63 | S&F 30 mm thick Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC "C" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 64 | S&F 125 mm long aluminium anodized, barrel tower bolts of extruded section all as specified and as directed. |
| 65 | S&F in repairs vitreous china water closet pan (Pedestal pattern), white with and including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device,(excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flush pipe, anti syphonage pipe, etc. complete all as specified & directed. Make : Parryware Model C0252 or equivalent |
| 66 | S&F 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets including 32mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed. |
| 67 | S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including all necessary fixing arragnement with wall complete all as specified and directed. |
| 68 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) including all fixing arrangement complete all as specified and directed. |
| 69 | S&F in Vitreous China counter top oval type colouredwash basin suitable size including pillar taps with bottle trap, including waste pipe fixing on counter with stainless steel brackets complete all as specified. Make Jaguar or equivalent |
| 70 | S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 71 | S&F in repairs CP bib tap cast copper alloy with crutch or butterfly handle screwed down screed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed |
| 72 | M&L for cutting chases, Pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades shelves lintels etc and cutting chases for concealed water tubiing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed. |
| 73 | S&F 15mm bore CP pillar taps cast copper alloy with capstan heads chromimum plated screwed down high pressure with iron pipe and fixed complete all as specified and directed. |
| 74 | S&F PVC connection15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 75 | S&F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceill complete all as specified and directed.ing or laid in floors |
| 76 | S&F rotational moulded polethylene water tank of 500 ltrs capacity, white coloured, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- complete all as specified and directed. |
| 77 | S&FPVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joint laid in trenches or in floor (ISI marked) complete all as specified and directed. |
| 78 | S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 79 | S&F 75mm dia stack clamp out of 50mmx5mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof. |
| 80 | S&F 75mm bore PVC (SWR) bends with oval acces doorcomplete all as specified and directed. |
| 81 | M&L for PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) concrete bed to drain pipes including packing under and haunching againstthe sides of pipes after they are laid and tested for 150 mm bore pipes complete all as specified and directed. directed. |
| 82 | M&L 150 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars laidin trenches and jointes complete all as specified and directed. |
| 83 | M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landing, cover slab etc including necessary formwork set in cement mortar 1:4 complete all as specified and as directed. |
| 84 | M&L for PCC1:2:4 type B-1 (using20 mm graded crushed stone aggregate) as in benching of man holes rounded or chamfered on edges including all necessary form work complete all as specified. |
| 85 | M&L PCC 1:3:6, type C1 (using 20mm graded crushed stone aggregate) as in coping including weathering slightly rounded or chamfered angles and throating as directed and necessary form work complete all as specified and as directed. |
| 86 | M&L rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed with integral water proofing compound @ 3% by weight of cement or as per manufactures instruction all as specified and as directed Note:- Cost of WPC shall deemed to be included in Quoted rate of this item |
| 87 | S & F PVC (SWR) bends 110mm bore complete all as specified and as directed. |
| 88 | M&L for PCC 1:2:4, type B-1 using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height copings, kneelers, apex stones, bed plates, kerbs not provided for, water throughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed. |
| 89 | M&L for PCC 1:3:6, type C-2 using 40mm greaded stone aggregates as in sub base flooring 100 mm thick for receiving of floor finishes etc all as directed and specified. |
| 90 | M&L Factory made Machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. Note:- Pattern and colour of Machine pressed paver block shall be approved GE |
| 91 | M&L for Septic tanks for 100 users, exc, in any type of soil, foundationin PCC 1:2:4, fly ash brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete. all as perCEBZ TD Drg No-TD/217 Sheet 1 to 7 as attached. |
| 92 | M&L for Construction of Soak well size 1.8m dia and 4.50m deep, excavation in any type of soil, PCC in foundation 1:4:8 brick work in CM 1:6, walls of honey combed masonry, RCC cover slab, filled with brick bats complete all as specified. |
| 93 | S&F 600mmx450mm bevelled adges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed. |
| 94 | Taking down cement plaster any description on brick, PCC block or stone wall etc including racking out joints hacking for key scrubbing down with water etc. all as directed |
| 95 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish offthe premises all as directed . |
| 96 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exc 0.11 sqm but n.exc 0.18sqm, in floors etc, set and jointed in neat cement slurry over and including 15 mm thick screed bed of baddeing layer of mortar 1:6 and pointed in coloured cement to match the shade of tiles complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 97 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exc 0.11 sqm but n.exc 0.18sqm, in vertical surface, for skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick rendering in CM 1:4 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 98 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thick (below or above GL) all as directed |
| 99 | M&L for 100mm thick Plain cement concrete 1:3:6, type C-2 (40mm graded stone aggregate) as in sub base and flooring complete all as specified and directed. |
| 100 | Providing & fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 101 | Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site all as directedand specified. |
| 102 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 103 | M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts or man holes exc half brick not exc one brik andmaking good dismantalled portionin CM(1:3) or cement concrete (1:2:4) type B1 as required. |
| 104 | M&L for 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with screws to timber framework includingexposed surfaces finished with external teak wood lipping, 6 mm thick fixed with nails complete all as specified and directed. |
| 105 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 106 | M&L for providing cement concrete 1:3:6, type C-1 (20mm graded stone aggregate) as in copings etc complete all as specified and directed. |
| 107 | Excavating in post holes (or similar hoels) each n exc 0.5 cum getting out, returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 mtr complete all as specified and directed. |
| 108 | S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and /or reveted, or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, work of water tanks and similar work conforming to FE 290 Gde E-165, complete all as specified as directed. |
| 109 | M & L for Plain cement concrete 1:3:6, type C-1 (20mm graded stone aggregate) as in foundation and mass concrete all as specified and as directed. |
| 110 | S&F in repairs Chromium plated shower rose 250 to 310 mm size dia with or without swivel joints any size including fixing to steel pipe or union etc all as directed and specified. |
| 111 | S&F 15mm dia angle valve cast copper alloy fancy type chromium plated with long shank and cup (concealed type) complete all as specified and as directed. |
| 112 | M&L for preparation of old painted wooden or wood based surfaces of any description n.exc 10 cm in width or girth when unconnected with other painting or when painted in a diferenttint and applying one coat of synthetic enamel paint over and including one coat of red oxide complete all as specified and directed. |
| 113 | M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 114 | M & L in repairs 6mm thick AC sheet corrugated or semi corrugated sheet in roof covering fixed with J and L hook complete all as spd & directed |
| 115 | M & L in repairs6mm thick ACtwo pieces adjustable plain wing ridge fixed with coach screw complete all as spd & directed |
| 116 | Demolition of reinforced cement concrete as in roofs, slabs, floors(other than ground floors) beams, staircases, landing, chajjas, and similar works reinforcement cut as required to facilitate as demolition all as directed and as specified. |
| 117 | M&L for RCC1:2:4, type B1 (using 20 mm graded stone aggregates) as in slabs on walls,Chajja, beams and columns in floors, roofs, landings, balconies, selves, canopies, deck slabs and in shelves, Manhole cover, chajja and the like etc including all necessary form work complete all as specified and as directed |
| 118 | S&F GI tubing "medium grade" galvanized with and including all GI fittings and fixed complete to walls and ceiling or laid in floors 20mm dia including taking down existing fittings and fixtures complete all as specified and as directed. |
| 119 | M&L for Cutting/ Drilling & tapping of existing Cast Iron or steel tubing (Water Mains) up to 80mm diaand inserting suitable GI fittings etc for alterations/addition the branch connection of internal dia 20/25 mmcompleteall as required at site or directed. |
| 120 | Taking up or down galvanised iron / steel tubing and connection complete from any location / position25mm diaincluding for re-fixing or remove to store complete all as specified and directed. |
| 121 | Taking up or down galvanised iron/steel tubing and connection complete from any location / position 20mm diaincluding for re-fixing or remove to store complete all as specified and directed. |
| 122 | Relaying /re-fixing old GI mains25mm dia and connections in new or old position including washing /cleaning, cutting and making newfittings and fixture as directed (serviceability, quantity of pipe obtained from item No 5 here in aboveshall be re-use complete all as specified and directed. |
| 123 | Re-fixing old GI mains20mm dia and connections in new or old position including washing/cleaning, cutting and making newfittings and fixture as directed (serviceability, quantity of pipe obtained from item No 6 here in aboveshall be re-use complete all as specified and directed. |
| 124 | Supply & laying20mm bore GI pipe medium grade including fittings laid in trenches or fixed to wall, ceiling, floor complete all as specified & directed. |
| 125 | All as per Srl item No. 124 here in before but 25mm dia |
| 126 | All as per Srl item No. 124 here in before but 15mm dia |
| 127 | Supply &Stop valve / Gate Valvecast copper alloy, screwed down, high pressure withcrutch or butterfly handle, screwed both ends for pipe 20 mm dia complete. |
| 128 | All as per Srl item No. 127 here in before but 25mm dia |
| 129 | All as per Srl item No. 127 here in before but 15mm dia |
| 130 | Supply and laying of brick well burntlocallyavailablesubclass "B" laid over sand cushioning for cable protection in trenches width ofbrick perpendicullar to the axis of cable complete all as specified and directed. |
| 131 | Material and labour sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be gently punned down to 10 cm complete all as specified and directed. (Note:- Only punned 18 CM thick sand cushioning shall be measured and paid) |
| 132 | Material and labour for Cutting / Boringof road / Hard standing to a size of 30 cm in width and not exceeding 60 cm in depth for laying of protection pipe / water line / Cable including returning filling, including spreading and providing PCC in 1:2:4 B1 using 20 mm grade stone aggregate for the top 100mm layer, complete all as specified and directed. |
| 133 | Supply and laying galvanised iron pipe 25mm bore light gradefixedto poles withsteel clamps laid under road crossing, fixedto wall etc complete all as specifiedand directed. |
| 134 | Supply and laying galvanised iron pipe 50mm bore light gradefixedto poles withsteel clamps laid under road crossing, fixedto wall etc complete all as specifiedand directed. |
| 135 | Supply and laying XLPE insulated armoured heavy duty electric cable of size 10 Sqmm, 2 Core with aluminium conductor 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road / path /drains /along wall / floor /pole / equipment etc. and cable lugs of including taking down of existing cable complete all as specified and directed. |
| 136 | All as per Srl item No. 135 here in before but 16 Sqmm, 2 Core |
| 137 | All as per Srl item No. 135 here in before but 25 Sqmm, 4 Core |
| 138 | Supply andfixing of LED street light 60 Watt, 220V 50Hzmade up pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses withIP66 protection and fix with LT pole/existing pole / Wallcomplete all as specified and as directed. |
| 139 | Supply and fixing ofLED building security light fitting Luminare of 35 Watt made uppressure die cast housing with toughened glass and high power with option of secondary optic with IP 65/66 protection complete with 1.5 meter GI tube and fixing clamps and 3 core copper |
| 140 | S&F in repairs GI bracket made out from GI pipe 25/32mm dia, 1.50 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete. |
| 141 | M & L for fixing of Junction box on steel tubular LT electric pole with suitable MS clamps & nuts bolts and washers etc, the junction box made out with MS sheet including two Nos aluminium strips fixed on set of two Nos porceleinisulators & one No MCB SP 6 A, 240Volts &suitable electric connection to street light complete all as specified and directed. |
| 142 | Supply & Installation high galvanised Steel Mast Light suitable for 6 to 9 Lantern symetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6mm dia 97/19 gauge and double drum winch with luminaire mounting arms, pully assembly, aviation obstrction light, lightning arrester spike including RCC foundation designed for 15 Meter height and proper electric connection & earthingcomplete all as specified & directed. Make- CG/Bajaj/C&S/Havells |
| 143 | Supply and fixingLED light fitting 1x20 watt, 220 volts AC decorative box type with driver, holder including LED tube linghtconnecting up with three core flexible copperconductor cable suitable size from ceiing rose and taking down existing unserviceable luminaire complete all as specified and directed. |
| 144 | S&F in repairsLED bulk head luminaire 10 wattwithEngineering plastic housingand oval shapedclear prismaticdiffuser, heat sink integratedincluding one no. 12Watt LED lamp complete all as specified and directed. |
| 145 | S&Fin repairsLEDluminaire600mmx600mm, 35/36 Watt, 220 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED Lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete.Make: C&S/Havells/Bajaj |
| 146 | S&F ceiling fan 1200 mm sweep complete with blades, down rod and all accessories 230 Volts, copper wounded and marking the serial MES fan nos etcincluding electric connection with three core flexiblePVC insulated copper conductor multistrandedcable 1.0 sqmm complete all as specified and directed. |
| 147 | S&F Exhaust fansteel body AC single phase, 300mmsweep with blades, frame and louverscompleteand making suitable size hole in the wallfor air& grouting of nuts, bolts & washers and marking the serial MES fan nos etc including electric connection with three core flexible PVC insulated copper conductor multistrandedcable 1.0 sqmm complete all as specified and directed. |
| 148 | S & F Wall mounted 450mm (18") heavy duty Air circulatory Wall Fan copper wounded high speed with proper speed controlled regulator & covered with suitable guard protection complete fixed on wallproper with suitable MS clamps,nuts, bolts washersincluding suitable electric connection etc complete all as specified and directed. Make- Havells/ Crompton/ Bajaj |
| 149 | Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed. |
| 150 | M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch drown through and including PVC concealed conduit / Casing caping with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed following for one light point/fan/Exh fan point controlled by one way switch. |
| 151 | All as per item No-150 herein before butOne 3 pin socket oultel 5 Amp on the same board with other switch |
| 152 | All as per item No 150 herein before butOne 3 pin socket oultel 5 Amp independent |
| 153 | All as per item No 150 herein before but2.5 Sqmm PVC insulated sheathed cable and 2.5 Sqmm cable for earth wire for one 5 pin socket outlet 15 Amps |
| 154 | S&F switch, piano flush type, single pole, one way, 5/6 Amps complete all as specified and directed. |
| 155 | S&F Switch Piano flush type single pole one way 15 Amps complete all as specified and directed. |
| 156 | S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed. |
| 157 | S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed. |
| 158 | M&L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch drown through and including PVC concealed conduit / Casing caping with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of modular fittings like switch, socket and fan regulator with inner & outer sheetcover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed following for one light point/fan/Exh fan point controlled by one way switch. Wire Make- Polycab/Havells/ Shalabh |
| 159 | All as per item No. 158 herein before butOne 3 pin socket oultel 5 Amp on same board with indep switch. |
| 160 | All as per item No. 158 herein before butOne 3 pin socket oultel 5 Amp independent |
| 161 | M & L power point wiring for modular fittingsone 5 pin modular socket outlet 16 Amps on independent board with 4.0 Sqmm size of copper cable FRLS grade,multi stranded earth conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) withmetal flush box for mounting ofmodularfitting and cover plate ( metal box, inner and outer plates with cover etc shall be measured and paid seperately under respectiveitems) including one continuous run of PVC insulated (green colour) 4.0 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly inclcutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed. |
| 162 | S&F Modular switch flush type single pole one way 6 Amps |
| 163 | S&F Modular Socket outlet 2 in 1, 3 pin 6 Amp flush type |
| 164 | S&F Modular Switch & Socket combination 2 in 1, 3 pin 6 Amp & 16 Amp flush type. |
| 165 | S&F in repairs Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.make- Havells, Anchor. |
| 166 | S & F in repairsLamp LED 7/9 Watt 230 Voltcomplete. |
| 167 | S&F ceiling rosePVC / polycorbonate isolated body 3 terminals with base plate ISI markedall as specified and directed. |
| 168 | Dismantiling the ceiling fan, examine complete part thoroughly, oiling, greasing all parts, rewinding the old burnt copper binding and complete overhauling of fan including replacement of spares & accessories and reassembling complete fan and making fully functional and Hanging the repairedceiling fans after cleaning, paintingand writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with suitable electric cable including taking down exiting ceiling exhaust fan and disconnecting, dismantling blades complete all as specified. [Note:- Spares & accessories in Item Srl No-169 to 176 shall be measured and paidseparetely.] |
| 169 | Supply only ball bearings suitable for ceiling fan of any sweep. |
| 170 | Supply onlycapacitor 2.5 Mfd, 415 , 50Hz. Make- Universal/Tibcon |
| 171 | Supply only fanhook clamps steel suitable for ceiling fan hanging. |
| 172 | Supply only Rubber Reel in fan hook clamp for ceiling fan hanging. |
| 173 | Supply only fan down rod made of 15 mm bore GI pipe, 45 cm long complete all as specified & directed. |
| 174 | Supply only Canopy PVC suitable for fixing on fan down rod with screws etc. |
| 175 | Supply only Fan blades complete with nuts & washersandcomplete all as specified & directed. |
| 176 | Supply only nut, bolt,washer and split pins suitable for fixing of fan clamps with down rod & hanging of ceiling fan. |
| 177 | M&L for dismentiling the Stator & Rotor of ceiling fan of any sweep, taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing , complete all as specifiedand directed. |
| 178 | Dismantiling the Exhaust fan, examine complete part thoroughly, oiling, greasing all parts and complete overhauling of Exhaust Fan including replacement of spares & accessories and reassembling complete Exhaust fan and making fully functional and fixingthe repaired Exhaust fans aftercleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with three core 1.0 sqmm PVC electric cable with stranded copper conductor including taking down exisitingexhaust fan and disconnecting, dismantling blades complete all as specified. [Note:- Spares & accessories in Item Srl No-179 to 183 shall be measured and paidseparetely]. |
| 179 | Supply onlyball bearings suitable for Exhaust fan of 300 sweep. |
| 180 | Supply onlycapacitor 4.0 Mfd, 415 , 50Hz. Make- Universal/Tibcon |
| 181 | Supply onlymetalic Exhaust fan blade with MS framefor 300mm sweep Exhaust fan complete all as specified and directed. |
| 182 | Supply onlyrubber Pad for Exhaustfan fixing . |
| 183 | Supply onlynut, bolt,washer andsuitable for fixing of Exhaust fan clamps/arms. |
| 184 | M&L for dismentiling the Stator & Rotor of Exhaust fan of any sweep, taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the Exhaust fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing, complete all as specifiedand directed. |
| 185 | S&F in repairsstepped, (socket/switchtype) electronic fan regulator flush type, 180 Watt, 240 Volts on the existing phenolic laminated sheet complete all as specifiedand directed. |
| 186 | M&L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn in existingconduit all as directed. |
| 187 | S&F in repairs MCB DB SPN 4 way 240V with 200 amps rated bus bar double door all as specified and directed. |
| 188 | S&F in repairs MCB DB SPN 8 way 240V with 200 amps rated bus bar double door all as specified and directed. |
| 189 | S&F in repairs MCB Single Pole and Neutral (SPN) of capacity 32 to 63 Amps, 240 volts in proper position all as specified and as directed |
| 190 | S&F in repairs MCB Single Pole (SP) of capacity 6 to 40 amps, 240 volts in proper position all as specified and as directed. |
| 191 | Earthing complete with galvanised steel earth plate electrode 60cmx60cm.x6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of earth plate not less than 1.5metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel and provision of GI tubing light grade(ISI marked) of 15 mmbore pipe for protection of earth lead wire 4.0mm dia includingPCC with 1:2:4 type B1 using 20mm graded crushed stone aggregate CI frame and cover ofangle Iron 40x40x6mm and handle 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 meter long placed on top edge of earthplate, charcoal and common salt filling, test pointmade out of Bronze/Gun metal with fixing arrangement, funnel with wire mesh etc and earth work in soft/loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test pointall as specified and as directed including necessary testing on completion. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
