Military Engineer Services-MES has published Tender For Certain Repairs To Flooring Plastering Joinery Saintary Fittings Plumbing And Water Supply Incl Misc Repair Works To Bldg In Nts And Gurugrambag Area At Afssr Gurgaon And Certain B/R Repairs Aluminium Door Window Joineries Plumbing Sanitar. Submission Date for this Tender is 18-02-2023. Civil Work Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Feb-2023 | Amendment1 | Other | 11-02-2023 |
| 2 | 11-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-02-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, including removal of rubbish outside MoD land, complete all as specified and as directed. |
| 2 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and as directed. |
| 3 | Demolition of brick masonry built in cement mortar as in drain etc., complete all as specified and as directed. |
| 4 | Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and as directed. |
| 5 | Taking down Chowkhats with shutters (without taking of shutter from the frame) of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM1:4 & finished with similar specification as exists, complete all as specified and as directed. |
| 6 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed. |
| 7 | Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified and as directed. |
| 8 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frame) area exc 1.5 Sqm each and not exc 4 Sqm each complete all as specified and AS directed by Engineer-in-Charge. (Note :- Disturbed surface of wall shall be make good by the contractor, the rate quoted shall be deemed included for the same) |
| 9 | Dismantling of cast iron or reinforced concrete drain pipes 150 mm bore, jointed in cement mortar and taking out of trenches complete all as specified and directed. |
| 10 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. |
| 11 | M&L for Cement concrete (1:4:8) type D-2 (Using 40 mm graded stone aggregate)in foundations, filling and mass concrete etc complete all as specified and directed. |
| 12 | M&L for Concrete bed (1:3:6) type C2 (using 40 mm graded crushed stone aggregate)to drain pipes 150 mm including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed. |
| 13 | S&F Reinforced concrete pipes 150 mm bore, class NP2, laid and jointed complete with collars all as specified and directed. |
| 14 | M&L for brick masonry with sub class "B", old size bricks straight or curved on plan exceeding 6m mean radius, built in Cement Mortar (1:4) complete all as specified and as directed. |
| 15 | M&L for Cement concrete type B-1 (1:2:4) with (using 20 mm graded stone aggregate in surface channels and drains etc complete all as specified and directed. |
| 16 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as incoping, bed block, kneels, apex stones etcincluding weathering slightly rounded or chamfered including form work complete all as specified and as directed. |
| 17 | M&Lfor pre cast reinforced cement concrete 1:2:4 type B1 with using 20 mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed. |
| 18 | M&L for Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 19 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 20 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified and as directed. |
| 21 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed. |
| 22 | M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and as directed. Note: The rate quoted by contractor shalldeemed to be included necessary scaffolding and form work as required at site complete all as specified and as directed. |
| 24 | Supply only integral waterproofing compound complete all as specified and as directed. |
| 25 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed. |
| 26 | M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paintwith approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed. |
| 27 | Material and labour for preparation of newly plastered surfaces of walls by applying 2mm cement based Wall care Putty, cutting/ rubbing to obtained a Smooth Surface and applying Two Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed. |
| 28 | M&L preparing old Decorated/Treated Plastered surfaces of Walls by Complete Removal of existing Treatment and by applying Wall Putty, cutting/ rubbing to obtained a Smooth Surface and applying Two Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed. |
| 29 | Material and labour for complete of newly plastered surfaces as of walls and applying twocoats of oil bound distemper over a coat of alkali resistant primer and applying wall care putty 1 to 1.5mm to achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. |
| 30 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 31 | M&L for preparation of new surfaces ofsteel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 32 | Material and labour for preparation of old painted surfaces of steel of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 33 | Material and labour for preparation of old painted surfaces of wood and wood basedof any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 34 | M&L for preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and as directed. |
| 35 | M&L for complete removal of exsisting treatment and preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down andfilling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed. |
| 36 | M&L for removal of existing treatment completely on Ceiling and preparaing the surface forapplying two coat of oil bound distemper to achieve uniform and smooth surface by roller brush over and including cement based wall care putty 1mm thick(average thickness) complete all as specified and as directed. |
| 37 | M&L for preparation of old painted surfaces of concrete and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 38 | M&L for preparing new plastered surface of Ceilling and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed. |
| 39 | M&L for first quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.16 Sq.m, laid in floors with neat cement slurryover and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 40 | M&L for first quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 41 | All as per item Nos 39 & 40 above but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar (1:4) as backing coat complete all as specified and as directed. |
| 42 | M&L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 350x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match with shade of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), complete all as specified and as directed.. Note :- Pattern of the tiles shall be approved by GE at the time of execution. |
| 43 | M&L for Granite 18-20mm thick (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as spd and directed. |
| 44 | M&L Factory Made Machine Pressed Pre-cast Concrete Coloured 60mm thick of M-35 Grade,Interlocking Paver Blocks with Spikes Marks on Top Surface, of any Shape and Size, conforming to IS:15658-2006 with Grey Cement and Pigment including 25mm thick sand cushioning including watering and consolidations etc over and including 75mm thick CementConcrete 1:4:8, type D-2 (40mm graded stone aggregate) Sub-base to Floors, etc. complete all as specified and as directed. |
| 45 | S&F in repairs bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule ccomplete all as specified and as directed. |
| 46 | S&F in repairs Pillar taps, Stop valve , / angle valve fancy type ,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe complete all as specified and as directed. |
| 47 | S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed. |
| 48 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 49 | S & F in repairs 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed. |
| 50 | S&F VitreousChina wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), fixed in repairs, including connection to waste pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed. |
| 51 | S&F in repair plastic water closet seat cover of any color closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, complete all as specified and as directed. |
| 52 | S&F in repair chromium plated brassshower rose 125 mm size with orwitout swivel joints including fxing with 15 mm bore pipe, fixed in repairs, complete all as specified and as directed. |
| 53 | S&F in repairs Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and as directed. |
| 54 | S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed. |
| 55 | S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed. |
| 56 | S&F 110mm bore PVC(SWR) pipes single socketed in any lengthpressure rating 4Kg/Sq cmmedium Grade fixed to walls /trencheswith dash true nut and bolt at every 2mtr length including)includingall fittings, clamps 50mm x 5mm complete all as specified and as directed. |
| 57 | S&F 75mm bore PVC(SWR) pipes single socketed Pressure rating @4Kg/Sq cm medium grade in any length with rubber ring joint, fixed to walls / trenches including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings , clamps 50mm x 5mm,complete all as specified. |
| 58 | S&F110mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 59 | S&F75mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 60 | S&F in repairPVC floor trap 75mm bore with greting including Jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded sstone aggregate) complete all as specified and as directed. |
| 61 | S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed. |
| 62 | S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, complete all as specified and as directed. |
| 63 | S & F 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated and prepared to receive glass, gauge etc edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc size of members shutter as specified in SSR Part I Section 8, Clause 8.23 (a) supplied and fitted to chowkhats complete all as specified and as directed. |
| 64 | S&F factory made 30mm IInd class hard wood Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 65 | S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening complete all as specified and as directed. |
| 66 | S&F in repairsFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 67 | S&F Stainless steel butt hinges medium weight, 100 mm, ISI marked, complete all as specified and as directed. |
| 68 | S&F 200 mm aluminium anodized, barrel tower bolts of extruded section complete all as specified and as directed. |
| 69 | S&F 150mm size aluminum handle fabricated, "D"type, anodized ISI marked complete all as specified and as directed. |
| 70 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 71 | S&F in repair Continuous (piano) hinges, mild steel, bright finish or electro galvanised, 30 mm wide flap (when open), complete all as specified and as directed. |
| 72 | S&F in repair 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with Stainless steel Screws,complete all as specified and as directed. |
| 73 | S&F in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and as directed. |
| 74 | Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed. |
| 75 | S & F 3mm thick ordinaryglass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and as directed. |
| 76 | S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate |
| 77 | Supplying and injecting Low viscous epoxy injection resin for crack injection grouting with (Conbextra EP10 of FOSROC or equivalent) having Flexural strength of 40N/mm² in 7 days and Compressive strength of 45N/mm² in 1 day, by pressure and using injector with accessories till nozzles refused to accept the grout, all tools and materials complete and as directed by the Engineer-in-charge. Application of the products shall be by manufacturer’s. |
| 78 | Taking off existing manholes covers & cleaning of manholes following depth by de-watering and taking off the rubbish / sludge etc., removing the same up to 50 m distance and put into newly excavated pits of suitable size and covering with excavated earth and placing back in position the removed covers complete all as specified and as directed. (a) Depth not exceeding1 metre |
| 79 | All as per above item No 78 above but Depth exceeding 1 metre but not exceeding 3 metre complete all as specified and as directed. |
| 80 | S&F in repairs CP brass health faucet of 15mm bore pipe with 1.5 mtr. Flexible pipe screwed for iron pipe fancy type long body complete all as specified and as directed. |
| 81 | S&F in repairs 32 mm bore and 750mm long PVC waste pipe complete all as specified and as directed. |
| 82 | S&F in repair grating 100mm dia with or wihout waste hole of brass chromium plated fixed on floor/nahani trap with coment mortrar complete all as specified and as directed. |
| 83 | Cleaning and removing all scales and dirt etc by scraping with hard plastic/nylon wire brush and washed with bleaching power solution and thereafter washed with clean water from service water tank and mouth of circulating pipe of capacity of tank (PVC/RCC) exc 250 litre but not exc 500 litre including writing letters " Tank cleaned on _ (date) boldly with thick white/black synthetic enamel paint by using stencil with height & width of each letter & figures 150mm & 10mm respectively complete all as specified and as directed. |
| 84 | All as per above item No 83 above but capacity of tank exc 500 litre and not exc 1000 litre complete all as specified and as directed. |
| 85 | M&L for applying cement paste mixed with RBR compound (Roof Bond Repair) mixed in ratio as per instructions to stop the seepage, applied in sides of Nahni trap/floor traps, W.C traps, junction of CI pipes, bends & similar item junctions to eliminate the seepage complete all as specified and as directed. |
| 86 | M&L Running Welding Work (Mild steel & stainless steel) exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs,including painting the Steel Member to match the existing, complete all as specified and as directed. Note: Hinges are measured and paid seprately) |
| 87 | S&F in repair 150mm long double legged floor door stopper aluminium alloy with rubber etccomplete all as specified and as directed . |
| 88 | S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, including dismantling of old water tank complete all as specified and as directed. |
| 89 | Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and as directed. |
| 90 | S&F MSjoist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars, guard bars, grills, gratings etcfixed independently or framed without connecting plates ,trusses etc any type framing confirming to Grade Fe 410-0 or Fe-310-0 including cutting bending, welding and fixing in position complete all as specified and as directed. |
| 91 | S&F powder coated (Thickness or powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading Stainless steel Screws etc. complete all as specified. |
| 92 | S&F powder Coated (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, Stainless steel Screws etc. complete all as specified. |
| 93 | Taking down existing aluminium door/toughened glass door shutters area n exc 2.5 sqm each and carrying out necessary servicing incl replacement of necesssary parts, Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Stainless steel Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and as directed and taking down unserviceable hardwares and replacing with new hardwares and re-fixing the window shutters in position all as specified and as directed. Notes :- (a)Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule. |
| 94 | S&F Aluminium extruded standard sections, anodised (15 micron) fixed to existing framed doors, partiions etc as in repairs incl taking down existing aluminium sections all as specified and directed. Note : All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufactures catalouge for the corresponding aluminum sections/fittings. |
| 95 | S&F Aluminium extruded standard clips, anodised (15 micron) fixed to existing panels of framed doors, partiions etc as in repairs incl taking down existing aluminium clips all as specified and directed. Note : The clips shall be of section No : 19370 of JINDAL aluminum extrusions or equivalent section in makes as specified and directed. |
| 96 | Supply only double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass and other parts made of heavy duty mild steel all as specified and as directed. |
| 97 | S&F in repairs Door closer hydraulically regulated, universal type suitable for aluminium door shutters and toughened glass including Taking down aluminium side hung/ sliding window/toughened glass shuttersfor servicingand fixing hinges if required |
| 98 | Supply only neoprene beading suitable for fixing glass panes to aluminum door shutters complete all as specified and as directed. |
| 99 | Supply only pivot hinges suitable for aluminium door shutters all as specified. |
| 100 | M&L for Non-asbestos fiber cement building Boards 6.0mm thick, fixed to walls with rawl plugs and steel screws, complete all as specified and as directed. |
| 101 | S&F factory made PVC shutter/ shelves in required size at shape made out of 18mm thick PVC celuka ply one side decorative lamination and other side plain/colour complete including required frame work with panels shall be fabricated using adhesive, screws and solvent cement etc whereever required all the edges shall be covered with 2mm thick bonding tape or 90 degree edge bent complete all as specified and directed. Note: only front Face shall be measured for payment. |
| 102 | S&F factory made PVC 5.5mm thick PVC Celuka ply one side decorative lamination and other side plain/colour complete all as directed by Engr-in-charge. |
| 103 | S & F 4mm thick ordinaryglass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and as directed. |
| 104 | S&F Aluminium anodizedpowder coated Window Double Shutters Glazed and Gauged of Stainless Steel Wire Cloth having nominal dia of Wire 0.36mm and average width of aperture 1.40mm along with Aluminium Section with 50 micron anodizing size of Frame 125x44.5mmx16 gauge having size of Shutter, Top/ Bottom/centralRail shall be 44.5x44.5mm x16 gauge Aluminium Section with 50 micron anodizing and 5.5mm thick Black/ Tinted Sheet Glass to be fixed on Glazed Portion including Aluminium Grill and Stainless Steel Hooks and Eye to be provided as stay of Shutters, etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, Screws anodized Aluminium Fittings such as Peg Stay 150mm long (1 No. for each Leaf), Hinge Type B-21 of 100mm long (2 No. for each Leaf), suitable Handle (1 No. for each Leaf) and 100mm Aluminium Tower Bolts (2 No. in each Leaf), complete all as specified and as directed. NOTE : (a)Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate. (b)For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. |
| 105 | S & F in repairs 125x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate, etc. including PCC 1:3:6 type C-0 filling complete as specified. |
| 106 | S&F Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed. |
| 107 | S&F Aluminium Handle 100mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed. |
| 108 | S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed. |
| 109 | S & F Galvanised mildsteelwire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 110 | S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 111 | M&L for Vitrified cemaictiles dark shade600x600mmarea of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:6 complete all as specified and as directed. |
| 112 | M&L for 25mm thick Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 113 | S & F in repair single towel rall 450mm long fancy type chromium plated fixed with PVC plug and steel screw complete all as specified and directed. |
| 114 | S&F Vitreous China White Squatting Pan of size 580x440mm, "Orissa" Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : HINDUSTAN SANITARYWARE 20042 (Stra White) or equivalent in CERA/ JAQUAR/ PARRYWARE (as approved by GE) |
| 115 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmcomplete all as specified and directed. |
| 116 | M & L for a coat of alkali resistant over already prepared surface of wall complete all as specified and directed. |
| 117 | Providing and applyingplaster of paris putty of 1mm thickness on plastered surface to prepare the surface smooth and finishes complete all as specified and as directed. |
| 118 | M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coat of white wash on old surface of ceiling complete all as specified and directed. |
| 119 | M & L for newplaster surface applying three coat white wash ceiling surface with roller brush complete all as specified and directed. |
| 120 | S & F 4mm thick ordinaryglass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and as directed. |
| 121 | Notesfor all items (i) Removal of plants/trees/Shrubs fromroof tops/sides, external walls of bldg, chajjas, wall junctions, junctions of rain water/CI soil/waste pipe junctions including taking out the roots entered in wall/slab surfacesand making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) including repairing the GI/CI/PVc pipe joints which were damged during cutting/taking out process and cost of same shall deemed to be included in quoted rates of external periodical items. (ii)The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exe 1.00 K m all as directed by engineer -in charge. (iiI) For deciding the girth of the plant/tree the height shall be taken at 30 cm above the slab/wall. (iv)The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be deemed to include the same. (v) All windows, joineries, mirrors, fittings, doors etc. shall be covered before painting the surfaces and the same shall be cleaned including cleaning of floors as directed by the Engineer-in-Charge, failing which a recovery shall be done from the RAR as decided by Garrison Engineer and the quoted rate is deemed inlusive of these provisions. |
| 122 | (vi) Contractor shall store the entire quantity of all type of paints drums in site store with double lock system and key of one lock with contractor and key of second lock with Deptt rep and daily use quantities will be issued to working labour by both parties and daily consumption shall be recorded in proper register duly signed by both parties. (vii) Item Nos 26 to 29, 34 to 36 & 38 shall be executed by authorised applicators/painters trend by paint manufacturer and contractor shall furnish the certificate of same to the deptt before commancement of work. (viii) For Item Nos 26 to 29, 34 to 36 & 38: Removal of existing treatment by scrapping with mechenical wall sander (having mechenical vaccume machinism) having RPM not less than 1500, sand pad of 80 Grit having Dia of 7"/9" to make the surface free from dust, loose paint etc shall be used. Multi purpose mixer shall be used for mixing of wall care putty. Paint shall be applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
