Military Engineer Services-MES has published Tender For Repair To Flooring, Sunken Treatment, Joinery, Plumbing, Sanitary Fittings, Security Perimeter Fencing, Pathway, Improvement Of Security Wall And Other Misc Works At Ratnuchak Mil Stn Under Ge Kaluchak. Submission Date for this Tender is 20-02-2023. Footpath Work Tenders in kaluchak Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Feb-2023 | Revision of BOQ | BOQ | 13-02-2023 |
| 2 | 02-Feb-2023 | Revision of Critical Date | Date | 13-02-2023 |
| 3 | 13-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-02-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed. |
| 2 | Demolition of cement concrete (un-reinforced) of any description in any position not otherwise specifically provided for, complete all as specified & directed. |
| 3 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified & directed. |
| 4 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified & directed. |
| 5 | Non skid ceramic coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed. |
| 6 | Non skid ceramic coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm on vertical surfaces such as skirting/dado etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:4, complete all as specified and directed. |
| 7 | Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqmin floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over& including 15mm thick screed bed in cement mortar 1:4, complete all as specified & directed. |
| 8 | Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm, as in vertical surfaces such as skirting/dado etc., set and and jointed in neat cement slurry and pointed in white or coloured cement to match over& including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 9 | Non skid ceramic coloured tiles,7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but nexc 0.11 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4 andtaking down door shutter and refixing the shutter at same place after laying of tile, complete all as specified & directed. |
| 10 | Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 11 | Granite (of any type),20mm thick as in floor or on cooking platforms, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing over& including 15mm thick screed bed in cement mortar 1:6,complete all as specified & directed. |
| 12 | Machine cut kota stone slab flooring, 18-20 mm thick as per sample kept in GEs office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, grinding and polishinglaid over and including 15mm screed layer in cement mortar 1:6, complete all as specified & directed. |
| 13 | Machine cut kota stone slab, 18-20 mm thick as per sample kept in GEs office as in vertical surfaces such as skirting/dado etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, grinding and polishing, laid over and including 10mm thick screed bed in cement mortar 1:4, complete all as specified & directed. |
| 14 | Precast designer coloured paver tiles (factory made rectified) of size 300mmx300mm x 20mm, top layer glazed made in any type of cement and pigment, in required patterns (compressive strength not less than 250 Kg per Sqcm) as approved by GE in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified & directed. |
| 15 | PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified & directed. |
| 16 | PCC 1:7:14, nominal mix, type F-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified & directed. |
| 17 | 40mm thick PCC 1:2:4, nominal mix, type B1, using 20mm graded crushed stone aggregate as in floor, surface finished even and smooth without using extra cement, laid in alternate bays, complete all as specified & directed. |
| 18 | PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including dismantling of old unserviceable pipe, complete all as specified & directed. |
| 19 | PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including dismantling of old unserviceable pipe, complete all as specified & directed. |
| 20 | 110mm bore PVC (SWR) bends any radius with oval access door, complete all as specified & directed. |
| 21 | 75mm bore PVC (SWR) bends any radius with oval access door, complete all as specified & directed. |
| 22 | PVC (SWR) vent cowl of size 110mm bore, fixed in repairs, complete all as specified & directed. |
| 23 | PVC (SWR)junction single(Single T) equal or unequal, 110mm bore with oval access door, fixed in repairs, complete all as specified & directed. |
| 24 | PVC (SWR)junction single(Single T) equal or unequal, 75mm bore with oval access door, fixed in repairs, complete all as specified & directed. |
| 25 | PVC (SWR) floor trap, plainwith grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, fixed in repairs, complete all as specified & directed. |
| 26 | Low density polyethylene waste pipe, 32mm dia of pressure rating 4 kg/ cm2 with polyethylene union & check nuts, 75cm long suitable for WHB/urinal, fixed in repairs, complete all as specified & directed. |
| 27 | Taking up or down steel tubing and connections 15mm bore, complete all as specifed & directed. |
| 28 | Taking up or down steel tubing and connections 20mm bore, complete all as specifed & directed. |
| 29 | Galvanized iron water tubing, medium grade, 15mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, completeall as specified and directed. |
| 30 | Galvanized iron water tubing, medium grade, 20mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, completeall as specified and directed. |
| 31 | PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, fixed in repairs, complete all as specified & directed. |
| 32 | PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified & directed. |
| 33 | Stop valves, 15mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy,screweddown, high pressure with crutch or butterfly handle, both ends screwed for iron pipe orfor union etc., fixed in repairs, complete all as specifed & directed. |
| 34 | Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore,fixed in repairs, complete all as specified & directed. |
| 35 | Bib tap, 15mm bore, fancy type, chromium plated,cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified & directed. |
| 36 | Angle valves, 15mm bore, fancy type, chromium plated capstan head, cast copper alloy,screweddown, high pressure, both ends screwed for iron pipe orfor union etc., fixed in repairs, complete all as specifed & directed. |
| 37 | Vitreous china wash down water closet (Pedestal pattern), white with‘P’ or ‘S’ trap, plastic water closet seat, white, closed pattern with flat bottom and cover, mild steel chromium plated or aluminium hinging device, chromium plated jet nozzle with 1500mm long PVC pipe fixed with screws of suitable size includingmaking connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, fixed in repairs, complete all as specified & directed. |
| 38 | Vitreous chinaware squatting pan, "Orissa Pattern" size 580mm x 440mm with integral foot rests, white, with ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repairs,complete all as specified & directed. |
| 39 | Vitreous china, wash hand basin, flat back, white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, chain and plug, porcelain stopper, 32mm dia PVC waste pipe including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed. |
| 40 | Brass chromium plated WHB mixer for mixing hot & cold water, single hole, screwed down for iron pipe, bore of pipe 15mm, fixed in repairs, complete all as specified & directed. |
| 41 | Brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm boreof pipe, fixed in repairs, complete all as specified & directed. |
| 42 | Toilet paper holder with flap, brass chromium plated, fixed to walls with CP brass screws, fixed in repairs, complete all as specified & directed . |
| 43 | Jet spray CP with 1 mtr long tube for 15mm bore pipe and mild steel chromium plated hinging device for pedestal type WC, fixed in repairs, complete all as specified & directed. |
| 44 | Chromium plated hand shower (Health Faucet) with with 8mm dia 1 meter long easy flex tube in chrome finish & wall hook, fixed in repairs, complete all as specified & directed. |
| 45 | PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified & directed. |
| 46 | 600x450x6mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws & cup washers, fixed in repairs, complete all as specified & directed. |
| 47 | PVC bath cabinet made of ABS material of size 450x600mm with glass front, complete all as specified & directed. |
| 48 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repairs, complete all as specified & directed. |
| 49 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc. 10cm girth in brick/stone walls, complete all as specified & directed. |
| 50 | Brass chromium plated shower rose of 125mm size, fancy type with or without swivel joints, fixed in repairs, complete all as specified & directed. |
| 51 | Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs with chromium plated brass screws & wooden/plastic cleats, complete all as specified & directed. |
| 52 | Viterous china urinal, half stall type, whitewith grating and union for discharge pipe, complete including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement,with flush pipe, waste coupling and urinal spreader, fixed in repairs, complete all as specified & directed. |
| 53 | Screed bed or bedding layer of cement mortar1:6, 15mm thick for laying floor finishes, complete all as specified & directed. |
| 54 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed. |
| 55 | Solid PVC door/cup board frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed. |
| 56 | Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beadingand joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified & directed. |
| 57 | Aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long, complete all as specified & directed. |
| 58 | Butt hinges, medium weight, cold rolled, mild steel 100mm long, complete all as specified & directed. |
| 59 | Aluminium handle, cast type, anodised, 150mm long, complete all as specified & directed. |
| 60 | Complete removal of the existing sunken treatment including roughening and preparation old surfaces of concrete floor by picking, scurubbing down with steel brushes, sweeping clean and washing down with water to remove dust etc and applying the followingtreatment :- (a) 15 thickrendering on fair faces of brick work or cement surfaces in cement mortar 1:4 with using integral water proofing compound as per manufacturer instructions byweight of cementtosunkenportion including wall of sunken portion with proper slope towardsoutsideand finishing cement concrete or brick work surface even and smooth using extra cement, finishing concrete including walls of sunken portion with proper slope. (b) Applying 2nd course of bitumenous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (c) Applying 3rd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. |
| 61 | (d)Applying 4th course of APP (Atactic Polypropylene) modified polymeric membrane 3mm thick weight not less than 3.6 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (e)Applying 5th course of a coat of bonding materialwithblown type bitumen of grade 85/25 heating to aworking temperature of 180° C and applied @ 1.2 Kilogram/Square Metre. Note : Ponding shall be done in sunken portion area by filling water which shall be kept there for 48 Hours. In case a slightest indication of seepage/leakage is noticed, the same shall be rectifird by grounting the effected area at no extra cost. Thereafter, ponding shallbe repeated till there is no indication of seepage/leakage. The arrangements of ponding to be included in quoted rates and nothing shall be admissible on this account. |
| 62 | Galvanized iron tube as in spout pipe, medium grade, 40mm bore in short length of 45cm, cut to shape required including cutting/ drilling holes through RCC beam/brick wall by mechanical mean exc 300mm deep and making goodin cement mortar 1:3, completeall as specified & directed. |
| 63 | Complete removal of existing treatment from old decoratedplastered surfacesof walls and applying two coats of oil emulsion distemper over a coat of primer over 2mm thick wall care putty, complete all as specified & directed. |
| 64 | Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed & directed. |
| 65 | 15mm thick rendering in cement mortar1:6 onfair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified & directed. |
| 66 | 5mm thick rendering in cement mortar1:3 on concrete surfaces of chajjas, upward fascias, ceiling and similar items, surface finished even and smooth without using extra cement, complete all as specified & directed. |
| 67 | Preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whitening, complete all as specified. |
| 68 | Preparation of new plastered surfaces of ceilingand applying three coats of white wash, complete all as specified & directed. |
| 69 | Supply only integral water proofing compound, complete all as specifed & directed. |
| 70 | Taking down aluminium chowkats with shutters ofany size/description including glass panes, rubber packing, snap beading, particle/partition board etc, complete all as specified & directed. |
| 71 | Aluminium anodised powder coated (minimum thickness 50 micron) frame for door of size 101.60mm x 44.45mm made out of 2.01mm thick aluminium section, fixed to floor/wall with plugs and screws, complete all as specified & directed. |
| 72 | Aluminium anodised powder coated (minimum thickness 50 micron) door shutter, rails (top, middle and style ) of size 82.53 x 44.45mmand bottom rail of size 114.30 x 44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, mortice lock having six levers, aluminium body hydraulic door closer of suitable size, handles 2 Nos in each shutter, tower bolt, hinges etc., anodised aluminium snap beading screws, complete all as specified & directed. Note : Sheet glass & PVC sheet for panels will be measured and paid for separately under respective item. |
| 73 | Aluminium anodised powder coated (minimum thickness 50 micron) window/ventilator shutter, section of size 44.45 x 44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, suitable handle 1 No in each shutter, tower bolt, hinges 110mm long, anodised aluminium snap beading screws, complete all as specified and directed. Note : Sheet glass will be measured and paid separately under respective item. |
| 74 | Aluminium anodised powder coated (minimum thickness 50 micron) glazed window shutter type using 1.60mm thick aluminium open three track (02 Nos. glazed one No wire mesh shutter) made of aluminium section ofsize44.45mm x 44.45 mmincluding necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, anodised aluminium fittings such as aluminium handle / tower bolt /hinge etc,complete all as specified & directed. Note : Sheet glass & wire mesh will be measured and paid separately under respective item. |
| 75 | PVC hollow profile 12mm thickness design and pattern as approved / directed at site, complete all as specified and directed. |
| 76 | 5mm thick tinted glass as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) of size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket,complete all as specified & directed. |
| 77 | Anodised aluminium powder coated (minimum thickness 50 micron) designer grill of 5-6mm dia of mesh size 50x50mm centre to centre with 25mm flat as per sample kept in GEs office including aluminium beading, complete all as specified & directed. |
| 78 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, complete all as specified & directed. |
| 79 | Aluminum (die cast) body door closer hydraulically designation No 3 Universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 Kg, fixed in repairs, complete all as specified & directed. |
| 80 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed. |
| 81 | Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for(Reinforcement cut as required to facilitate demolition), complete all as specified & directed. |
| 82 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified & directed. |
| 83 | 100mm thick PCC 1:2:4, nominal mix, type B2, using 40mm graded crushed stone aggregate as in pavement, hard standing, path etc, surface finished even and fair, laid in alternate bays including form work, complete all as specified & directed. |
| 84 | PCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in benching, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified & directed. |
| 85 | 75mm thick PCC 1:4:8 (nominal mix), type D-2 using 40mm graded crushed stone aggregate as in sub base of floor, complete all as specified & directed. |
| 86 | Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified & directed. |
| 87 | Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6 but except brick i.e. using serviceable bricks obtained from Srl item No. 79 here-in-before, complete all as specified & directed. |
| 88 | RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified & directed. |
| 89 | Use & waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc alo splays between floors and beams for rough finished surfaces of concrete, complete all as specified & directed. |
| 90 | TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified & directed. |
| 91 | TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified & directed. |
| 92 | Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified & directed. |
| 93 | Mild steel framed work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified & directed. |
| 94 | Mild steel framed work as in grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade-E-165, complete all as specified & directed. |
| 95 | Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 grade-E-165, complete all as specified & directed. |
| 96 | 15mm thick rendering in cement mortar1:4 onfair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified & directed. |
| 97 | 15mm thick rendering in cement mortar1:4 on other than fair faces of brick surfaces, finished even and smooth without using extra cement, complete all as specified & directed. |
| 98 | Preparation of new plastered or concrete surfaces of wallsand applying two coats of cement base paint of any tint over a coat of cement primer, complete all as specified & directed. |
| 99 | Preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats ofsynthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified & directed. |
| 100 | Machine Pressed precast concrete interlocking paver block any shape and size M-35 Grade,60mm thick confirming to IS-15658-2006 with grey cement and pigments laid over and including 50mm thick sand cushioning,complete all as specified & directed. |
| 101 | Preparation of new plastered surfaces of wallsand applying three coats of white wash, complete all as specified & directed. |
| 102 | Glass dividing strips, 3mm thick and 38mm wide, complete all as specified & directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
