Tender For Repair / Renewal And Day To Day Maintenance Of Lt Oh Line, Lt Ug Cable, Lt Panel, Street Lights, Water Supply Distribution System, Replacement Of Control Valve, Valve Points, Leak Proof Valves, Water Testing And Allied Works At Cda / D, Secunderabad-Telangana

TDR : 35849016

Tender Notice
Corrigendum Details
BOQ

Expired

Secunderabad , Telangana

Tender Brief : Corrigendum : Tender For Repair / Renewal And Day To Day Maintenance Of Lt Oh Line, Lt Ug Cable, Lt Panel, Street Lights, Water Supply Distribution System, Replacement Of Control Valve, Valve Points, Leak Proof Valves, Water Testing And Allied Works At Cda / D

Document Fees
₹ 500 /-

EMD
₹ 96000.0 /-

Tender Value
₹ 48 Lakhs /-

Submission Date
15-02-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	08-02-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	15-02-2023
2	02-02-2023	Amendment	Other	08-02-2023

Name of Work:REPAIR/ RENEWALAND DAY TO DAY MAINTENANCE OF LT OH LINE, LT UG CABLE, LT PANEL, STREET LIGHTS, WATER SUPPLY DISTRIBUTION SYSTEM, REPLACEMENT OF CONTROL VALVE, VALVE POINTS, LEAK PROOF VALVES, WATER TESTING AND ALLIED WORKS AT CDA/DAD COMPLEX, PAO(OR) AOC, PAO(OR) EME/RUDRAMA GUEST HOUSE UNDER GE (U) SECUNDERABAD

Sl. No.	Item Description
1	M&L for attending, repair and rectification of external LT electric supply complaints on up to 1100Volts grade, over head/underground system alongwith necessary T&P, safety devices as per site requirement for the following type of complaints complete all as specified and directed:-
2	Replacement of worn out jumpers, jointing and tightening with new ACSR conductor.Note:- Single phase/two wire or 3 phase/4 wire system will be considered as one job for payment purpose.
3	Disconnecting from over head conductor, cutting worn out portion of LTcables of any type and size, carry out repairs including taking out cables from under ground loop line and rejoining the same to restore electric supply.Note :- (i) LT Jointing Kits, Cable protection Pipe if required at site will be measured and paid separately.(ii) Quoted rate is deemed to be inclusive of cutting and removing the pole coping and inserting the cable alongwith protection pipes.
4	Taking down old unsv Street light / flood lightfittings in any position of any capacity forRepair by replacement of unsv spares ( SPD / Driver / MCBs etc ) and re-fixing the same in existing location.Note:- Spares for repair of street light fittings will be measured and paid under respective items.
5	Notes for Item Nos 1.01 to 1.03 :-(a)The contractor will be allotted complaints at MES complaint cell on daily basis on all working days and sufficient resources will be deployed by him/her for completion of day to day complaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit without intimation of sufficient cause, penalties will be recovered twice of the quoted rate for each un-attended complaint. (b)A detailed log of complaints with completion/non-completion remarks from users/MES will be maintained by the contractor and the same will be updated on daily basis in consultation with Engineer-in-Charge or JE E&M as detailed.(c)The contractor will make suitable arrangement for emergency complaints and will notify auth rep/Engineer-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint.In case of any dispute the decision of accepting officer will be final and binding in this regard.(d)The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints.(e)The quoted rate is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Military station at Secunderabad.(f)The contractor will maintain location wise record of each spare utilized as per inventory format given by AGE E/M, Secunderabd and the same shall be submitted to E/M No II store on daily basis.
6	M&L for ACSR conductor, steel reinforced for LT over head lines on poles including streching tightining of poles insulator with binding wire of suitable size with insulator/streching of ACSR conductor including disconnecting/taking out old existing unsv ACSR conductors complete all as specified and directed.
7	M&L for Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade, including disconnecting/taking out old existing unsv insulators complete all as specified and directed.
8	M&L for Shackle type,Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts of size 100 mm height, 115 mm dia for 1100 Volt grade, section of straps 31x5 mm, including disconnecting/taking out old existing unsv insulators complete all as specified and directed.
9	S&F Stay assembly comprising of 7/10 SWG galvanised MS stranded stay wire of required length, minimum tensile strength 70 Kg/mm (grade-2 quality) fixed to pole with and including FIclamps, bolts, nuts, washers, galvanised steel stay rod 16mm dia 180 cm long bow 400 x 14 mm nuts/bolts, washers, loop type insulator of size 65 x 90 mm vitreous, clearance dia of hole 16mm, stay plate of size 230 x 230 x 6 mm including necessary excavation and earth work PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in foundation and disposal of surplus soil, upto 50m including disconnecting/taking out old existing unsv stay assembly complete all as specified and directed.
10	S&F of Galvanised steel wire (GI) 4mm dia including disconnecting/taking out old existing unsv GI wire complete all as specified and directed.
11	M/L for cross arms, bracing, supports clamps and back plates fabricated from structural steel section incl nuts, bolts washers, welding, bending cold or hot drilling holes for bolts in any shapes or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including disconnecting/taking out old existing unsv cross arms complete all as specified and directed.
12	S&F MCCB along with both side spreader link and nut bolts of appropriate size(Conforms to IEC:60947-II/IS:13947-II) in exisitng LT Panel box/Feeder Pillar boxes (KIOSK),in MCCB DBsof capacity 315-400 Amps, 4 Pole, 35 KA, 415 Volt including disconnecting/taking out existing old unsv/burned MCCB complete all as specified and directed. Make :Havells/Standerd/L&T/ HPL/C&S
13	All as per item No- 08 here in before but of capacity 250 Amps, 4 pole, 25 KA
14	All as per item No- 08 here in before but of capacity 200 Amps, 4 pole, 25 KA
15	All as per item No- 08 here in before but of capacity 160 Amps, 4 pole, 16KA
16	All as per item No- 08 here in before but of capacity 125 Amps, 4 pole, 16 KA
17	All as per item No- 08 here in before but of capacity 100 Amps, 4 pole, 16 KA
18	All as per item No- 08 here in before but of capacity 63 Amps, 4 pole, 16 KA
19	S&F MCB, SPN 10-32 Amps, 415 Volts with breaking capacity 6KA, including disconnecting/taking out existing old unsv/burned Isolator complete all as specified and directed.
20	S&F MCB, TPN 10-32 Amps, 415 Volts with breaking capacity 6KA, including disconnecting/taking out existing old unsv/burned Isolator complete all as specified and directed.
21	S&F MCB, SP 10-32 Amps, 415 Volts with breaking capacity 6KA, including disconnecting/taking out existing old unsv/burned Isolator complete all as specified and directed.
22	Supply and fixing of automatic street light switch using infrared sensor based nature switch for automatic switching of street lights.Nature switch operation should bebased on natural light lux level. Required illuminance level for switching on is < 30 Lux and for switching off >10 lux. The sensor should also have part night operation facility of min 4 hrs to max 12 hrs.The sensor along with suitable power contactors incoming outgoing MCBS SP andand automanual (sensor bypass selection option should be enclosed in a pole /wall mountable enclosure made of rust proof electric shock proof termite proof and FR grade SMC Box conforming to IP54 three phase load of 12 KW with Circuit wiringmin 25 sq mm 3 nos contactor each of 20-25 amps incoming outgoing MCB (3 nos) rating 20-25 amps Make : Model no Swadeep-02 EC 8KW 1P or equivalent as approved by GE.
23	Supply and fixing of automatic street light switch using infrared sensor based nature switch for automatic switching of street lights.Nature switch operation should bebased on natural light lux level. Required illuminance level for switching on is < 30 Lux and for switching off >10 lux. The sensor should also have part night operation facility of min 4 hrs to max 12 hrs.The sensor along with suitable power contactors incoming outgoing MCBS SP andand automanual (sensor bypass selection option should be enclosed in a pole /wall mountable enclosure made of rust proof electric shock proof termite proof and FR grade SMC Box conforming to IP54 three phase load of 12 KW with circuit wiringmin 10 sq mm, 3 nos contactor each of 40 - 50 amps, incoming outgoing MCB (3 nos) rating 40 amps of breaking capacity 10 KA complete including necessary clamp (2 sets) / anchor bolt (4 nos)for fixing on pole / walllcomplete all as directed including taking down old one.Make : Model no Swadeep-02 EC 12KW 3P or equivalent from Havells/Legrand as approved by GE.
24	supply and fix Nature switch operation should be based on natural light lux level. Required illuminance level for switching on is < 30 Lux and for switching off >10 lux. The sensor should also have part night operation facility of min 4 hrs to max 12 hrs. completeincluding taking down old one. Make swadeepModel Nature switch -02 (sensor) or equivalent as approved by GE
25	supply and fix Nature switch operation should be based on natural light lux level. Required illuminance level for switching on is < 30 Lux and for switching off >10 lux. The sensor should also have part night operation facility of min 4 hrs to max 12 hrs. The nature switch to be fiffed in a IP 54 SMC enclosure and protected with MCB SP 10 Amps completeincluding taking down old one .Make swadeepModel Nature switch -02 E (sensor) or equivalent as approved by GE.
26	Supply, lay, commissioning and testing of cable jointing Kit Heat shrinkable type for 1100 V grade cable for straight through jointwith jointing material and accessories suitable forLT UGcable of size16 to 50 Sqmm, 3.5 Core complete all as specified and directed.
27	All as per item No 22 here in before but suitable foraluminium conductor cable of sizefrom 70 sqmm, 3.5 Coreto 95 Sqmm, 3.5 Core
28	All as per item No 22 here in before but suitable foraluminium conductor cable of sizefrom 120 sqmm, 3.5 Coreto 185 Sqmm, 3.5 Core
29	All as per item No 22 here in before but suitable foraluminium conductor cable of sizefrom 240 sqmm, 3.5 Coreto 300 Sqmm, 3.5 Core
30	Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size16 to 50 Sqmm, complete all as specified and directed.
31	All as per item No 26 here in before but suitable foraluminium conductor cable of sizefrom 70 sqmm, 3.5 Coreto 95 Sqmm, 3.5 Core
32	All as per item No 26here in before but suitable foraluminium conductor cable of sizefrom 120 sqmm, 3.5 Coreto 150 Sqmm, 3.5 Core
33	All as per item No 26 here in before but suitable foraluminium conductor cable of sizefrom 185 sqmm, 3.5 Coreto 240 Sqmm, 3.5 Core
34	Supply and lay in trenches/fixed to walls/poles etc , connecting by using lugs and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with aluminium conductor of 2 Core 10 Sqmm incl taking out of existing cable all as directed. Make : Havells/FinolexNote :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately.
35	All as per item No - 30 here in before but 4 Core 10 Sqmm
36	All as per item No - 30 here in before but 4 Core 16 Sqmm
37	All as per item No - 30 here in before but 3.5 Core 25 Sqmm
38	All as per item No - 30 here in before but 3.5 Core 35 Sqmm
39	All as per item No - 30 here in before but 3.5 Core 50 Sqmm
40	All as per item No - 30 here in before but 3.5 Core 70 Sqmm
41	All as per item No - 30 here in before but 3.5 Core 95 Sqmm
42	All as per item No - 30 here in before but 3.5 Core 120 Sqmm
43	All as per item No - 30 here in before but 3.5 Core 150 Sqmm
44	All as per item No - 30 here in before but 3.5 Core 185 Sqmm
45	All as per item No - 30 here in before but 3.5 Core 240 Sqmm
46	Taking out and Relaying of LT cable of size 10sq mm to 50 Sqmm 2/3.5 coreafter carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugsall as specified and directed by Engineer in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item)
47	Taking out and Relaying of LT cable of size 70 sq mm to 150 Sqmm 3.5 coreafter carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugsall as specified and directed by Engineer in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item)
48	Taking out and Relaying of LT cable of size 185 sq mm to 300Sqmm 3.5 coreafter carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugsall as specified and directed by Engineer in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item)
49	Supplying, erecting and fixing steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 mtrs long)including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellowpaint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2\" (inch) wide including taking down old unserviceable PCC poles of any type complete all as specified and directed.Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.
50	Restreching/Restringing, tightening and repair to overhead line ACSR conductor of any size on LT poles including necessary Aluminium binding wire connectors PVC sleeves for jumper, fixing of insulators and prunning of tree complete all as specified and directed. Notes: (i) The distance between pole to pole in one span (contains 2/4/6 runs) i.e one span will only be considered for payment purpose. (ii) No Extra conductor will be measured for binding to insulators / jumpering etc.
51	Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation of PCC/Steel pole, laying of cable in trenches etc and getting out in Hard / Densesoil complete all as specified and directed.
52	All as per item No 47 here in before but depth exc 1.5 mtr but not exc 3 mtr.
53	Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed.
54	Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
55	Supplying and laying reinforced precast concrete cable cover class LV , Type 1 flat with size 250mmx150 mm x 40mm all as specified and directed by Engineer-in-Charge.
56	Supply and Laying bricks, common burnt clay building bricks, sub class \"B\" of size 210 x 110 x 70 mm laid across in trenches for cable protection complete all as specified and directed.
57	Spreading riddled earth ( after preparation of excavated earth) inCable duct forcushioning of cable laid in trenches complete all as directed by Engineer-in-ChargeNote:- Punned thickness 18 CM( 6.25 Cm below cale and 11.75 cm above cale)will be measured for payment purpose. The earth removed during excavation to be used as rddled earth after crushing and sieving. Quoted rate inclusive of all arrangement as mentioned.
58	Laying only old Brick in trenches for Under Ground Cable Protection (Serviceable Materials obtained from Item No. 1 here-in-before), complete all as directed.
59	M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate for filling & foundation of pole & mass complete all as directed
60	M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate for filling & foundation of pole & stay complete all as directed
61	M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate for coping of pole complete all as directed
62	Supply and laying GI tubing light grade of size 80 mm for cable protection on road/drain/floor/pole including necessary clamps 40 x 4 mm.
63	All as per item No - 58 here in before but 50 mm bore
64	All as per item No - 58 here in before but 40 mm bore
65	S&F LT line rigid PVC Spacers spiral type, two lines, Phase to phase distance 300 mm, spacer rod dia 13 mm, spiral hole dia 5-6 mm and spiral length 250 mm.
66	S&F LT line rigid PVC Spacers spiral type, three lines, Phase to phase distance 600 mm, spacer rod dia 13 mm, spiral hole dia 5-6 mm and spiral length 250 mm.
67	S&F LT line rigid PVC Spacers spiral type, four lines, Phase to phase distance 900 mm, spacer rod dia 13 mm, spiral hole dia 5-6 mm and spiral length 250 mm.
68	Cutting the existing road/PCC surface straight by manual, depth and width not less than 1 mtr below ground level for passing of underground cable and filling back with excavated soil upto 75% road portion and 25% shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and directed.
69	M&L for road crossing/drain crossing by adopting trench less tunneling work through specified pipe jacking method by erecting the equipment to true to the allignment and gradient by haidrolic pipe jacking technique complete including tunneling, excavation in any type of soils including hard rock, HDPE / GIpipe medium dutyduty of size 100 mm diain any length including jointing materials to carry LT UG cables of size upto 240 Sqmm and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned authorites complete all as specified and as directed. Note: Pipe will be measured and paid separately under relevant items.
70	M&L for replacement of broken earth pit made out of PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate, 20 mm thick and earth pit cover made out of RCC 1:2:4 type B1, cover reinforced with 8 mm dia MS deformed bars @ 100 mm centre to centre both ways with hook made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and including reconnecting of earth lead of any type with new nuts, bolts and washers etc as required at site complete all as specified and directed.
71	M&L repair/maintenance of stay by tightening of stay wire after untying the conductor spans from the poles to make correct tensions and maintain verticality of poles, including re-jointing the conductors in position with new binding wire complete all as specified and directed.
72	M&L for painting the existing LT steel poles of 9.0 Mtr long including cross arms, clamps, street light junction boxes etc with 1 coats of aluminium paintincluding throughly cleaning the existing surface, writing of pole numbers in yellow circle 15 cm with black paint on poles. Painting the poles up to 1.5 Mtr height with alternate bands 30 cm height (3 Nos black and 2 Nos Yellow) from ground level, complete all as specified and directed.
73	M&L for Painting the existing LT PCCpoles with 1 coats of synthetic enamole base paintincluding painting of cross arms, clamps, etc with one coat of aluminium paint and providing alternative band of 30 cm width (3 black and 2 yellow) from bottom of pole to 1.5 metres height , writing of pole numbers in yellow circle15 cm with black paint on poles complete all as specified and directed.
74	M&L preparing Steel and Iron Surfaces of any description, over 100mm width or girth and applying One Coats of Synthetic EnamelPaint (First quality) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
75	Advance Maintenance Free G.I. SAFE EARTHINGElectrodewith PIPEof not less than 50 mm outer dia) and two meterlength, The electrode should be ofgalvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compoundto provide maximum contact between the electrode and Back Fill Compound. The earting pitcover should be factorty built (sizeTOP- 10 Inch, Bottom -13 Inch, Height 10.25 Inch ) made of heavy duty Polypropylenecomplete all as specified and directed.
76	S&F galvasised steel strip 32X6 mm with saddles and fixing screws on poreceling insulator/ spacer fixed at every 1 mtr length as lightening conductor on roof/wall of explosive building and joining the same with existing earth test point all as directed by Engineer-in-Charge.
77	Cutting unaxious green growth and grass by manual labour or by machine at all 11 KV Electric Installation premisses/around 2/4 Pole structure/along the boundary fencing and removing rubbish from the site of work complete all as specified and directed.
78	Trimming/pruning and removing of tree branches or any other foreign objects from HT/LT over head conductor and clearing the OH Line of any type and size for one span of any length in 2 way /4 way/6 way conductor system. Notes: (i) Insulators of any type, connectors and ACSR conductor of any size required at site will be measured and paid separately under relevant item of this schedule. (ii) The contractor is responsible for provision of Necessary T & P and safety equipments to complete the job.
79	S&F LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10 KVBuilt-in-Surge Protection Device,road way light fitting with high power LED as light source of capacity 90 watts with suitable drivers etc and connecting with 1.5 Sqmm copperconductor PVC insulated three core weather proof cable etc, fixing to wall/pole, complete all as specified and directed. Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.Note :(i) LED\"s used should be the make of Cree/Osram/Lumilieds/Nitchia.(ii) Contractor has to produce LM-79/LM-80 certificate alongwith purchase vouchers.(iii) Surge protection of the drive should be 10 KV
80	All as per item No-75 here in before but 70/72watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.
81	All as per item No-75 here in before but 60 watts. Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.
82	All as per item No-75 here in before but 100 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.
83	All as per item No-75 here in before but 120 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.
84	All as per item No-75 here in before but 150 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.
85	All as per item No-75 here in before but 200 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.
86	S&F LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrossion resistant complete with driver and lamp die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting, with high power LED as light source of capacity 120 watts with suitable drivers etc and connecting with 4.0 Sqmm aluminium conductor PVC insulated twin core weather proof cable etc, fixing to wall/pole complete all as specified and directed.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.Note :(i) LED\"s used should be the make of Cree/asram/Lumilieds/widchia (ii) Contractor has to produce LM-79/LM-80 certificate alonwith purchase vouchers and Guarantee certificate from Manufacturer. (iii) Surge protection of the driver should be 10 KV.
87	All as per item No-82 here in before but 120 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.
88	All as per item No-82 here in before but 150 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.
89	All as per item No-82 here in before but 200 watts.Make :Bajaj / Havells /SURYA / Wipro/crompton/philips/halonix/luker.
90	Supply and fix Smart Bright all in one solar LED street light of 50 watt capacity, range up to 12000 lumen with inbuilt lithium ferro phosphate batteries, monocrystalline solar panel and MPPT charge controller all as directed. Make : Philips model No BRP111 LED 50/757 / wipro or equivalent as approved by GE.
91	Supply, fixing, connecting and testingpost top light fitting in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environmental friendly long life aesthetically desinged aluminium decorative luminaires with high power LED as light source of capacity1X15/20 watts, fixed on the Pole/Wall/top of gate piller in any position including taking down old existing light fitting of any type and capacity complete all as specified and directed.Make: CG MODEL NO LPTH 20 CDL/Havells Cat No. RUBYMINIPT15WLED757PSYMTOPC or Wipro cat No.LP07-2511-XXX-57-CL as approved by GE.
92	Supply, fixing, connecting and testingpost top light fitting in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environmental friendly long life aesthetically desinged aluminium decorative luminaires with high power LED as light source of capacity1X35/40 watts, fixed to Pole/Wall/top of gate piller in any position including taking down old existing street light fitting of any type and capacity complete all as specified and directed.Make: PHILIPS Cat Part No BGP161 LED2500/NW PSU 220-240V 7043 IN or CG MODEL NO LPTO 40 CDL/ Surya model lP07 501-XXX-57-CL/Havells Cat No. RUBYPT35WLED757PSYMTOPC or Wipro cat No.LP07-501-XXX-57-CL as approved by GE.
93	Supply, fixing, connecting and testing decorative LED Bollard light with opal diffuser and aluminium reflector of 8/9/11 watt LEDincluding nut, bolts, washers, clamps etc as in repair complete all as specified and directed. Make:- C&S Cat Part No LTGLCW9WLED or SURYA MODEL NO SLEBL 6W BLK800or Havells Cat No. BAMBOOBL8WLED830SSYMTOPCM (1.0) or Wipro cat No.LB14-131-XXX-65-05 as approved by GE..
94	Supply and fix locally availablegate / garden lightlight best qualitymetal Silver / metal blackDecorative Exterior of size not less than 300 mm X220 mm with and including LED bulb 9 wattsuitable for outdoor installationandsuitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directedincluding taking down old one .
95	Supply and fix locally availablegate / garden lightlight best quality Black Color Steel Shade With Fiber Glass Outdoor Gate Lampof size not less than 360 mm X250 mm with and including LED bulb 9 wattsuitable for outdoor installationandsuitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directedincluding taking down old one . Make Jhoomarwala model SKU: (PM-GT-10-BIG) or equivalent as approved by GE
96	Supply anfd fix locally available Acrylic glob light best quality clear with and including LED bulb 9 watt of 200 mm dia complete suitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directed including taking down old one .
97	Supply anfd fix locally available Acrylic glob light best quality clear with and including LED bulb 9 watt of 300 mm dia complete suitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directedincluding taking down old one .
98	Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS cretifiedsuitable for60 watts LED street light fittings of any makecomplete all as specified and directed. Make : Bajaj/surya/power palazzo/Philips/Wipro/Havells.
99	Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS cretifiedsuitable for70/72 watts LED street light fittings of any makecomplete all as specified and directed. Make : Bajaj/surya/power palazzo/Philips/Wipro/Havells.
100	Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS cretifiedsuitable for90 watts LED street light fittings of any makecomplete all as specified and directed. Make : Bajaj/surya/power palazzo/Philips/Wipro/Havells.
101	Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS cretifiedsuitable for 100 watts LED flood light fittings of any makecomplete all as specified and directed. Make : Bajaj/surya/power palazzo/Philips/Wipro/Havells.
102	Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS cretifiedsuitable for 120 watts LED flood light fittings of any makecomplete all as specified and directed. Make : Bajaj/surya/power palazzo/Philips/Wipro/Havells.
103	Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS cretifiedsuitable for 150 watts LED flood light fittings of any makecomplete all as specified and directed. Make : Bajaj/surya/power palazzo/Philips/Wipro/Havells.
104	Supply only LED Driver of similer wattage with operating voltage inputac 85- 300 volt , pf> .95 asper IS 15885 with inbuilt surge protectionof minimum 5 kvand BIS cretifiedsuitable for 200 watts LED flood light fittings of any makecomplete all as specified and directed. Make : Bajaj/surya/power palazzo/Philips/Wipro/Havells.
105	Supply and fixingstreet light bracket made out of 40 mm bore mild steel GI light grade tubing over all length 1.5 mtr bend to shape as directed including providing two Nos MS flat iron 40x6 mm clamp of appropriate size with nut bolts and washer duly painted with two coat of synthetic enamel paint over a coat of primer (GI surface shall not be painted) complete all as specified.
106	Supply and fixing lantren of dia 60 CMfor fixing of flood light,cap type to be fixed on the top of 9 m SP-31 / 11 m SP-55Steel pole , made of MS pip medium gradedia greater than the top dia of the pole of length 0.35 M supported by MS flat iron of size 50X6 mm 8 nosincluding two coat of aliminium painting over a coat of redoxide primer complete all as directed
107	S&F hot press moulded SMC junction/terminal box of size with internal diamensions of 300 x 200 x 1055 mm with hinged door, incl provision of 2 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixed on pole by means of clamps made out of MS flat iron of size 25mm x 3 mm 2 Setincluding dismantling of old unserviceable all as specified and as directed.
108	S&F PVC insulated unsheathed/sheathed cable with stranded Aluminium conductor 1100 Volts grade, flat twin core service cable of size 4 Sqmm conforming to IS:694/1990 with latest amendments ISI including disconnecting/taking out existing unsv/damaged old service cable complete all as specified and directed.Make : Richa/havells/fincab or equivalent as approved by GE.
109	All as per item No- 104 here in before but of size 6 Sqmm complete all as specified and directed.
110	All as per item No- 104 here in before but of size 2.5 Sqmm complete all as specified and directed
111	Material and Labour for drawing two runs ofPVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 2.50 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 1.50 sq mm including 20mm dia PVC conduitof dia 20 mm medium gradeexclusive of boxes but inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, clampsetc complete all as specified
112	Supply and lay PVC Insulated , PVCsheathed industrial HV round multicore flexible cablewithcopper conductorTHREE core 2.5 sqmm including PVC conduit 20mm dia medium grade and necessary bends, fittings and fixturesas required for connection of light fittings . ( USED FOR GARDEN LIGHT CONNECTION, EXCAVATION , RETUNING FILLIING ETC WILL BE MEASURED AND PAID SEPARATELY.
113	Supply and drawn sub main wiring with two runs of 6 Sq mm single core PVC insulated unsheathed cable upto and including 1100 volts grade with multistrandedcopper conductor drawn through and including non metalic PVC rigid conduit accessories surface type on walls, floors etc including one run of 4.0 Sqmm PVC insulated copper conductor for earth continuitywire all as specified (Note : Two runs of copper conductor and one run ofcopper earth wire including PVC conductor will be measured and paid as one unit only)
114	Supply and drawn sub main wiring with four runs of 10 Sq mm single core PVC insulated unsheathed cable upto and including 1100 volts grade with multistrandedcopper conductor drawn through and including non metalic PVC rigid conduit accessories surface type on walls, floors etc including two runs of 6.0 Sqmm PVC insulated copper conductor for earth continuitywire all as specified (Note : Four runs of copper conductor and one run ofcopper earth wire including PVC conductor will be measured and paid as one unit only)
115	Supply only of aluminium cable lugs of following sizes :-
116	16to 25 Sqmm Size
117	35to 50 Sqmm Size
118	70to 95 Sqmm Size
119	120to 150 Sqmm Size
120	185to 240 Sqmm Size.
121	Dismentling ofdamage / broken coping of PCC/ steel pole of any size and removing the debries from site complete all as specified and directed
122	Dismantling LT steel tubuler pole of any height by taking out from PCC foundation complete and shifting to other location as directed including fixing the pole in true vertical position including excavation and earth work, PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as base concrete and PCC 1:3:6 type C2 (using 20mm graded stone aggregate) in both foundation and coping of poles all as specified in SSR Part I-2009 and applying two coats of aluminium paint to pole surface complete all as directed by Engineer-in-Charge.
123	Material and labour for Taking down UNSV LED Lights and removing Carbon from its connector joints incl replacement of Connecting wire with new PVC sheated weatherproof 3 X single core cable for electrical connection and refixing the fittingafter repair to its original/New location or as directed by Engineer-in-charge.(connecting wire/Spares will be measured and paid separately only)
124	S&F On-Load changeover switch (In sheet steel enclosure), AC 21 (Side Handle), 4 pole of capacity 200 Amps, 415 Volts, 50 Hz, Conforms to HSN Code : 8536 complete all as specified and directed.Make : Standard or techno commercial equivalent mdolel in Havells/Benlo/L&T as approved by GE.
125	S&F On-Load changeover switch (In sheet steel enclosure), AC 23 (Side Handle), 4 pole of capacity 100 Amps, 415 Volts, 50 Hz, Conforms to HSN Code : 8536 complete all as specified and directed.Make : Standard or techno commercial equivalent mdolel in Havells/Benlo/L&T as approved by GE.
126	S&F On-Load changeover switch (In sheet steel enclosure), AC 23 (Side Handle), 4 pole of capacity 63 Amps, 415 Volts, 50 Hz, Conforms to HSN Code : 8536 complete all as specified and directed.Make : Standard or techno commercial equivalent mdolel in Havells/Benlo/L&T as approved by GE.
127	S & F MCCBboxFACTORY FABRICATED Powder coated Suitable for fixing at WALLincluding two set of clampscomprising with the following i) MCCB63 Amps 16 KA FP WITH BOTH SIDE SPREADER LINK. Make : L&T/ Havells / schneider/ legrand/C&S
128	S & F MCCBboxFACTORY FABRICATED Powder coated Suitable for fixing at WALLincluding two set of clampscomprising with the following i) MCCB100 Amps 16 KA FP WITH BOTH SIDE SPREADER LINK. Make : L&T/ Havells / schneider/ legrand/C&S
129	Supply and fixon wall with necessary arrangements busbar chamber 100 amps 4 way4 polewall mounted IP -31 , made out of 1.6 mmthick CRCA sheet epoxy powdwer coated single layer operational voltage 440 Volt , Short circuit current capacity 25 KA for 1 Secondincluding necessary cable connectionscompleteall as specified and directed.Note: Quoted rates inclusive of necessary fixing arrangement and cable connections , cable glands as required for proper fixing / functioning of Bus Bar Chamber.
130	Supply and fixon wall with necessary arrangements busbar chamber 200 amps 4 way4 polewall mounted IP -31 , made out of 1.6 mmthick CRCA sheet epoxy powdwer coated single layer operational voltage 440 Volt , Short circuit current capacity 25 KA for 1 Secondincluding necessary cable connectionscompleteall as specified and directed.Note: Quoted rates inclusive of necessary fixing arrangement and cable connections , cable glands as required for proper fixing / functioning of Bus Bar Chamber.
131	Supply and fix MCB DB SPN 4 waydouble door including MCB TPN 6 to 32 Amps 10 KA C Curve complete all as specified and directed
132	Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated, out door type,LT FEEDER PILLAR BOX made out of 3.15 mm thick CRCA Sheet of size 1MX.75mX.35M with projected Globe roof for rain water protection Dust and Vermin Proof ,Double door withboth side opening including Neoprene Rubber Gasket,, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embededwith 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level comp -lete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Testing after Installation complete all as specified and comprising of the following :–
133	(a) Aluminium bas bar 200amps - 04 Nos, supported with suitable size of heavy duty porcelin stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable PVC sleeving.The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral.(b) MCCB 100amps, 415 volt,16 KA Breaking capacity4 pole Electromagnetic releaseduly connected to Bus Bar AsINCOMING- 01 NosMake Legrand model no: 420015 or equivalent from Schinder/L&T/Hagar as approved by GE.
134	Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated, out door type, LT FEEDER PILLAR BOX made out of 3.15 mm thick CRCA Sheet of size 0.7MX0.75Mx0.35M with projected Globe roof for rain water protection Dust and Vermin Proof ,Double door withboth side opening including Neoprene Rubber Gasket,, suitable for 440 Volt 3 Phase 4 Wire System ,including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embededwith 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level comp -lete withinternal connection with suitable size of cable ,cable lugs,and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Testing after Installation complete all as specified and comprising of the following :–(a) Aluminium bas bar 200amps - 04 Nos, supported with suitable size of heavy duty porcelin stand lock with suitable sizeof brass nut, bolts and washer with heat shrinkable PVC sleeving.The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral.
135	Supply, installation, testing and commissioning of Surge protection device ( Type 1+2 , Metal oxide varistor ) suitable for installation at main incoming panel board of any Building / installation andcapability to discharge high current surge without any destruction of the installationwith the following specifications : (i) Maximum continuous operating voltage 440 Volt (ii) I imp in kA ( 10/350us wave) 12.5 (iii) I max in kA ( 8/20us wave) 80(iv) Three phase / 4 pole Note : Quoted rates inclusive of enclosureas required for proper installation and connection by using copper wire of suitable size of appx length 3 mtr , copper lugs etcMake : ABB model Number OVR T1-T2 3N 12.5 - 440s P QS or equivalent from legrand / Siemens as approved by GE.
136	Repair/rectification of leakages to water supply distribution lines 15 mm bore to 25 mm bore GI/PPR tubing with provision of necessary excavation,cutting of hard standing , returning and filling in as required, tightening of loose joints of union, elbow, sockets etc, threading if required including replacement of GI unions/sockets/nipples as required at site complete all as specified and directed.
137	Allas per item No 126 here in before but for GI tubing 40 mm bore to 50 mm bore
138	All as per item No 126 here-in-before but for GI tubing 80 mm bore to 100 mm bore.
139	Attending routine compaints of external water supply including rectification of minor defects by taking down of existing GI/PPR tubing up to 25 mm bore, cutting/threading and making joints and cleaning for any blockages, opening of float valve of service tanks, cleaning and fixing the same in its position, replacement of jumper valve/ packing sheet of gate valve and including replacement of GI unions/sockets/nipples etc as required at site complete all as specified and directed.
140	Allas per item No 129 here in before but for GI tubing 40 mm bore to 50 mm bore.
141	Attendingcompaints ofBLOCKAGE OF WATER PIPE LINES / NO WATER SUPPLYAT ANY kind of ACCOMODATION ( MARRIED / OTM/ single / multi storybuilding ), IDENTIFY THE FAULTSincluding rectificationby taking down of existing GI/PPR tubing up to 80mm bore, cutting/threading and making joints and cleaning for any blockages, opening of float valve of service tanks, cleaning and fixing the same in its position, replacement ofvalve/ packing sheet of gate valve and including replacement of GI unions/sockets/nipples etc as required at site TO RESTORE WATER SUPPLYcomplete all as specified and directed.
142	Notes for Sl item No 126 to 131 :-(a)The contractor will be alloted complaints at MES complaint cell on requirement basis on all working days including Sundays and holidays and sufficient tradesman / resources will be deployed by him/her for completion of day to day comaplaints within 12 hours from the time of reporting. Any delay beyond above mentioned time limit without intimation of genuine cause, penalties will be recovered twice of the quoted rate for each un-attended complaint. (b)A detailed log book of complaints with completion/non-completion remarks from users/MES will be maintained by the contractor and the same will be updated on daily basis in consulatation with JE E&M/Engineer-in-Charge. (c)The contractor will make suitable arrangment for emergency complaints and will notify authorised representive/Engineer-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint.In case of any dispute the decision of accepting officer will be final and binding in this regard.
143	(d)The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints.(e)The quoted rate is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Military station at Secunderabad.(f)The contractor will maintain location wise record of each spare/fittings utilized as per inventry format given by AGE E/M, Secunderabd and the same shall be submitted to E/M No IIstore yard on requirement basis.(g)The stationery required for the job work such as complaint slip books, gate pass book, job card and T&P shall be arranged and maintained by the contractor.(h) The cost of excavation / earth work above 1 CUM mesured and paid separately under relivent items . j) Contractor is responsible for repair/replacement of any damages to the existing structures, Under Ground HT/LT/OFC Cables etc during the course of execution.(k) Spares/GI fittings required to be replaced and shall be measured and paid separately under respective items.
144	Rectification of lekages in pumping /delivery lines(CI/DI/PPR/MS) of size 80 mm to 100 mmat Military area / Military Roads /civil Roads /PWD Roads /Cantt board roadsby taking necessary permission from respective authorities by excavating PCC/RCC/pavement/soft&hard soil/rock of any depthby using necessary T&P(Excavator/hammer drill)as per the requirement , De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI/ DIspecials such as collars, bends/tail peaces,any type of gasket , welding worketc as required to arrest the leakages completelyand making joints, filling the trenches , site clearences and PCC at the top portion as requiredcomplete all as specified and as directed. Note:-(i)CI specials, lead Joints, D-Joints, Clamp joints, DI/CI Pipe etc shall be measured and paid under respective items of sch \"A\". (ii) Excavation and PCC will be measured and paid separately under relivent items.(iii) rate of any kind of gasket and Lead joint , necessary barrication for safety of worker etc as required , deemed to be included in the quoted rate.(iii) rate of any kind of gasket and necessary barrication for safety of worker etc as required ,deemed to be included in the quoted rate.(iv) The contractor is responsible for obtaining the approval from Police Department for Traffic Diversion and related works if required in consultation with the MES deparatment if required.(v) Contractor is responsible for repair/replacement of any damages to the existing structures, Under Ground HT/LT/OFC Cables etc during the course of execution.
145	Rectification of lekages in pumping /delivery lines(MS/CI/DI/PPR) of size 150 mm to 400 mmat Military area / Military Roads /civil Roads /PWD Roads /Cantt board roads by taking necessary permission from respective authorities by excavating PCC/RCC/pavement/soft&hard soil/rock of any depthby using necessary T&P(Excavator/hammer drill)as per the requirement , De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI/ DIspecials such as collars, bends/tail peaces,any type of gasket , welding worketc as required to arrest the leakages completelyand making joints,filling the trenches , site clearences and PCC at the top portion as required complete all as specified and as directed. Note:-(i)CI specials, lead Joints, D-Joints, Clamp joints, DI/CI Pipe etc shall be measured and paid under respective items of sch \"A\". (ii) Excavation exceeding 2 CUM and PCC will be measured and paid separately under relivent items.(iii) rate of any kind of gasket and necessary barrication for safety of worker etc as required ,deemed to be included in the quoted rate.(iv) The contractor is responsible for obtaining the approval from Police Department for Traffic Diversion and related works if required in consultation with the MES deparatment if required.(v) Contractor is responsible for repair/replacement of any damages to the existing structures, Under Ground HT/LT/OFC Cables etc during the course of execution.
146	M&L for attending break down of water supply pipe line at Military area / Military Roads /civil Roads /PWD Roads /Cantt board roadsand repair s to CI/DI/PPR/MSwater mains of size 80 mm to 300 mm bore at a given notice including necessary excavation in mud, in any type of soil , PCC,RCC, hard rock etcby manual or using special T&P such as JCB etc.De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI specials such as collars, bends/tail peaces etc and making joints complete all as specified and as directed including making good of disturbed surfaces.Note:-(i)CI specials, lead Joints, D-Joints, Clamp joints, DI/CI Pipe etc shall be measured and paid under respective items of sch \"A\". (ii) Excavationand PCC will be measured and paid separately under relivent items.(iii) rate of any kind of gasket and necessary barrication for safety of worker etc as required ,deemed to be included in the quoted rate.(iv) The contractor is responsible for obtaining the approval from Police Department for Traffic Diversion and related works if required in consultation with the MES deparatment if required.(v) Contractor is responsible for repair/replacement of any damages to the existing structures, Under Ground HT/LT/OFC Cables etc during the course of execution.
147	Taking up or down steel tubing and connections, including cleaning the pipes free from scaling for for re-fixing or removal complete with all fittings and connections of the following sizes :-
148	15 mm dia
149	20 mm dia
150	25 mm dia
151	40 mm dia
152	50 mm dia
153	80 mm dia
154	100 mm dia
155	Refixing of old steel tubing and connection in new or old position including fittings with old/new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in trenches and testing for leakages complete all as specified and directed for the following sizes:-
156	15 mm dia
157	20 mm dia
158	25 mm dia
159	40 mm dia
160	50 mm dia
161	80 mm dia
162	100 mm dia
163	Notes for itemNo 136.01 to 136.07 :- (a) Excavation and Earth work shall be measured and paid separately.
164	Refixing of old steel tubing and connection in new or old position including fittings with old/new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in floors, walls and ceilings and testing for leakages complete all as specified and directed for the following sizes:-
165	15 mm dia
166	20 mm dia
167	25 mm dia
168	Supply and laying steel water tubing medium grade, galvanised with all fitting, laid in trenches and testing for leakages complete all as specified and directed for the following sizes:-
169	15 mm dia
170	20 mm dia
171	25 mm dia
172	40 mm dia
173	50 mm dia
174	80 mm dia
175	100 mm dia
176	Notes for itemNo 138.01 to 138.07 :- (a) Excavation and Earth work shall be measured and paid separately.
177	Supply and laying steel water tubing medium grade, galvanised, fixed to wall and ceilings or laid in floor and testing for leakages complete all as specified and directed for the following sizes:-Note : Fittings required shall be measured and paid separately.
178	15 mm dia
179	20 mm dia
180	25 mm dia
181	Taking up unserviceable/ defective CI/DI/MS water mains (including all fitting ) with spigot/ socketed / flanged ends including disconnecting pipes and fittingsin any position complete all as specified and directed for the following sizes:-
182	80 mm Dia
183	100 mm Dia
184	150 mm Dia
185	200 mm Dia
186	Refixing of old CI/DI/MS Pipe and connectionafter cleaning in new or old position including fittings with old/new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in trenches and testing for leakages complete all as specified and directed for the following sizes:-
187	80 mm dia
188	100 mm dia
189	150 mm dia
190	200 mm dia
191	Notes for itemNo 141.01 to 141.04 :- (a) Excavation and Earth work shall be measured and paid separately.
192	S&F ductile iron pressure pipes, class K7, centrifugally cast with spigot and socket ends as per following conforming to IS 8329/2000 with cement mortar lining inside the pipes with outside zinc coating suitable for push-on-joint (rubber gasket D jointing) inany length including DI specials as required at site confirming to IS 8329/2000 and all jointing materials and making good for disturbed surfaces of roads, path ways etc while laying the pipe line at site, site clearance for the route of pipe line, welding, cutting the existing CI/DI/MS pipe line of any size up to 400 mm dia for inserting branch connections etc complete all as specified and directed for the following sizes:-Notes:- (a)Quoted rates inclusive of Push on Joints/ D-Joints as required (b) The contractor is responsible for obtaining the approval from Police Department for Traffic Diversion and related works if required in consultation with the MES deparatment if required.(c) Contractor is responsible for repair/replacement of any damages to the existing structures, Under Ground HT/LT/OFC Cables etc during the course of execution.
193	100 mm Dia
194	150 mm Dia
195	200 mm Dia
196	Notes for itemNo 142.01 to 142.03 :- (a) Excavation and Earth work shall be measured and paid separately.
197	Cutting existing CI pipe line for insertion of new tees, collars for branch connections complete all as specified and directed for the following sizes:-Note: CI /DI specials, Joints and Earth work shall be measured and paid sperately under relevant items of this schedule.
198	80 mm Dia
199	100 mm Dia
200	150 mm Dia
201	200 mm Dia
202	S&F GI fittings 15 mm bore, medium grade, ISI marked, smooth finished and make embossed on fittings complete all as specified and directed for the following fittings:-
203	Union
204	All equal Tee
205	Socket
206	Nipple 75mm Long
207	Nipple 100mm Long
208	Elbow
209	Hex Nipple
210	All as per item No 144 here in before but for 20 mm bore.
211	Union
212	All equal Tee
213	Reducer Tee 20 x 20 x 15 mm
214	Socket
215	Reducer Socket 20 x 15 mm
216	Nipple 75mm Long
217	Reducer Elbow 20 x 15 mm
218	Elbow
219	Hex Nipple
220	All as per item No 144 here in before but for 25 mm bore.
221	Union
222	All equal Tee
223	Socket
224	Reducer Socket 25 x 20 mm
225	Reducer Socket 25 x 15 mm
226	Nipple 75mm Long
227	Elbow
228	Reducer tee 25mm x 25 mm x 20mm
229	Reducer tee 25mm x 25 mm x 15mm
230	Hex Nipple
231	All as per item No 144 here in before but for 40 mm bore.
232	Union
233	All equal Tee
234	Socket
235	Reducer Socket 40 x 25 mm
236	Nipple 75mm Long
237	Elbow
238	Reducer tee 40mm x 40mm x 25mm
239	Reducer tee 40mm x 40mm x 20mm
240	Hex Nipple
241	All as per item No 144 here in before but for 50 mm bore.
242	Union
243	All equal Tee
244	Socket
245	Nipple 75mm Long
246	Nipple 100mm Long
247	Nipple 150mm Long
248	Reducer 50mm x 40mm.
249	Reducer 50mm x 25mm.
250	Plug
251	Elbow
252	Reducer tee 50mm x 50 mm x 40mm
253	Reducer tee 50mm x 50 mm x 25mm
254	Hex Nipple
255	All as per item No 144 here in before but for 80 mm bore.
256	Union
257	All equal Tee
258	Socket
259	Reducer 80mm x 50mm.
260	Reducer 80mm x 40mm.
261	Nipple 75mm Long
262	Nipple 150mm Long
263	Elbow
264	Reducer tee 80mm x 80mm x 50mm
265	Reducer tee 80mm x 80mm x 40mm
266	Hex Nipple
267	All as per item No 144 here in before but for 100 mm bore.
268	Union
269	All equal Tee
270	Socket
271	Nipple 75mm Long
272	Nipple 100mm Long
273	Nipple 150mm Long
274	Elbow
275	Reducer tee 100mm x 100mm x 80mm
276	Reducer tee 100mm x 100mm x 50mm
277	Reducer tee 100mm x 100mm x 40mm
278	Supply and fix in replacement of unserviceable Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed for the following sizes:-
279	15mm dia bore
280	20mm dia bore
281	25mm dia bore
282	40mm dia bore
283	50mm dia bore
284	Supply and fix in replacement of unserviceableball brass valves, high pressure with polythene float and fly nut alongwith socket/reducer of suitable size, screwed for iron pipe or brass ferrule and fixedcomplete all as specified and directed for the following sizes:-
285	20mm dia bore
286	25mm dia bore
287	M&L for Arrestingleakages of sluice valves by replacing Gland packing, gland bush, gland falange, nutbolts, gasket, packing material as required after dismantling in existing positionincluding testingon completion complete all as specified and directed for the following sizes:-Note: Quoted rates inclusive of the materialsmentioned above like Gland packing, gland bush, gland falange, nutbolts, gasket, packing materia etc as required to arrest the leakages
288	80 mm Dia
289	100 mm Dia
290	150 mm Dia
291	200 mm Dia
292	S&F CI / DI specials such as bends (any type, radius or angle) tapers any type (Straight, bend, increase, decrease or double socket etc) tee pieces, single \"Y\" branch, double branch cross (all sockets, socket and spigots, collars, cap plugs etc up to 150 mm bore complete all as specified and directed.
293	All as per item No 154 here in before but for 200 mm bore to 300 mm bore.
294	Burning out lead joint in position for following sizes of CI/DI pipe, removing old lead complete all as specified and directed :-
295	80 mm Dia
296	100 mm Dia
297	150 mm Dia
298	200 mm Dia
299	M&L for run lead joint for CI pipe/DI pipe includingspun yarn etc for spigot and socket pipes and fittiings complete all as specified and directed for the following bore of pipes:-
300	80 mm Dia
301	100 mm Dia
302	150 mm Dia
303	200 mm Dia
304	S&F in repairs CAST IRON ORDUCTILE IRONMECHANICAL COUPLING / MECHANICALJOINT / D JOINTheavy duty INCLUDING ALL JOINTING MATERIAL , ISI marked, split type with long collar, suitable rubber rings, bolts, nuts and washers etc suitable for MS/CI/DI/GI /PVC pipes of following sizes AS REQUIRED FOR REPAIRING OF ANY KIND OF LEAKAGES COMPLETEall as specified and as directed:- Notes:- (a) Excavation and Earth work shall be measured and paid separately. (b) Quoted rate inclusive of cutting of any kind of pipesandall ITEMS as required for fixing and proper functioningofJoints. (c) Quoted rate is deemed to be inclusive of necessary T&P for cutting the pipe line, Pump sets for De-watering, JCB for Excavation (if required) etc and no extra payment shall be admissible on this account.
305	80 mm Dia
306	100 mm Dia
307	150 mm Dia
308	200 mm Dia
309	Sypply and fixing in replacementof DI D/F Gate valve (Soft Sealed) Resilient Seated Soft Sealing gate valves( Sluice valves Non RAISING TYPE) with body bonnet of ductile cast ironof grade GGG-40/SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per IS 3896 - Part 2- 1985 and subsequent revisions, Wedge fully rubber lined with EPDM Food grade quialityand Seals of NBR and the valve should be vacuum tight and 100 % leak proof with face to face dimention as per BS 5163-89/IS 14846-2000/DIN 3202 F 4. andValves should be electrostatic powder coating both inside and outside pocket less body passage class PN 1.6 including all jointing materials ( Gasket , Nutbolts ets)connecting and testing complete all as specified and directed. Note : OLD SERVICEABLE VALVES TO BE DEPOSITED TO the DEPARTMENT storeFOR FURTHER USE as directed by Engineer-In-Charge)
310	80 mm Dia
311	100 mm Dia
312	150 mm Dia
313	200 mm Dia
314	Sypply and fixing in replacementof DI D/F Gate valve (Soft Sealed) Resilient Seated Soft Sealing gate valves( Sluice valves RAISING TYPE) with body bonnet of ductile cast ironof grade GGG-40/SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per IS 3896 - Part 2- 1985 and subsequent revisions, Wedge fully rubber lined with EPDM Food grade quialityand Seals of NBR and the valve should be vacuum tight and 100 % leak proof with face to face dimention as per BS 5163-89/IS 14846-2000/DIN 3202 F 4. andValves should be electrostatic powder coating both inside and outside pocket less body passage class PN 1.6 including all jointing materials ( Gasket , Nutbolts ets)connecting and testing complete all as specified and directed. Note : OLD SERVICEABLE VALVES TO BE DEPOSITED TO the DEPARTMENT storeFOR FURTHER USE as directed by Engineer-In-Charge)
315	150 mm Dia
316	200 mm Dia
317	400 mm Dia
318	Cutting the existing road straight by manual, depth and width not less than 30 cm for pipes up to 100 mm dia and 60 cm for pipes from 150 mm to 150 mm dia and 75 cm for pipes above 250 mm dia and filling back with excavated soil up to 75 %road portion and 25 % shall be made with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate complete all as specified and directed.
319	M&L for Construction of new PCC solid Masonry valve chamber of size 1000 X 1000 X 1000 mm (Internal dimensions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 159 mm thick 159 mm wide off sets around over 100 mm thick hard core , 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally and 159 mm below GL externally & top of floor including excavation earth work in hard/Dense soil 5 mm thick MS sheet cover fixed on 59 mm X 59 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 59 m etc complete all as specified and directed.
320	M&L for replacement of cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including welding, bending cold or hot, drilling holes for hinged, in any shape or size as indicated for valve chamber top cover, 4 mm thick MS sheet cover fixed on 40 mm X 40 mm X 6 mm thick angle iron frame with locking arrangement, mild steel handle, and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.
321	M&L for road crossing/drain crossing by adopting trench less tunneling work through specified pipe jacking method by erecting the equipment to true to the allignment and gradient by haidrolic pipe jacking technique complete including tunneling, excavation in any type of soils including hard rock, TO CROSS WATER PIPE LINEUP TO200 mm diain any length including jointing materials and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned authorites complete all as specified and as directed incuding making good of distrubed surfaces.Note: Pipe will be measured and paid separately under relevant items.
322	Supply and lay Pipes MS black ERW Steel including specials having nominal dia 80 mm of thickness 6.0 mm as per IS 3589 - 2001, Grade - 330 with plain ends and specials by welding, leak testing of line laid in trenches / floors/ walls/ducts completeall as specified and directed.Note: Quoted rate is inclusive of supply andfixing of flange of suitable size as required, bends welding and cutting etc as required for fixing of pipe .
323	All as per Item No. 165 here in before but for 100 mm dia
324	All as per Item No. 165 here in before but for 150 mm dia
325	All as per Item No. 165 here in before but for 212 mm dia
326	Supply and replace single phase preventor cum low level water guard suitable for 4 to 7.5 HP submersiblepump set complete all as directed by Engineer-in-Charge.
327	Supply and replaceDOL starter suitable for5/ 7.5 HP motor, 5.5 KW & relay max range 20-32 Amps for submersible pump set of 3 phase including necessary internal wiring with suitable copper wire including testing and commissioning complete all as directed by Engineer-in-Charge. Make L&T cat part No CS90947 or equivalent of Havells /CG as approved by GE.
328	Taking out unserviceable GI socket from 50 mm column pipe and S&F new GI socket 50mm (ISI marked) long type, heavy dutysuitable for the column pipe complete all as directed by Engineer-in-Charge.
329	Cutting the existing damaged threading of GI column pipe 50 mm dia andre-threading on lathe machine complete all as directed by Engineer-in-Charge.
330	Removing old unserviceable column pipe as obtained from lowering of submersible pump setand S&F new GI column pipe 50mm dia, heavy duty, ISI marked, including fittings (Long socket), both ends machine threaded with long threaded socket complete all as directed by Engineer-in-Charger.
331	Removing unserviceable PVC water proof cable of any size as obtained from lowering of submersible pump setand S&F new PVC water proof copper cable of size 3 core 2.5 sqmm suitable for submersible pump set complete all as directed by Engineer-in-Charge.
332	M&L for cable jointfor water proof cable of 3 core 2.5 /4.0sqmm flat copper cable including testing and commissioning complete all as directed by Engineer-in-Charge.
333	Removing unserviceable PVC water proof cable of any size as obtained from lowering of submersible pump setand S&F new PVC water proof copper cable of size 3 core 4.0sqmm suitable for submersible pump set complete all as directed by Engineer-in-Charge.
334	M&L for cable jointfor water proof cable of 3 core 4.0 sqmm flat copper cable including testing and commissioning complete all as directed by Engineer-in-Charge.
335	M&L for heavy duty PVC casing pipe of size 150 mm for bore well complete all specified and directed.
336	S&F Borewell casingcover 200 to 300 mm
337	Supply & fix steel wire rope anti corrosion (SS) of cage 6 mm thickness for fixing submersible pumps including necessary nuts, bolts & clamps all as specified and directed by Engineer-in-charge.
338	Core cutting / drillingof Bldg Roof / Wall for passing of GI Pipe up to 40 mm dia incuding necessary mechinaries complete all as specified and directed
339	M&L for flushingof existing borewells of any sizeupto 150 Mtrs depth with drilling compressor mounted on truckincluding surging and flushing the bore at a pressure of 7 Kg / Sqcm with compressed air andflushing the sand, mud including flushing out tree roots etc from the bore well till discharge of the fresh water including testing of watersamples for chemical and bacteriological tests andcomplete all as specified and directed .
340	Disconnecting and removing the water and electric connections carefully from the existing submersible pump sets of capacity 3 HP to 10 HP and taking out the pump setalongwith pipes and fittings for flushing the bore wellupto 450 feet depth orrepair the pump set and strip opening the pump set for repairs/replacement of worn out spares, refixing of serviceable spares, assembling the pump set completely, testing of pump set, lowering the pump set inside the bore well after repairs including connecting back the water and electric connections, commissioning of pump set for satisfactory operation on its full load complete all as specified and directed. Note :-The spares required for repair the pump sets and rewinding of motors will be measured and paid separately.
341	Disconnecting and removing the water and electric connections carefully from the existing submersible pump sets of capacity 5 HP to 10 HP and taking out the pump setalongwith pipes and fittings for flushing the bore wellabove450 feet and upto 750 feet depthorrepair the pump set and strip opening the pump set for repairs/replacement of worn out spares, refixing of serviceable spares, assembling the pump set completely, testing of pump set, lowering the pump set inside the bore well after repairs including connecting back the water and electric connections, commissioning of pump set for satisfactory operation on its full load complete all as specified and directed. Note :-The spares required for repair the pump sets and rewinding of motors will be measured and paid separately.
342	M&L for rewinding the Submersible pump Motorwith PVC insulated,super enamelled copper conductor with ‘F’ class heavy grade insulation weight and turns to achieve its full efficiency inclduing tying the winding and connecting the coils and brining the connections as that of exisitng one including applying insulating varnish, heating and backing the windings thoroughlyincluding taking down old existing copper winding complete all as specified and directed for Submersible pump motor of following capacity :-
343	Submersible Motor upto and including5 HP.
344	Submersible Motor above 5 HP up to 10 HP.
345	Supply only the following spares suitable for existing make of submersible/centrifugal pump set 3 to 10 HP capacity, multi stage for repairs complete all as specified and directed :-
346	Gun metal Impeller.
347	Stage casing.
348	SS Sleeves.
349	Middle bush.(LB)
350	Middle sleeve.
351	Discharge outlet.(LB)
352	Pump coupling.
353	DOL SS Sleeve.
354	Suction bush.
355	Pump Shaft
356	Supply only the following spares for repairs of centrifugal / monoblock pump set of up to 25 HP capacity complete all as specified and directed :-
357	Ball bearing
358	GM bush.
359	CI impeller.
360	MS pump shaft.
361	Gland cover.
362	Dismantling and strip opening the centrifugal/ monoblockpump/motor including disconnecting the suction, delivery, vaccum pipe lines and coupling for repairs to pump and refixing the same after repairs including overhauling the pump set, renewal of gasket to pump suction and delivery lines, gland packing, greasing nuts, bolts and washers,Metal Sleeves, painting ,all kind of grinding & welding work, replacement of bearing, etc as required for arresting any kind of water leakagesincluding testing and commissioning complete all as specified and directed for the following capacities as mentioned below :
363	Pump 3 phase 7.5 HP capacity.
364	Pump 3 phase 3 to5 HP capacity.
365	Notes for item Nos 188.01 to 188.02:-(i)The rate considered is inclusive of tools and plants including transportation of pump set from site to workshop and back required for carrying out the repairs.(ii)The rate considered is inclusive of cost towards miscellaneous items such as cotton waste, grease, Gland packing, nut bolts , all kind of grinding, weldingwork , gasketand otherminor consumables. The cost of other spares for pump measured and paidseparately under appropriate items.(iii)The rate considered is inclusive of checking of alignment of pump with dial gauge after refitting.(iv)The cost of spares for pumpnot mentioned above will be considered separately under appropriate items.
366	M&L for rewinding the centifugal/ Monoblockelectric motor startor or rotorwith PVC insulated,super enamelled copper conductor with ‘F’ class heavy grade insulation weight and turns to achieve its full efficiency inclduing tying the winding and connecting the coils and brining the connections as that of exisitng one including applying insulating varnish, heating and backing the windings thoroughlyincluding taking down old existing copper winding complete all as specified and directed of following capacities :-
367	Startor Winding of Electric Motor,7.5 HP capacity.
368	Startor Winding of Electric Motor, 5 HP capacity.
369	Supply and installation CPRI approved pump starter electric control panel board, for indoor use, DOUBLEdoor ( BOTH DOOR HAVING LOCKING ARRANGEMENT INCLUDING 2 NOS GODREJ 7 LIVER LOCK) dust & vermin proof floor mounted made out of CRCA steel sheet of 2 mm thick angle iron legs of size 50 x 50 x 5 mm, having electrolytic high conductivity insulated bus bar made out of aluminium strips of rating 100 Amps for 3 phase, 415 Volts, 50 C/S 4 wire system, with cable enty jprovision, with suitable lugs gland, voltmeter, Ammeter and phase indicator complete, duly painted with two coats of stove enameled power coated paint over a coat of red oxide primer complete all as including necessary PCC work of height 300 cm from the ground level including disconnecting/taking out old existing unsv pump panel complete all as specified and directed of the following( Leg of the panel should not be less than 0.75 M and size of the panel should not be less than 70CmX70CMX30CM)):-
370	INCOMMING :-(a)MCCB, 4 pole, 415 Volt, 40 Amps, 16 KA - 01 No(b)3 Phase LED Voltmeter, class - 0.5 - 01 No(c)3 Phase LED Ammeter, class -0.5 - 01 No(d)LED Indicator lamp in three colour RYB - 01 SetOUTGOING :-(a)MCCB, 3 pole, 10 KA \"C\" Curve 415 volts, 25Amps -02 No(b) DOL starter in sheet enclosure type MK-1, Motar rating AC-3 duty, 415 volts, 50 Hz suitable FOR 7.5 HP relay max rang 15-25 Amps-02 No.(c) Single phase preventor realy type Sz% (6wire), 415 volts -01 No
371	Supply and installation CPRI approved pump starter electric control panel board, for out door use, DOUBLEdoor ( BOTH DOOR HAVING LOCKING ARRANGEMENT INCLUDING 2 NOS GODREJ 7 LIVER LOCK) dust & vermin proof floor mounted made out of CRCA steel sheet of 3.15 mm thick angle iron legs of size50x50x5mm, having electrolytic high conductivity insulated bus bar made out of aluminium strips of rating 100 Amps for 3 phase, 415 Volts, 50 C/S 4 wire system, with cable enty jprovision, with suitable lugs gland, voltmeter, Ammeter and phase indicator complete, duly painted with two coats of stove enameled power coated paint over a coat of red oxide primer complete all as including necessary PCC work of height 300 cm from the ground level including disconnecting/taking out old existing unsv pump panel complete all as specified and directed of the following( Leg of the panel should not be less than 0.75 M and size of the panel should not be less than 70CmX60CMX30CM)):-
372	INCOMMING :-(a)MCCB, 4 pole, 415 Volt, 40 Amps, 16 KA - 01 No(b)3 Phase LED Voltmeter, class - 0.5 - 01 No(c)3 Phase LED Ammeter, class -0.5 - 01 No(d)LED Indicator lamp in three colour RYB - 01 SetOUTGOING :-(a)MCCB, 3 pole, 10 KA \"C\" Curve 415 volts, 32 Amps -01 No(b) DOL starter in sheet enclosure type MK-1, Motar rating AC-3 duty, 415 volts, 50 Hz suitable FOR 7.5 HP relay max rang 15-25 Amps-01 No.(c) Single hase preventor realy type Sz% (6wire), 415 volts -01 No
373	Material labour for removing submerceable pump motor set of capacity up to 10 HP stuck in side the borewell of depth up to 200 meter by flushing the exixting borewells of any size with drillingCompressuremounted on truck at a pressure of 7 Kg/ Sqcm with compressed air and flushingthe sand, mud including flushing out tree roots etc from the bore well till removing of the stuck motor and then clear the bore by using rod drilling using bore well drilling machine from any kind of obstruction, reinstall the motor and coloumn pipe, necessary electric connection and testing complete all as directed and specified.Note; rate quoted by the contractor inclusive of flushing by using suitable compressure, rod drilling for cleaning of bore well, removing the submerceable pump set stuck inside the bore well and reinstall the same after repair including removing and refixing of coloumn pipe , casing pipe, electrical connections, testing ets as required.
374	Supply and fixMCB SP&N 32 Amps 10 KA C Curve . Make L&T model BB20320C /Legrand/havells as approved by GE.
375	Supply and fixMCB SP&N 25 Amps 10 KA C Curve . Make L&T model BB20325C/Legrand/havells as approved by GE.
376	Supply and fixMCB SP&N 20 Amps 10 KA C Curve . Make L&T model BB20200C/Legrand/havells as approved by GE.
377	Supply and fixMCB TP&N 20 Amps 10 KA C Curve . Make L&T model BB40200C/Legrand/havells as approved by GE.
378	Supply and fixMCB TP&N 32 Amps 10 KA C Curve . Make L&T model BB40320C/Legrand/havells as approved by GE.
379	Supply and fixMCB TP 20 Amps 10 KA C Curve . Make L&T model BB30200C/Legrand/havells as approved by GE.
380	Supply and fixMCB TP32 Amps 10 KA C Curve . Make L&T model BB30320C/Legrand/havells as approved by GE
381	Supply only Bleaching powder Grade-I, IS 1065:1989(used in drinking water), stable dry free flowing white in appearance without hard lumps and visible impurities in laminated high density polythene bags of 25 Kgs capacityof each bags. Make : ADITYA BIRLA CHEMICALS LTD (DC) /RAMCO/GRASIM/DCM
382	Supply only Calcium Hypochlorite calcium based high strength granular chlorine having 65 % - 70 % chlorine content packed in 45 Kgs PVC sealed container, superior quality suitable for treatment of drinking water( Much more stable than chlorine gas, bleaching power and sodium hypochlorite) all as specified and directed. NOTE :- Approval of chemical (calcium hypochlorite) shall be given after verifaction of test certificates of chemical of various manufactures and other factores like chemical and safety and health hazard aspects of usage of chlorination . Make of the chlorination of chemical must be stated in production of certificate duly certified by govt laboratory conforming compliance of specification suitable for drinking water with a declartion from the laboratory that from the technical strengh stability health safety and operation point of view , this product is used for drinking water applications for consumption by humans and the brand/make of calcium hypochlorite is suitable for drinking water chlorination and its sample has been tested by Govt Laboratory. Traditional means of chemical shall be used subject to fulfil the parameters specified in the manual on water supply and treatment (Third edition May 1999) issued by Central Public Health and Environmental Engineering Organisation (CPHEEO), Ministry of Urban Development New Delhi. The contractor shall produce manufacturers \"Certificate of Compliance\" indicating date of manufacturer in original alongwith every consignment of supply. Test certificate from Govt approved Test Laboratory shall accompany with every consignment of supply to ensure that the materials supplied are in with conformity with relevant IS.
383	Notes for item No 200 to 201 :-(i) Contractor shall supply material as per monthly requirement basis in bags/containers as and when directed by Engineer-in-Chargeat various installation of AGE E/M No-II.(ii)The quoted rateis deemed to be included complete labour and transportation for the materials at various installations of AGE E/M No II with out any extra cost.
384	Advance Maintenance Free G.I. SAFE EARTHINGElectrodewith PIPEof not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meterlength, The electrode should be ofgalvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compoundto provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification .GI Electrode Shall be tested from CPRI.The earting pit should be cover with pcc(1:2:4 , B1) cover ,of450 x 450 mm complete all as specified and directed
385	Servicening / periodical checking of Starter panel board suitable for 5 HP to 10 HP Motor by replacing all unserviceable parts , checking for any kind of loose contact , identification of fault etc complete all as specifed and directed . Note : All spare to be replaced and measured under relivent items.
386	Servicing of Submersible pump motor set of capacity up to 10 HPcompleteall as directed
387	Attending Breakdown of any capacity any type ( Submerceable, Monoblock, Cetrifugal etc) ofPUMP SETS , Starter panel by Technitian and Helper for checking all parts and rectify the faults and give reports to concern JE as directed by Engineer-In-Charge Note : All spare parts to be replaced and paid against respective items.
388	Arresting lekages from pumps of motor capacity 05 HP to 25 HP by replacing gasket, nutbolts, gland packing etc as required complete all as directed Note: Rate quoted by the contractor inclusive of all items as requiree to arrest the leakages from pumps
389	M&L for Painting of centrigfugal pumpset of capacity up to 10 HP complete in all arespect including ite inlet and outlets pipes , valves , base frame complete with synthetic enamelled spray painting complete all as directed
390	S&F, connecting and testing in repair of Cast Iron foot Valves flanged ends swing type operation with rubber seat as per IS : 4038 single disc with all standard accessories and tested including replacement of nuts, bolts, washers, gaskets, packings etc complete all as specified and directed.
391	50 mm Dia
392	65 mm Dia

Also Visit

Tenders

Telangana Tenders

Electrical Industry Tenders

Electric Panel Tenders

Electrical Panel Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair / Renewal And Day To Day Maintenance Of Lt Oh Line, Lt Ug Cable, Lt Panel, Street Lights, Water Supply Distribution System, Replacement Of Control Valve, Valve Points, Leak Proof Valves, Water Testing And Allied Works At Cda / D, Secunderabad-Telangana

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair / Renewal And Day To Day Maintenance Of Lt Oh Line, Lt Ug Cable, Lt Panel, Street Lights, Water Supply Distribution System, Replacement Of Control Valve, Valve Points, Leak Proof Valves, Water Testing And Allied Works At Cda / D, Secunderabad-Telangana

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us