Military Engineer Services-MES has published Tender For Repair / Maintenance Of Pumps, Motors, Starters, Control Panel, Relay, Filteration Plant And Misc Items At Bhalra Under Ge (I) 873 Ews. Submission Date for this Tender is 15-02-2023. Cleaning and Disinfecting Solutions Tenders in bhaderwah Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 03-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-02-2023 |
2 | 10-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-02-2023 |
Sl. No. | Item Description |
1 | Material and labour for taking out Centrifugal Pump of capacity40 HP, transportation of same from site to workshop and back,dismantling of cable / pipe connection and reinstallation of pump set after repair on the existing foundation and making electrical connections complete all as specified and directed.Note : All spares parts required will be measured and paid for separately |
2 | Supply only MS tyre coupling suitable size 40 HP Centrifugal pump setincluding making necessary machining work like, boring, key way and key etc., work required at site in the delivery pipe lines |
3 | Supply only Ball BearingMake : SKF |
4 | Supply only CI Bearing Housing |
5 | Supply only Water Seal 50mm x 68mm x 10mm |
6 | Supply only Packing Sheet |
7 | Supply only "O" Ring Set |
8 | Supply only Pump Shaft SS AISI-410 |
9 | Supply only SS Nut Bolt & Washer of 10mm dia |
10 | Supply only Grease |
11 | Supply only Graphite Gland Dori |
12 | Material and labour for taking out Motor Set of capacity 40 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections complete all as specified and directed. Note : All spares parts required shall be measured and paid for separately |
13 | Material and labour for rewinding of damaged / burnt motor of capacity 40 HP any type by using enamelled copper wire of superior quality of existing grade and same Nos. of turns including varnishing ‘F’ class insulation and drying in heat chamber / Oven including all other material / fittings and testing on completion, complete all as specified and directed. |
14 | Ball Bearing for 40 HP capacity motor front side |
15 | Ball Bearing for 40 HP capacity motor back side |
16 | Mechanical Seal for 40 HP capacity motor |
17 | Rubber washer Kit for 40 HP capacity motor |
18 | Bush cover for 40 HP capacity motor |
19 | Packing sheet for 40 HP capacity motor |
20 | Circlips Clamp for 40 HP capacity motor |
21 | Material and labour for taking out Monoblock pump-Motor Set of capacity 10 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections complete all as specified and directed. Note : All spares parts required shall be measured and paid for separately |
22 | Ball Bearing for 10 HP capacity motor front side |
23 | Ball Bearing for 10 HP capacity motor back side |
24 | Mechanical Seal for 10 HP capacity motor |
25 | Rubber washer for 10 HP capacity motor |
26 | Bush cover for 10 HP capacity motor |
27 | Packing sheet for 10 HP capacity motor |
28 | Circlips Clamp for 10 HP capacity motor |
29 | PVC Motor cooling Fan of suitable size |
30 | Gun Metal impeller of suitable size |
31 | Material and Labour for disconnecting of20/15 HP Submersible Pump Set motor kit from inside the Water Supply Sump from the delivery pipe for repair / rewinding, lifting, transportation to approved workshop for repair / rewinding with super enamalled copper winding wire of suitable size, insulation material i.e PVC copper cable lead, glass fibre sleeves, cotton tape, insulation paper, varnish and bearing grease etc., & reassembling of motor after rewinding and fixing the same at its original position with and including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed. |
32 | Submersible flat cable PVC insulated and PVC sheathed LT 1100 volts grade with copper conductor of size 10 Sqmm 3 Core, complete all as specified and directed. Make : Havells / Finolex / Polycab / Plaza / Asian |
33 | Submersible flat cable PVC insulated and PVC sheathed LT 1100 volts grade with copper conductor of size 25 Sqmm 3 Core, complete all as specified and directed. Make : Havells / Finolex / Polycab / Plaza / Asian |
34 | Supply & filling alumina ferric (Grade-4) suitable for purification of drinking water solid water in the form of solid lumps/slabs from the manufacturer having valid BIS certificate as specified in table 1 of IS : 299-2012 complete all as specified and as directed by Engr-in-charge. Make approved by E-in-C/Command HQ. Note : (i)Each consignment of alum supplied by the contractor should have a marking indicating weight of the slab and the alum supplied by the contractor shall be got tested for each lot from Govt reputed lab. The charge for testing shall be borne by the contractor and cost of the same shall be deemed to be included in the rate quoted.The contractor shall deliver the material as per site requirement and as per direction of Engineer-in-charge.(ii) The material will be supplied in bulk and should have fully information on card with each lot as:- (a)Name & grade of material (b) Mass of material in package(c) Name of manufacturer and trade mark.(d)Date of manufacturing (e)Batch No. |
35 | Supply & filling Calcium Hypo chlorite (chlorination chemical) high efficient (calcium hypo chlorite having 65% to 70% available chlorine) calcium based in granular form and should not have sodium/Iron/Mercury or other heavy metal contaminants complete all as specified and directed by Engr-in-charge. Note :- 1 The contractor has to produce test certificate from manufacturer’s (OEM) or reputed approved lab.2.The calcium based granular disinfectant shall be brought at site in sealed container of appropriate capacity duly marked with date of manufacturing and batch No, expiry date etc. |
36 | Supply and filling bleaching powder stable Gde-I conforming to IS specifications 1665/89 (Second revision) minimum available chlorine percentage lay mass 34% +1% in 25kg polyethene HDPE bags duly marked date of manufacturing and batch no of fresh lot complete all as specified and as directed by Engr-in-charge. Make approved by E-in-C/Command HQ |
37 | Star Delta Starter automatic controlled, Three Phase, 440 volts including push button for start and stop suitable for 40 HP motor having accessoriessuch as contactor, relay, start and stop button including making necessary connections, complete including taking down old unserviceable Star Delta Starter all as specified and directed. Make : Legrand / Siemens / Havells / BCH. |
38 | DOL starter suitable for upto 20/15 HP capacity electric motor, complete including taking down old unserviceable Starter all as specified and as directed. Make : L&T / Havells / Legrand / ABB |
39 | Stainless Steel (SS)Sluice Valve class PN-1, PD short body conforming to IS:14846-2000,heavy duty, both ends flangedwith stainless steel spindle & check nut,operating wheel, all nuts, bolts, washers, gaskets etc. of following description, including dismantling of old unserviceable Sluice Valve, complete all as specified & directed. |
40 | 200 mm bore |
41 | 150 mm bore |
42 | Stainless Steel (SS) Non Return Valve without by-pass arrangement, swing type, confirming to IS:5312, flanged ends, all nuts, bolts, washers, gaskets etc. of following description, including dismantling of old unserviceable NRV, complete all as specified and directed. Make : Advance / Bir /Leader / Sant. RAMCO |
43 | 200 mm bore |
44 | 150 mm bore |
45 | Cast Iron Butterfly Valveflanged type 100 mm bore with drilled flanged end heavy duty all as per IS : 4038 complete all as specified and directed. |
46 | Cast Iron Butterfly Valveflanged type 80 mm bore with drilled flanged end heavy duty all as per IS : 4038 complete all as specified and directed. |
47 | Cast Iron strainer flanged type 100 mm bore with drilled flanged end heavy duty all as per IS : 4038 complete all as specified and directed. |
48 | Cast Iron Foot Valveflanged type 150 mm bore with drilled flanged end all as per IS : 4038 with Cast Iron Strainer complete all as specified and directed. |
49 | Cast Iron Foot Valveflanged type 100 mm bore with drilled flanged end all as per IS : 4038 with Cast Iron Strainer complete all as specified and directed. |
50 | Cast Iron Air release valve with air outlets, conforming to IS-14845 of size 50mm bore and fixing up in cast iron water supply mains of size 50 mm dia including dismantling of old unserviceable air release valve complete all as specified and directed. Make : Advance / Bir /Leader / Sant. RAMCO |
51 | Cast Iron Sluice Valve class PN-1.6 PN short body conforming to IS:14846-2000,heavy duty, both ends flangedwith stainless steel spindle & check nut, CI operating wheel, all nuts, bolts, washers, gaskets etc. of the following description, including dismantling of old unserviceable Sluice Valve, complete all as specified & directed. Make : Advance / Bir /Leader / Sant. RAMCO |
52 | (a) 200 mm bore |
53 | (b) 150 mm bore |
54 | (c) 100 mm bore |
55 | (d) 80 mm bore |
56 | MCCB 200 Amps, breaking capacity 36 KA, FP, 415V (adjustable thermal and magnetic release) including taking down old unserviceable MCCB complete all as specified and directed. |
57 | MCCB 160 Amps, breaking capacity 36 KA, FP, 415V (adjustable thermal and magnetic release) including taking down old unserviceable MCCB complete all as specified and directed. |
58 | ON LOAD Change Over Switch 415 volt in sheet metal enclosure Four Pole of capacity 100 Amps complete all as specified and directed |
59 | Earthing complete with GI earth plate electrode ofsize 600mm x 600mm x 6mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.65 Mtr below normal ground level connected to GI strip 32 x 6 mm size and earthing lead protected with 50 mm bore GI pipe, light grade, filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 mtr and and including test point made out of 40x3mm GI flat, connected to GI strip by means of GI nuts, bolts and washers strip connected to earth plate including chamber PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate in concrete pit pre-cast RCC 40 mm thickreinforced with 6 mm diaround at 75 mm C/C both way with 12 mm dia mild steel plain bar lifting handle 2 Nos funnel with wire mesh 20 mm dia GI pipe light gradewatering pipe and frame work complete all as shown in electrical plate No. 3 of SSR Part-I2009 including testing on completion complete all as specified and directed. |
60 | Earthing complete with GI earth plate electrode ofsize 600mm x 600mm x 6mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.65 Mtr below normal ground level connected to GI strip 25x4 mm size and earthing lead protected with 40 mm bore GI pipe, light grade, filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 mtr and and including test point made out of 40x3mm GI flat, connected to GI strip by means of GI nuts, bolts and washers strip connected to earth plate including chamber PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate in concrete pit pre-cast RCC 40 mm thickreinforced with 6 mm diaround at 75 mm C/C both way with 12 mm dia mild steel plain bar lifting handle 2 Nos funnel with wire mesh 20 mm dia GI pipe light gradewatering pipe and frame work complete all as shown in electrical plate No. 3 of SSR Part-I2009 including testing on completion complete all as specified and directed. |
61 | Supply, laying, jointing and testing Mild steel ERW pipes having minimum 5.4 mm wall thickness confirming to IS : 1239-2004 amended upto date in any length of following description, complete all as pecified and as directed. Make : TATA / Jindal / Prakash / Swastik |
62 | 400 mm bore |
63 | 200 mm bore |
64 | 150 mm bore |
65 | Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out, complete all as specified and as directed. |
66 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
67 | Removing excavated soilsnot exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed. |
68 | Supply and fixing Gun metal globe / gate valve ISI Marked with and including jointing meterial and taking out old unserviceable valves complete all as specified and directed of following sizes :- Make : Advance / Bir / Leader / Sant |
69 | 50 mm bore |
70 | 40 mm bore |
71 | 25 mm bore |
72 | Testing of drinking water analysis report of physico-chemical and micro biological analyzing with following parameters :- (i) Temperature (ii) Ph value (iii) Taste (iv) Turbidity (v) Odour (vi)Total hardness CACO3(vii) Colour (viii) Zinc (ix) Lead (x)Cyanide (xi) Chloride (xii) Fluoride (xiii)Ammonia (xiv) Nitrate (xv) TDS (xvi)Phenolic compound (xvii) Residue free chlorineNote :- (i) The sample will be obtained him self/rep of contractor in presence of JE E/M or Engr-in-charge from site(ii) The test report will be obtained from a authorized as per IS-10500-2012 |
73 | Material and labour for lagging to 200mm dia pipes used in internal/external water supply pipe lines all round with, 25 mm thick bonded mineral wool performed "SPAPON" pipe sections of density 144 Kg/Cum conforming to IS- 9842 complete all as specified and directed. |
74 | Ditto all as per item no. 32 here-in-before but 100mm dia |
75 | Ditto all as per item no. 32 here-in-before but any dia header |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail