|
| 1 | M&L for servicing of both (indoor & outdoor) unit of split type ACs of capacity 1.5/ 2.0TR by cleaning filters, removing internal dust by using vaccum cleaner and air blower, oiling & greasing wherever required and checking for proper cooling complete all as specified and directed.Note:-(i) All tools and machinary required deemed to be included in quoted rates including servicing kit for indoor and outdoor unit with air compressor and servicing pump for removal of any foreign material from indoor/outdoor unit all as specified and directed by Engr-in-charge. |
| 2 | M&L for taking down window type AC 1.5 TR & 2 TR capacity for servicing,cleaning the inner side of air conditioners with the help of air blower, taking out the blower motor and re-fitting the same after washing with kerosene oil and oiling, repair of the unserviceable bushes, cleaning the condenser thoroughly with water and MAIC-DS solution with the help of wire brush, repair of the air filter, testing after complete servicing to the entire satisfaction of Engineer-in-Charge and refixing in same position complete all as specified and directed. |
| 3 | M&L for writing of SM/MES No etc as sample given by on window AC with the help of stencil with synthetic enamel paint complete all as specified and directed. |
| 4 | M&L for writing of SM/MES No etc as sample given by on Split AC with the help of stencil with synthetic enamel paint complete all as specified and directed. |
| 5 | Supply and fixed in repair, starting capacitor of 2.25/3.15 mfd suitable for blower motor of split type ACs of capacity 1.5/ 2.0TR complete all as specified and directed. Make:-Texla/ Asian/ Keltron/ Unistar/ Sarada/ Syscap as approved by GE. |
| 6 | Supply and fix in repair, over load protector suitable for window type ACs of capacity 1.5/ 2.0TR including connections complete all as specified and directed. Make:- Renutrol/ Shri Ram/ Denfoss/ LG as approved by GE. |
| 7 | Supply and fix in repair, selector/ rotary switch with knob 30 Amps, 250 volts complete all as specified and directed. Make:AGI model 254 B or equivalent model of other make as approved by GE. |
| 8 | Supply and fix in repair, starting capacitor 100-120mfd, 275 volts suitable for ACs of capacity 1.5/ 2.0TR and making connections with & including PVC insulated copper wire and thimbles complete all as specified and directed.Make:-Texla/ Asian/ Keltron/ Unistar/ Sarada/ Syscap as approved by GE. |
| 9 | Supply and fix in repair, starting capacitor 80-100mfd, 230 volts suitable for ACs of capacity 1.5 TR and making connections with & including PVC insulated copper wire and thimbles complete all as specified and directed.Make:-Texla/ Asian/ Keltron/ Unistar/ Sarada/ Syscap as approved by GE. |
| 10 | Supply and fix in repair, running capacitor of capacity 50+6mfd, 230 volts suitable for ACs and making connections with & including PVC insulated copper wire and thimbles complete all as specified and directed.Make:-Texla/ Asian/ Keltron/ Unistar/ Sarada/ Syscap as approved by GE. |
| 11 | Supply and fix in repair, starting relays suitable for compressors of window type ACs of capacity 1.5/ 2.0TRincluding connections complete all as specified and directed.Make:- Kirloskar/Renulator/ Denfoss as approved by GE. |
| 12 | M&L for rewiring (wiring kit) of window type air conditioners of capacity 1.5/ 2.0TR with using best quality PVC insulated copper conductor cable including thimbles sleaves of suitable size & shape complete all as specified and directed.Make of wire:-Plaza/ Havells/ Paragon/ Finolex as approved by GE. |
| 13 | Supply and fix in repair, thermostat switch suitable for window type ACs of capacity 1.5/ 2.0TR including necessary connection with and includingsuitable size of PVC copper conductor cable and thimbles sleeves of suitable shape & size complete all as specified and directed.Make:- Renutrol/ Indofoss/ Denfoss/ LG as approved by GE. |
| 14 | Supply and fixed in repair, prescribed control board panel (PCB)of existing make/ model suitable for window ACs of capacity 1.5/2.0TR complete all as specified and directed.Make:- Blue Star/ Voltas/ Carrier as approved by GE. |
| 15 | Supply and fixed in repair, prescribed control board panel (PCB)of existing make/ model suitable for split type ACs of capacity 1.5/2.0TR complete all as specified and directed.Make:- Blue Star/ Voltas/ Carrier as approved by GE. |
| 16 | Supply and fixed in repair, battery operated cordless remote control of existing make/ model suitable for split type ACs of capacity 1.5/ 2.0TR complete all as specified and directed. |
| 17 | Supply and fix in repair of swing motor with flapper suitable for split type ACs of existing make/model capacity 1.5/ 2.0TR complete all as specified and directed.Make:- Blue Star/ Voltas/ Carrier/ Hitachi as approved by GE. |
| 18 | Supply and fix in repair of blower motor of indoor unit suitable for split type ACs of capacity 1.5TR complete all as specified and directed. Make:- Blue Star/ Voltas/ Carrier/ Hitachi as approved by GE. |
| 19 | Supply and fixed in repair, AC electric blower motor of 1/7 HP to 1/5 HP, 230 volts, 930 RPM, 3 speed suitable for split type ACs of capacity 1.5/2.0 TR complete all as specified and directed.Make:- AUE/ GEC/ Blue Star/ Voltas/Carrier/ Usha/ Khaitan as approved by GE. |
| 20 | Supply and fixed in repair, AC electric blower motor of double shaft type of 1/7 HP to 1/5 HP, 230 volts 930 RPM, 3 speed suitable for window/ split type ACs of capacity 1.5 TR/ 2.0TR complete all as specified and directed.Make:- AUE/ GEC/ Blue Star/ Voltas/ Carrier/ Usha/ Khaitan as approved by GE. |
| 21 | Supply and fixed in repair, condenser fan motor suitable for outside condensing unit of split type ACs of capacity 1.5/ 2.0TR having minimum air displacement 400 cft per minutecomplete all as specified and directed.Make of motor:- American/ Universal/ Khaitan/ Usha as approved by GE. |
| 22 | Supply and fixed in repair, 1/4” dia copper tube suitable for split ACs of capacity 1.5/ 2.0TR complete all as specified and directed. |
| 23 | Supply and fixed in repair, 5/8” dia copper tube suitable for split ACs of capacity 1.5/ 2.0TR complete all as specified and directed. |
| 24 | Supply and fixed in repair, 1/2” dia copper tube suitable for split ACs of capacity 1.5/ 2.0TR complete all as specified and directed. |
| 25 | Supply & fixing in repair of 20mm dia transparent PVC heavy duty flexible pipe ISI marked with and including necessary clamps & nails for fixing the drain pipe for drainage of swetting water of indoor unit of split type ACs complete all as specified and directed. |
| 26 | Disconnecting, dismantling and taking out existing defective/ unserviceable fins and tube type cooling coil of any description & in any position and supply & fix new cooling coil 2 Row x 1/2,,5/8dia copper tube and aluminum fins suitable for split type ACs of capacity 1.5/2.0 TR complete all as specified and directed.Make:- Blue Star/ Voltas/ Carrier as approved by GE.Note:- Charging of refrigerant gas R-22/ M-22 shall be measured and paid separately under respective item of BOQ/ Sch`A\" as \"material and labour\" complete. |
| 27 | Supply and fixed in repair, Blower/ Condenser fan blade (PVC) assembly of existing make & size suitable for window type ACs of capacity 1.5/ 2.0TR complete all as specified and directed. |
| 28 | Supply and fixed in repair, PVC front grills ofexisting make, shape & size suitable for window type ACs of capacity 1.5/ 2.0TR complete all as specified and directed. |
| 29 | Supply and fixed in repair, air sweep louvers with motor complete set suitable for window type ACs of capacity 1.5/ 2.0TR complete all as specified and directed. |
| 30 | Supply and fixing in repair of sealed reciprocating type compressor for 1.5 TR of existing size and make and capacity at site including necessary brazing, soldering, pressure testing, R-22 refrigerant gas charging in appropriate quantity and leakage testing on completion complete all as specified and directed.Make : Kirloskar/ GEE/ TECUMSEH / HITACHI/ LG/ VOLTAS/ CARRIERas approved by GE. |
| 31 | Supply and fixing in repair of sealed reciprocating type compressor for 2.0 TR of existing size and makeand capacity at siteincluding necessary brazing, soldering, pressure testing, R-22 refrigerant gas charging in appropriate quantity and leakage testing on completion complete all as specified and directed. Make : Kirloskar/ GEE/ TECUMSEH / HITACHI/ LG/ VOLTAS/ CARRIERas approved by GE. |
| 32 | Supply and fixing in repair of sealed rotary type compressorsuitable for ACs of 1.5TR of existing size and makeand capacity at site including necessary brazing, soldering, pressure testing, R-22 refrigerant gas charging in appropriate quantity and leakage testing on completion complete all as specified and directed. Make : Kirloskar/ GEE/ TECUMSEH / HITACHI/ LG/ VOLTAS/ CARRIERas approved by GE. |
| 33 | Supply and fixing in repair of sealed rotary type compressorsuitable for ACs of 2.0TR of existing size and makeand capacity at site including necessary brazing, soldering, pressure testing, R-22 refrigerant gas charging in appropriate quantity and leakage testing on completion complete all as specified and directed.Make : Kirloskar/ GEE/ TECUMSEH / HITACHI/ LG/ VOLTAS/ CARRIERas approved by GE. |
| 34 | Supply and fixing in repair of sealed rotary type 3 phase compressor suitable for tower ACs of 4.0TR of existing size and makeand capacity at site including necessary brazing, soldering, pressure testing, R-22 refrigerant gas charging in appropriate quantity and leakage testing on completion complete all as specified and directed.Make : Kirloskar/ GEE/ TECUMSEH / HITACHI/ LG/ VOLTAS/ CARRIERas approved by GE. |
| 35 | Supply and fixed in repair, starting capacitor of 4.0/6.0 mfd suitable for blower motor of split type ACs of capacity 1.5/ 2.0TR complete all as specified and directed. Make:-Texla/ Asian/ Keltron/ Unistar/ Sarada/ Syscap as approved by GE.Note :- (i) The contractor will ensure that the unserviceable ACs are rectified within 24 hours of receiving of complaints.(ii) If contractor fails to make ACs serviceable within stipulated time then panelrecovery of 500/- per day for each complaint will be made from contrator dues. |
| 36 | S&F in repair voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170v to 250V with output voltage stablized at 230 V with accuracy of plusminus 2.5% and cap of5.0 KVA.complete all as specified and directed. Make : Atlas/ Finolex/Prince/Kirnotic/ Devidayal as approved by GE. |
| 37 | S&F in repairvoltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170v to 250V with output voltage stablized at 230 V with accuracy of plusminus 2.5% and cap of4.0 KVA complete all as specified and directed. Make : V GUARD / MICROTEX. |
| 38 | Supply and fixed in repair, PVC sheathed, 3 core copper conductor flexible cable of size 2.5sqmm with thimbles of suitable size & shape complete all as specified and directed. Make:- PLAZA/ FINOLEX/ HAVELLS/ NATIONAL/SHALABH as approved by GE. |
| 39 | Supply and fixed in repair, socket outlet 2 in 1, 3 pin 5 Amps and 3 pin 15 Amps, flush universal type complete all as specified & directed. Make:- Anchor/ Key/ Cona as approved by GE. |
| 40 | .S&F in repairAC box modular typewith 25 Amps socket plug top and MCB single pole with a two pin and earth plug and socket complete25 Amp MCB ,240 volts making good disturbed surfaces to match with existing surfaces etc complete all as directed. Make Havells model No DBOXx MCBProtected/legrand/ Indo Asian |
| 41 | Supply and fixed in repair, sheet metal enclosure (AC box) including a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 Volts complete all as specified & directed.Make:- legrand /L & T /havells |
| 42 | Supply and fixed in repair, compressors of refrigerators of following models including cutting the suction and discharge line for removing of un-serviceable compressors and fixing of new compressors by jointing suction & discharge line, welding,brazing/ soldering, vaccumising and charging of gas with required quantity of R-134(a) gas to achieve the efficient cooling & smooth functioning and testing on completion complete all as specified and directed:-Note:- Gas charging of refrigerators shall be measured and paid separately under respective items of BOQ/ Sch\"A\" as \"material and labour\" complete. |
| 43 | Refrigerators compressor of make Kirloskar for single door refrigerator of 100 to 180 Ltrs capacity omplete all as specified and directed. |
| 44 | Refrigerators compressor of make Kirloskar for single door refrigerator of 240 & 310 Ltrs capacity omplete all as specified and directed. |
| 45 | Refrigerators compressor of make Kirloskar for double door refrigerator of 310 & 330 Ltrs capacity omplete all as specified and directed. |
| 46 | Refrigerators compressor of make Kirloskar for double door refrigerator of 400 & 420 Ltrs capacity omplete all as specified and directed. |
| 47 | Supply and fixed in repair, thermostat switch suitable for refrigerators of any capacity complete all as specified and directed.Make:- Renutral/ Indofoss/ Denfoss/ LG as approved by GE. |
| 48 | Supply and fixed in repair, condenser unit of existing make suitable for refrigerator of capacity 100 to 320 Ltrs including jointing of tubes and testing complete all as specified and directed.Make:- LG/ Kelvinator/ Whirlpool/ Cool point/ Godrej as approved by GE.Note:- Charging of refrigerant gas shall be measured and paid separately under respective item of BOQ/ Sch\"A\" as \"material and labour\" complete. |
| 49 | M&L for gas charging with required quantity of refrigerant gas R-134/R-410 in refrigerators/ deep freezers of any capacity and make as directed by AGE for smooth functioning of refrigerators/ deep freezers after carryout vaccum and pressure test and including necessary sealing/ brazing to prevent the leakage, if any, complete all as specified and directed. |
| 50 | M&L for gas charging with required quantity of refrigerant gas R-22/R-407 in window/ split type ACs of any capacity and model as directed by AGE for smooth functioning of ACs including necessary sealing/ brazing to prevent of leakage, if any, complete all as specified and directed. |
| 51 | M&L for 3.0mm thick water proof plywood in repair including cutting to shape as required, fixed with screws to timber frame work/ walls etc and making good the disturbed surfaces as per existing complete all as specified and directed. |
| 52 | Taking down existing window type ACs of 1.5/ 2.0TR capacity after disconnecting all electric connections and re-installation of the same at new location of work site after making the hole/ space in the wall including all other necessary materials as required to accommodate the AC and making good wall surfaces & hole as per existing and making all necessary electric connection and testing on completion complete all as specified and directed. |
| 53 | Taking down & shifting of existing split type air conditioner of capacity 1.5/2.0TR to new location as direted including re-installation/ re-fixing the same at new location i.e outdoor and indoor units at new locations and making all necessary electric/ charging pipe line connections, commissioning and testing on completion and making good the disturbed surfaces of wall/ floor as per existing including comprising of the following accessories/ works complete all as specified and directed:-Note:- Contractor shall deposit the old/ existing bracket to MES store yard. (a) Fixing only cooling unit (indoor) with and including grouting nuts & bolts of required size and shape on wall complete all as specified and directed.(b) Fixing only condensing unit (outdoor) on wall with and including mild steel brackets & fasteners of required size and shape or on and provn of 100mm thick PCC platform of approx size 1.20x0.75M in PCC 1:2:4 type B1 using 20mm graded stone aggregate with and including grouting nuts & bolts of required size and shape on platform complete all as specified and directed.(c) Making holes/ cutting of grooves of suitable size & shape on wall/ floor and making good the same as per existing complete for fixing the gas and drainage pipes complete all as specified and directed.(d) Fixing only of copper pipes as obtained from taking down/ shifting of AC (Approx length 5.0M) including necessary cuttings & bent to shapes as required from indoor unit to outdoor unit including brazing the copper pipes complete all as specified and directed.(e) Fixing of 20mm dia transparent PVC heavy duty flexible pipe (Approx length 2.0M) for drainage complete all as specified and directed.(f) M&L for insulation of copper pipes with insulating materials including covering the same with and including PVC casing and caping of size 75x75mm for mechanical protection of copper pipes complete all as specified and directed (Approx length 5.0M).(g) Charging with required quantity of refrigerant gas R-22/M-22 as directed by AGE for smooth functioning of ACs after carryout vaccum and pressure test including necessary sealing/ brazing to prevent of leakage, if any, complete all as specified and directed.Note:- Refrigeant gas R-22/ M-22 quantity to be measured and paid for separately under appropriate item of sch \"A\" as \"material and labour\" complete. |
| 54 | Supply and fixed in repair, reverse valve (heating/ cooling) of existing make suitable for window/ split type ACs of capacity 1.5/ 2.0TR complete all as specified and directed. |
| 55 | M&L for insulation of copper pipes (refrigerant gas pipes) with insulating materials of approved quality for better cooling effects of split type ACs or heat resistance/ protection of copper pipes from atmosphere including sealing/ covering the same with packing tape complete all as specified and directed.Note:- Length of copper pipes for insulation purpose shall be more than 4.5M and less than 6.0M for each job. |
| 56 | Supply & Fixed\"\" of new compressor for water cooler in repair suitable for 40/80 Ltrs capacity water cooler of any make and model complete all as specified and directed.Make:- kirloskar model KCE-444 HAG/ Tecumseh AE Model No 4440G. |
| 57 | Supply & Fixed\"\" of new compressor for water cooler in repair suitable for 60/120 Ltrs capacity water coolers compete all as specified and directed.Make:- Kirloskar model KCJ 461/467. |
| 58 | Supply & Fixed\"\" of new compressor for water cooler in repair suitable for 120/150/150 Ltrs capacity water coolers compete all as specified and directed. Make:- Tecumseh No AW-1000/AHR-13/ Kirloskar model KCJ 513 HAE-B-420/ 422 or KCJ 511 HAE B-420/ 440. |
| 59 | Supply & Fix in repair of unserviceable PVC connection 15mm bore of 450 mm long with brass coupling with washers at both ends and connection to water cooler and water main complete all as specified and directed. |
| 60 | \"Supply & Fixed\"\" in repair of unserviceable 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed. (Note-Min weight should not be less than 142 gms)Make:-Prayag /Jyoti |
| 61 | \"Supply & Fixed\"\" in repair of unserviceable 15mm dia push button tap, cast copper alloy, screwed down for iron pipe or brass ferrule complete all as specified & directed. |
| 62 | Supply & Fixed in repair of unserviceable aluminium blade for condensing fan motor of water coolers of any model/ size as per existing complete all as specified and directed. |
| 63 | \"Supply & Fixed\"\" in repair of unserviceable plug top 3 pin 15 Amps complete all as specified and directed. |
| 64 | Disconnecting and taking out the defective/ non-functional desert cooler of any description and in any position/ installed at any floor (where any ladders and other T&P are not suppose to use to remove the desert cooler from the position), strip opening of desert cooler, cleaning, servicing, oiling & greasing etc of desert cooler, taking out and removing unserviceable/ defective parts and including replacement of unserviceable spares/ parts i.e condenser, internal wiring, re-assembling & testing of the desert cooler complete all as specified and directed.Note:- Replacement/repair of defective/ wornout spares/ parts of desert cooler i.e condenser & internal wiring shall be measured and paid separately under respective items as \"\"S&F in repair\"\". |
| 65 | M&L for painting after scraping/cleaning surfaces of desert cooler off sizes, applying one coat of black bituminous paint internally and one coat of synthetic enamel paint of approved colour on external surface of desert cooler of any make /type and capacity including writing of SM/ MES No and unit name complete all as specified and directed. |
| 66 | S&F in repair of unserviceable wood wool pads (set of three) in repair includingPVCpipe pieces 03 Nos of required length & dia for connection of water distribution PVC elbo 03 Nos of desert coolers of (Approx) complete all as specified and directed. |
| 67 | S&F in repair of unserviceable submersible pump for desert cooler in repair, heavy duty, single phase including commissioning and testingcomplete all as specified and directed. Make:- Everest/ Shakti/ Crompton Greaves |
| 68 | M&L for disconnecting & taking out for rewinding of existing burnt/ unserviceable exhaust fan motor of desert coolers of any description & in any position of capacity 450mm sweep, 900 RPM, opening of strip and rewinding with & including appropriate size copper super enameled wire of make Atlas/ Finolex / Devi Dayal as approved by the engineer-in-charge including insulating material such as illuminous paper, leatherized paper, cotton tape, glass sleeving, insulating varnish etc complete to the entire satisfaction of Engineer-in-charge including transportation from site to workshop & back to siteafter repair including necessary connections & testing on completion complete all as specified and directed. |
| 69 | S&F of exhaust fan motor of desert coolers in repair,copper winding heavy duty,380mm sweep, 1400 RPM with all accessories complete all as specified and directed. Make:- Everest/ Khaitan/ GEC/ Crompton Greaves |
| 70 | M&L for removing of perished body of desert cooler over all size 0.750x0.750x0.910 mtr from existing site andreplace the same with new body made out of 22 gauge PGI sheet by means of fabrication welding/ jointing having tank size Approximet 0.750x0.750x0.230mtr and front grillmade out of 26 gauge PGI sheet 0.460x 0.460mtr size for air flow direction,03 Nos perforated sheet side panels size Approximet 0.680x0.610mtr of each and also having electric control panel consisting two nos 5amp switch, one rotary speed regulator switch complete and duly painted with two coats of synthetic enamel paint over one coat of primer internally and externally complete all as specified and directed. |
| 71 | \"S&F\"\"of detachable type perforated side panel in repair made out 26 gauge PGI sheet including wood pads of desert coolers of size 90cmX90cmX75cm complete all as specified and directed. |
| 72 | S&F of front grills desert coolers in repair, size 18\"x18\" of each made out of 26 gauge sheet as per sample and including piano type switch complete all as specified and directed. |
| 73 | S&F of front grills of desert coolers in repair, size 24\"x24\" each made out of 26 gauge sheet as per sample and including piano type switch complete all as specified and directed. |
| 74 | M&L for rewinding of burnt ceiling fan 1200/1400mm sweep, 230 Volts, AC (after opening and taking out burnt winding) with suitable size of super enameled copper winding wire as per existing/ original specification of fan including proper insulation with material & insulating varnish etc and testing on full load complete all as specified and directed. |
| 75 | M&L for rewinding of burnt exaust fan (after opening and taking out burnt winding) with suitable size of super enameled copper winding wire as per existing/ original specification of exaust fan including proper insulation with material & insulating varnish etc and testing on full load complete all as specified and directed for the following sizes:- |
| 76 | 380mm sweep, 230 Volt, AC 900 RPM. |
| 77 | 450mm sweep, 230 Volt, AC 1400 RPM. |
| 78 | Taking down of ceiling fan/wall mounted/cabin fan/exhaust fans/Air circulator fan/pedestal fan of any size/ sweep/make from any height of building & dismantling/ opening of blade, stator rotor of ceiling fan for cleaning and servicing/ over hauling by providing oil /grease to the bearings/ bushes and replacement of defective/wornout parts/ spares i.e condenser, bearing, bush, canopy, rubeer reel, MS clamp with nut, bolt & washers and locking split pin and reassembling, commissioning testing of ceiling fan including hanging the same on existing location/ place complete all as specified and directed. Note:-Replacement/repair of defective/ wornout parts/ spares of fan i.e condenser, bearing, bush, canopy rubber reel, MS clamp and nut, bolt, washers & locking split pin shall be measured and paid separately under respective items as \"S&F in repair\". |
| 79 | S&F in repair of bush/ bearing suitable for ceiling fans, exaust fans, wall mounted and pedestal fans of any size & type complete all as specified and directed. |
| 80 | S&F in repair of ball bearing suitable for exaust fans, air circulating fan, wall mounted and pedestal fans of size/ Nos. 6201/ 6202 complete all as specified and directed. Make:- SKF/ NBC/ TATA. |
| 81 | S&F in repair of ball bearing suitable for exaust fans, air circulating fan, wall mounted and pedestal fans of size/ Nos. 6103/6204 complete all as specified and directed. Make:- SKF/ NBC/ TATA. |
| 82 | S&F in repair of rubber reel of suitable sizes for ceiling fans of any size complete all as specified and directed. |
| 83 | S&F in repair of MS clamps suitable size as per sample for hanging the ceiling fans complete all as specified and directed. |
| 84 | S&F in repair of 15mm bore heavy duty MS down rod of 300mm long for hanging ceiling fans complete all as specified and directed. |
| 85 | S&F in repair of 15mm bore heavy duty MS down rod of 450mm long for hanging ceiling fans complete all as specified and directed. |
| 86 | S&F in repair of canopy off sizes suitable for celing fans of 1200/ 1400mm sweep complete all as specified and directed. |
| 87 | S&F in repair of condenser 2.5-4.0 mfd suitable for ceiling fans, desert cooler fans, exaust fans, wall mounted and pedustrial fans of any type & size complete all as specified and directed. |
| 88 | S&F in repair of ceiling fan mini regulator electronic type (5 step) complete all as specified & directed. |
| 89 | M&L for two coat of spray painting with and including synthetic enamel paint of approved colour on all exposed surfaces of ceiling/ air circulator/ pedustrial/ exaust fan after filling of cavities with filler, surface cleaning and preparing of surfaces by using emery paper on around body with bladescomplete all as specified and directed. |
| 90 | Taking down old u/s sub main wiring 2.5/4.0/6.0 Sqmm copper including batten/ conduit and making good disturbed surface to match the existing surface complete all as directed. |
| 91 | S&F \"C\" series MCB SP, 6 to 32 Amps, 240volts, 50Hz , 10kA complete all as specified &directed. |
| 92 | S&F \"C\" series MCB SPN, 40 to 63 Amps, 240volts, 50Hz , 10kA complete all as specified &directed. |
| 93 | M&Lfor sub main wiring with approved colour coding as per IS (Red, Black and green for single phase circuits) with two runs of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable (Red&Black colour) of size 4.0 sqmm drawn in and including PVC conduit not less than 25mm dia with its accessories all as specifeis and directed. |
| 94 | M&Lfor sub main wiring with approved colour coding as per IS (Red, Black and green for single phase circuits) with two runs of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable (Red&Black colour) of size 6.0 sqmm drawn in and including PVC conduit not less than 25mm dia with its accessories all as specifeis and directed. |
| 95 | Taking out existing defective/unserviceable and renewal with new out door unit split type 1.5 TR complete with all accessory location all as existing size and make complete all as specified and directed by Engr-in-charge. |
| 96 | Taking out existing defective/unserviceable and renewal with new out door unit split type 2.0 TR complete with all accessory all as existing size and make complete all as specified and directed by Engr-in-charge. |
| 97 | Taking out existing defective/unserviceable and renewal with new indoor unit split type 1.5 TR complete with all accessoryall as existing size and make complete all as specified and directed by Engr-in-charge. |
| 98 | Taking out existing defective/unserviceable and renewal with new indoor unit split type 2.0 TR complete with all accessory all as existing size and make complete all as specified and directed by Engr-in-charge.Note for item No 89 to 92:- Charging of refrigerant gas R-22/ M-22 shall be measured and paid separately under respective item of BOQ/ Sch`A\" as \"material and labour\" complete. |
| 99 | M&L for repair of unsv PCB including replacement of unsv IC/diode or connected items and refixing the same to same location including commissioning and testing all as specified and directed by Engr-in-charge. |
| 100 | M&L for repairing of air curtain including replacement of unserviceable parts and control wiring, limit switch,/sensor or any wiring/circuitory, IC/diode etc all as specified and directed by Engr-in-charge. |
| 101 | M&L for fixing of outdoor unit of split AC of any capacity on existing surface with fastner/nut bolts and making good surfacecommissioning and testingg all as specified and directed by Engr-in-charge. |
| 102 | Disconnecting of the unserviceable voltage stabilizers capacity upto 10 KVA from the site and removing to workshop for repair and re-fixing/testing/commissioning at the original position after rewinding / replacement of parts/spares to the extent required /reassembling complete all as specified and directed.Note :- Spares/parts shall be measured and paid seperately under respective items of BOQ as \" Supply only\". |
| 103 | Supply only main transformer with super enameled copper wire proper insulated upto 5 KVA capacity for volatage stabilizer complete as specified and directed. |
| 104 | Supply only control transformer with super enameled copper wire proper insulated upto10 KVA capacity for volatage stabilizer complete as specified and directed. |
| 105 | Supply only operating/control relay for stabilizer capacity upto 10 KVA complete as specified and directed. |
| 106 | Supply onlylow/high voltage cut off and TDR system for stabilizer capacity upto 10 KVA complete as specified and directed. |
| 107 | Supply onlyIC controlled circuit for stabilizer capacity upto 10 KVA complete as specified and directed. |
| 108 | Supply only volt meter suitable for voltage stabilizer 0 to 300 volts analog/digital type complete all as specified and directed |
| 109 | S&F in repair contactor suitable for split type ACs of capacity 3.0/ 4.0TR including connections complete all as specified and directed. |
| 110 | S&F in repair phase preventor suitable for split type ACs of capacity 3.0/ 4.0TR including connections complete all as specified and directed. |
| 111 | S&F in repair of printed control board of indoor unit and outdoor unit both of SplitAC (inverter type) Cap 1.5/2.0 TR as per sample complete all as specified and as directed |
| 112 | Taking outof old, unserviceable worn out existing mild steel stand of any size and S&F in replacement of factory made MS stand of suitable size for mounitng of split AC 1.5/2.0 TR duly grouted on walls by using PCC (1:2:4) type B0 (using 12.5mm graded aggregate)painted the steel surfaces with two coat of synthetic enamelled paint over a coat of red oxide primer complete all as specified and as directed. |
| 113 | Supply only suction valve with dead end cap for outdoor unit of split type air conditioner 1.5/2.0 TR as per existing at site all as specified and as directed. |
| 114 | Supply only discharge valve with dead end cap for outdoor unit of split type air conditioner 1.5/2.0 TR as per existing at site all as specified and as directed. |
| 115 | S&Fexhaust Fan steel body AC single phase 380mm sweep and 900RPM turbo force SP with blades, frame and louvers complete including taking doun of unserviceable exaust fans any capacity and depositing to MES store yard all as specified and directed.Make Havells/Bajaj or equivalent. |
| 116 | Supply and fix in repairssheet metal enclouser distribution board double door surface/reccess mounting IP-43protection, 415volt,Vertical TPN 4 Way with provision for suitable MCCB FP up to 125 A as incomer & MCBs SP/TP as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete, including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs,connectors etcall as specified as directed by Engr-in-Charge. |
| 117 | Supply and fix in repairs sheet metal enclouser distribution board double door surface/reccess mounting IP-43protection, 415volt,Vertical TPN 8 Way with provision for suitable MCCB FP up to 160 A as incomer & MCBs SP/TP as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing completeincluding connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs,connectors etc complete all as specified as directed by Engr-in-Charge. |
| 118 | Supply & fix in repairs MCB SP 6 to 32 Amps 240 volts 10 KA\"\"C\"\"Series as specified and as directed. |
| 119 | Supply& fix in repairs MCB SPN 40 to 63 Amps 240 volts 10 KA as specified and as directed. |
| 120 | Supply& fix MCCB, 4-pole, breaking capacity 36 KA, 415 volts, 160 Amps including taking down unservicable onecomplete all as specified and as directed. |
| 121 | Supply& fix MCCB, 4-pole, breaking capacity 25 KA, 415 volts, 125 Amps including taking down unservicable onecomplete all as specified and as directed. |
| 122 | Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 20mm bore medium grade GI pipe for protection of earth wire from plate to main switch board including filling ther earth pit with common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 of SSR part I and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by Engr-in-Charge. (Note: GI wire & GI pipe beyond 7.5Mtr length from earth electrode shall be measured and paid separately). |
| 123 | Supply & laying in replacement of LT UG cable XLPE insulated armouredheavy duty elect cable with stranded aluminiumconductor 1100 volts grade cross section area16 Sqmm 4 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed. |
| 124 | All as per item No. 117 above but of cross sectional area 25 Sqmm, 4 core all as specified and directed. |
| 125 | Excavation in trenches getting out in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables, erection of poles,struts, stays etc and all as specified and as directed by Engr-In-Charge. |
| 126 | Returning, filling in including spreading, levelling,watering and well rammingin layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested, poles,stays,struts have been erected and tested complete all as specified and directed. |
| 127 | Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all asspecified and directed. |
| 128 | M&L for clean dry river sand laid in trenches/ducts for bedding and cushioning to cable, including spreading and levelling complete all as speccified.(Note:- Punned down thickness shall be measured for payment) |
| 129 | M&L for layingburnt brick sub class \"B\" bricks for cable protection level in tranches adjacent to each other, length wise perpendicular to the central axis of cable complete all as specified. |
