Tender For Purchase Under Strive Project
Tender Overview
Project Description
Purchase Under Strive Project , Combination Pliers Insulated, 200Mm , Screw Driver Insulated, 4Mm X 150 Mm X Diamond Head , Screw Driver Insulated, 6Mm X 100 Mm , Electrician Screw Driver Thin Stem Insulated Handle, 4Mm X 100 Mm , Heavy Duty Screw Driver Insulated, 4Mm X 100 Mm , Electrician Screw Driver Thin Stem Insulated Handle,4Mm X 100 Mm , Punch Centre, 9Mm X 150 , Knife Double Bladed Electrician, 100Mm , Neon Tester, 500V , Hammer, Cross Peen With Handle, 250Gram , Hammer, Ball Peen With Handle, 500Gram , Pincer, 150Mm , C-Clamp, 200Mm And 100Mm , Spanner Adjustable Drop Forged, Ss 150Mm & 300Mm , Blow Lamp Brass, 0.5 Liter , Chisel Cold 25Mm X 200Mm , Chisel Firmer With Wooden Handle 6Mm*200Mm , Allen Key Alloy Steel, 1.5 To 10Mm (Set Of 9 Nos) , Grease Gun, 0.5Ltr , Bradawl , Pulley Puller With 3Legs, 150Mm & 300, , Bearing Puller (Inside & Outside), 200Mm , Pipe Vice Cast Iron 100Mm , Scissors Blade, Ss , 200Mm , Scissors Blade, Ss , 150Mm , Crimping Tool ( 1.5 Sq Mm To 16 Sq Mm & 16 Sq Mm To 95Mm Sq Mm) , Wire Cutter & Stripper 150Mm , Mallet Hard Wood, 0.5 Kg , Hammer Extractor Type 250Gram , Hacksaw Frame, Adjustable 300Mm & Fixed 150Mm , Outside Caliper, 150Mm Spring Type , Inside Caliper, 150Mm Spring Type , Divider 150Mm , Pliers Long Nose Insulated, 150Mm , Pliers Flat Nose Insulated, 200Mm , Pliers Round Nose Insulated, 100Mm , Tweezers, 150Mm , Snip Straight And Bent Heavy Duty, 250Mm , D. E Metric Spanner Double Ended, 6-32Mm , Drill Hand Brace , 0 To 100Mm , Drill S. S. Twist Block, ( 2, 5, 6 Mm Set Of 3Nos) , Plane Cutters, 50Mm X 200Mm , Smoothingcutter 50Mm X 200Mm , Gauge Metric, Wire Imperial Stainless Steel Marked In Swg & Mm ( , File Flat, 200Mm* 2Nd Cut With Handle , File Half Round, 200Mm* 2Nd Cut With Handle , File Round, 200Mm* 2Nd Cut With Handle , File Flat Rough, 150Mm With Handle , File Flat Bastard, 250Mm With Handle , File Flat Smooth, 250Mm With Handle , File Rasp, Half Round, 200Mm Bastard With Handle , Copper Bit Soldering Iron, 0.25 Kg , De Soldering Gun, Heat Proof Nozzle, Pvc Type, 250Mm , Hand Vice 50Mm Jaw , Table Vice 100Mm Jaw , Oil Cane 0.5 Liter. , Contractor & Auxiliary Contacts (3 Phase, 415 Volt, 25Amp With 2No And 2Nc) , Contractor & Auxiliary Contacts (3 Phase, 415 Volt, 25Amp With 2No And 2Nc) , Limit Switch ( Limit Swith, Liver Operated 2A 500V, 2-Contacts , Rotary Switch (A. Cut Out Relays-16A, 440V, B. Reverse Current 16A, 440V, C Over Current 16A, 440V, D. Under Voltage 360V-440V) , Relays,B Reverse Current C. Over Current D. Under Voltage 16A 440V , Pin Type, Shackle Type & Suspension Type Insulators , Hand Vice 50Mm Jaw , Load Bank 6 Kw 3Ph , Brake Test Arrangement With Two Spring Balance 0 To 25 Kg. , Laboratory Type Induction Coil 6V To 800-10000V , Knife Switch Dpdt Fitted With Fuse Terminals 16Amp , Knife Switch Tpdt Fitted With Fuse Terminals , Miniature Breaker 16 Amp , Earth Plate A) 60Cmx 60Cm X 3.15Mm Copper Plate, B) 60Cm X 60Cm X 6Mm Gi Plate. , Earth Electrode (Primary Electrode 2100X28x3.25Mm Secondary Cu Strip 20X5mm) , Mccb, 100Aps, Triple Pole , Elcb And Rccb, 25Amps, Double Pole And 25Amps, Double Pole, Ian 30 Ma , Fuses, Hrc Glasses Rewine Type , Rheostat (Sliding Type) A)0 To 25 Ohm- 2Amp,B) 0 To 300 Ohm- 2Amp, C) 0 To 1 Ohm- 10Amp, 1 To 10 Ohm- 5Amp , Capacitors A) Electrolytic Ceramic Polyester Film, Dual Run , Various Electronic Components, As Required Resister ,Diode,Transister , Various Lamps A) Halogen Incandescent Lam B) Fluorescent Tube C) Hp Mercury Vapor Lamp, High_ Pressure Sodium Lamp, Low Pressure Sodium Lamp Led , Plug Socket, Piano Switch, Lamp Holder 5 Amp. , Cable Twister Pair, Non-Metallic Sheathed Cable, Underground Feeder Cable, Ribbon Cable, Metric Sheathed Cable, Multi-Conductor Cable, Coaxial Cable, Direct-Buried Cable 1 Mtr.Each. , Rubber Mat , Electrician Helmet , Rcc Pole With Accessories (Ms Angle Iron, C Clamp, Stay Insulator Etc.)6 Wt , Safety Belt (Leather) , Hydrometer , Series Test Lamp , Thermometer , Out Side Micrometer , Try Square, 150Mm , Steel Rule Graduated Both In Metric And English Unit, 300Mm , Ohm Meter, Series Type & Shunt Type, Portable Box Type 50/2000-Ohm Analog , Ammeter Mc Analog, Portable Box Type Housed In Bakelite Case0-5000 Amp,0-5A,0-25A , Digital Wattmeter 230V1kw 50Hz , A.C. Energy Meter 10 Amp.240W , A.C. Energy Meter 15 Amp.440W , Power Factor Meter Digital440w 20 Amp Three Phase , Frequency Meter 45 To 55 Hdz , Magnetic Flux Meter 0-500 Tesla , Lux Meter 0-500 Tesla , Tachonometer Analog 10000 Rpm , Tachonometer Digital 10000 Rpm , Tong Tester/ Clamp Meter 0-100Amp. , Meggeranalog-500 V , Single Phase Variable Auto 0-Transformer 0-220 V,10Amp. , 3-Point D.C. Starter , 4-Point D.C. Starter , Wheat Stone Bridge With Galvonometer And Battery , Single Phase Variable Auto Transformer , Phase Sequence Indicator , Growler , Ac Starters:- A Resistance Type Starter, B. Direct On Line Starter, C. Star Delta Starter-Manual, D. Star Delta Starter-Semi Autumatic , Oscilloscipe Dual Trace , Function Generator , Solderding Iron , Temperature Controlled Soldering Iron , Discrete Component Trainer , Linear Ic Trainer , Digital Ic Trainer , Domestic Application-A)Electric Hot Plate 1500 Wat. B)Electric Kettle,1500 Watt.C)Electric Iron 1500 Watt.D)Immersion Heater 1500 Watt.E) A.C.Fan.F)Geyser.G)Mixture& Grinder H)Washing Machine Semi Automatic I)Moter Pump , Oil Testing Kit , Inverter With Battery , Voltage Stabilzer , Dc Power Supply , Battery Charger , Current Transformer , Potential Transformer , Hand Saw 450 Mm. , Tenon Saw 300 Mm. , Hand Brush For Bench Cleaning 450 Mm , File Half Round 2 Nd Cut 250Mm , Firmer Chisel, (Bevel) Edge 6 Mm. 10,15,20 And 25 Mm Width (5 Nos.) , Mortise Chisel,06,10,15 Mm. (3 Nos) , Screw Driver 300 Mm (Cabnit Maker) , Mallet Medium Size 500 Grms , Claw Hammer 500 Gr. , Oilstone(Carborundum) Universal Silicon Carbite Combinationrough And Fine 200X 50X25 Mm , Key Hole Saw 250 Mm. , Fret Saw Frame 150 Mm. , Centre Punch 5Mm , Snip Straight 200Mm , Oil Cans 225X225mm , Slip Stone 100 Mm. , ‘T’ Bar Cramp 0.6 Meter. , ‘T’ Bar Cramp 1.25 Mtr , Carpenter Vice 250 Mm Jaw , Saw Sharpwning Vice 250 Jaws , Surface Plate 600 X600mm , Blower 900W , Grease Gun 1 Kg Hahd Operated , Spanner Double Ended Set Of 14 , Foot Rule ( Two Ft. Four Fold )/Steel Rule , Steel Measuring Scale 12 Inch , Marking Knife, 200 Mm. Length , Try Square 200Mm , Bevelsquare 50 Mm. , Carpenter Marking Gauge 1/3-3 , Carpenter Mortise Gauge 1/2-3’’ , Contraction Measuring Scale 500Mm , Spoke Shaves 50 Mm.Cutter , Plane Adjustable Circular 250 Mm , Router Plane 197X42 Mm , Moulding Plane Set , Portable Circular Saw Machine Blade Dia 125 Mm , Power Drill Machine 0-12 Mm Cap. , Portable Sander Machine 200 W,Size93x185mm , , Metal Jack Plane 335 Mm. X 50 Mm Cutter , Electrical Drying Oven (Small Type) , File Flat Rough Double Cut 250 Mm , File, Half Round, Fine Double Cut, 200 Mm , File, Round, Fine Double Cut 200 Mm , File Flat, Fine Double Cut, 250 Mm , File Square, Fine Double Cut, 200 Mm , File Triangular Fine Double Cut 200 Mm , Scriber 100 Mm100 Mm , Centre Punch 150 Mm , Divider Spring Joint 150 Mm , Caliper Spring Joint In Side 150 Mm , Caliper, Odd Leg, Spring Joint 150 Mm , Hammer Ball Pein 55 Grms , Cold Chisel Flat And Cross Cut. 100 Mm , Pliers Combination Insulated 200 Mm , Pliers Long Nose 200 Mm , Pliers Flat Nose 200 Mm , Bench Vice , Hack Saw Tubular Metal Frame Adjustable , Snip Sheet Metal Straight Nose , Snip Sheet Metal Curved Nose , Anvil , Stakes [ Different Types] , Tin Smith , Wooden Mallet /Nylon Mallet , Round Punch , Screw Driver, Plastic Handle, Flat Tip , Soldering Iron Exchangeable Copper Tip , Knife Folded Stainless Steel – , Tenon Saw , Firmer Chisel , Rawal Plug Tool , Tweezers , Seam Ripper 100 Mm , Thimble-100 Mm , Wooden Circular Frame 4, 8, 1,212(Each Trainee) , Colour Plate , Colour Brush No 00,1,200,1,2 , Colour Brush Box (Set Of 12) , Scale Plastic 12 , Hand Aari Neadle (Set Of Three) 100 Mm , Pliers 200 Mm , Automatic Press , Presssing Pad , Measuring Tape 150 Cm , Compas 150 Mm , Zig-Zag Embordoidery Machine Compete Set , Stiching Machine (Matorised) , Stiching Machine (Matorised) , Vaccum Cleaner (Heavy Duty) Powerfull Sucking And Blower System,Dust Case Cap.18 L1200 Watt Power Full Motor,360 Degree Wheeleasy Mobility,Auto Cut. , Precision Set Of Screw Drivers- T5, T6, T7 , Tools Makers Vice 100Mm (Clamp) , Tools Maker Vice 50Mm (Clamp) , Crimping Tool (Pliers) 100 Mm , Continuity Tester100 Mm , Scissors 200Mm , Universal Drop Trimmer For Rg 6/11 Cables , Pam, Ppm,Pwm Trainer Kit , Soldering & De Soldering Station , Dual Dc Regulated Power Supply 30-0-30 V, 2 Amps , Digital Multimeter (3 A Digit) , Dc Regulated Variable Power Supply 0-24 V, 1Amp , Lcr Meter (Digital) , Function Generator (Triangular, Square And Sine Wave) , Dimmer State, 3 Amps , Auto Transforfer 15Amp , Analog Component Trainer , Milliameter Ac 0-200 Ma , Milliameter Dc 0-500 Ma , Digital And Analog Ic Tester , Power Electronics Trainer With At Least 6 No’S Of Onboard Applications , Am/Fm Commercial Radio Receivers , Frequency Modulator And Demodulator Trainer Kit , Smd Soldering & De Soldering Station With Necessary Accessories , Solar Training Kit/Simulator Built In Meters,Multifunction,Dual Axis Tracking Sustem , Lcd Tv-43’’ , Spirit Level Precision Metallic200 Mm , Cylinder 134 A 5 Kg , Torque Wrench 300Mm-12.7Mm , Piercing Valve 1/4Inch , Feeler Gauge 0.05 Mm To 1Mm , Four Way Reversible Valve , Try Square 150 Mm , Engineers Rule (Metal) 300 Mm , Tape Measuring 5Mtrs , Megger1000 V , Multimeter Digital Type , Pressure Gauge Digital Type Dia63 Mm With Recalibration Set , Compound Gauge,Digital Type Dia63 Mm With Recalibration Set Side Vaccum760 Mm Pressure15 Kg/Cm Square , Service Man Thermometer In Metal Case-30 Degree To +110 Degree , Gas Leak Detector For Halogen Gas , Electronic Leak Dectector , Sling Psychro-Meter Mounted On Aluminum Back.-10 Degree C To +110 Degree C , Stop Watch , Venire Caliper -300 Mm , Micrometer Outside Measurement 0-25Mm , Multimeteranalog Type , Micron Vacuum Gaugecapeable To Of Reading Up To 20 Micron , Wire Gauge Metric Andwith Worth Steel Plate Embossing Converse Of British & Metric , Dial Thermometer Remote Control, Armored Capillary Dial 75 Mm-50 Degree To +50 Degreec , Anemometerdigital Type , Split Phase Induction Motor 1 Hp, 230 V , Bldc With Controler 15-30 Watts,315 Volt Dc , Idu Pulse Generation Type Motor 15 W 230Volts Ac , Capacitor Start Induction Motor 1 Hp, 230 V , Ac 3 Phase Motor,400/50 Hz 2 Hp , Star Delta Starter 2 Hp , D.O.L Starter 2 Hp , Oxy-Acetylene Welding Set Complete Cylinders, Regulators Welding Torches Withdifference Nozzles , Measuringsteel Tape-5 Mtr , Combination Plier Insulated -200 Mm , Screw Driver Insulated 4Mmx 150 Mm, Diamond Head , Screw Driver Insulated 6Mmx 150 Mm , Electricianscrew Driver Thin Stem Insulated Handle 4X100mm , Heavy Duty Screw Driver Insulated5x20 Mm , Electrician Screw Driver Thin Stem Insulated Handle 4X250 Mm , Punch Centre 9X150mm , Knife Double Bladed Electrician 100 Mm , Neon Tester 500 V , Steel Rule Graduated Both In Metric And English Unit 300 Mm With Precision Of 1/4Th Mm , Hammer, Cross Peen With Handle 250 Grms , Electrical Symbol And Accessories Charts , Pipe Vice Cast Iron With Hardened Jaw Open Type 100 Mm , Hand Vice 50 Mm , Table Vice 100 Mm Jaw , Hacksaw Frame(With Blade)Adjustable 300 Mmfixed 150 Mm , File Flat200 Mm 2Nd Cut With Handle , File Half Round 200 Mm 2Nd Cut With Handle , File Round 200 Mm 2Nd Cut With Handle , Pliers Long Nose Insulated 150 Mm , Pliers Flat Nose Insulated 200 Mm , Pliers, Round Nose Insulated 100 Mm , D.E. Metric Spanner Double Ended 6-32 Mm , Gauge, Wire Imperial Stainless Steel Marked In Swg & Metric , Portable Electric Drill Machine 0-12 Mm Capacity 750W, 240V With Chuck And Key , Crimping Tool1.5 Sq Mm To 16 Sq Mm,16 Sq Mm To 95 Sq Mm , Pliers Side Cutting 150 Mm , Wire Stripper Adjustable Length , Hammer, Ball Peen With Handle 500 Mm , Scriber (Knurled Centre Position ) 150 Mm , Tool Kit Box/Bag Portable , Allen Key , Scissors Blade 150 Mm , Electrical Loads: Set Of Incandescent Lamp, Tube Light, Cfl, Led Light, Heater And Geyser , Torque Wrench , Pipe Cutter To Cut Pipes , Pipe Cutter To Cut Pipes , Try Square , Multi Meter (Analog) , Load Bank (Variable)Up To 1.2 Kw ( Lamp / Heater Type) , Wire Cutter And Stripper 150 Mm , Earth Plate 60Cm X 60Cm X 3.15Mm Copper Plate,60Cm X 60Cm X 6Mm Gi Plate , Earth Electrodeprimary Electrode 2100X28x3.25Mm ,Secondary Cu Strip 20X5mm , Out Side Micrometer ,0 - 25 Mm Least Count 0.01Mm , Tap Set Different Sizes , Trolley For Transportation Of Batteries , Die For Threading ,Different Sizes , Rooftop Mounting Structure,For 4 X 250 W Solar Panels Mounting Practice, With Tilt Adjustment , Electrical Wiring And Switch Gear Rack,Electrical Control Elements Suitable For Practice Of Control Circuits Using Banana Plugs And Sockets , Protective Relays And Contactors Rack , Mccb , Fuses Hrc/Blass/Rewire Type , Cables: , Twisted Pair , Nonmetallic Sheathed Cable , Underground Feeder Cable , Ribbon Cable , Metallic Sheathed Cable , Multi-Conductor Cable , Direct-Buried Cable , Solar Cable (Red) 5 Sq.Mm , Solar Cable (Black) 5 Sq.Mm , Three Core Wire (230 V, 15 A) , Battery Cable ,7.5 Sqmm , Resin Cored Solder And Solder Wax , Mc – 4 Connector, Pins And Lugs,5 Mm And 7.5 Mm , Multimeter,Digital 0 To 1000 M Ohms, 2V To 700 V,100 Microa To 10A Dc And Ac , Megger,Analog - 500 V , Hydrometer , Solar Insolation Meter , Magnetic Flux Meter , Tong Tester / Clamp Meter , Soldering Iron,25 Watt, 65 Watt And 120 Watt, 230 Volt , Temperature Controlled Soldering Iron,50 Watt, 230 Volt , Thermometer Digital,0° C - 150° C , Solar Cell Based Sunlight Radiation Meter,For Solar Power Measurement Up To 2000 W/Square Meter , Magnetic Compass , Cut Models Of Photo Voltaic Cell Assembly , Cut Model Of Lead Acid Battery , Lead Acid Battery,12V, 40Ah, 75Ah , Lead Acid Battery,12V, 12V, 100 Ah , Solar Simulator For Solar Cell Characteristic Study , Sun Path Finder , Solar Energy Trainer With Grouping Of Solar Cells,To Study Iv Curve Of A Solar Cell Of Minimum 2 Watt Under Variable Illumination, Temperature And Suitable Load , Solar Tracker Demonstrator Kit , Solar Pv E-Learning Software Using Animations For Training , Halogen Lamp With Stand For Illumination Of Solar Panels In Lab,Ac Mains Operated To Provide 0 To 1000 Watts Per Meter Square , Motorized Bench Grinder Ac Mains Operated , Battery Charger , Solar Photovoltaic Module,75 W Mono Crystalline Module,75 W Amorphous Silicon Module,250 W Thin Film Module,5W, 10W, 40W Poly Crystalline Module , Solar Panels ,250 Wp , Solar Charge Controller With Dusk To Dawn Automatic Switching , Solar Charge Controller With Manual Switch ( Day Lighting)12V, 10A , Array Junction Box ,For Connecting 250W X 4 Nos. Solar Panel With Dc Fuse, Dc Mcb, And Surge Suppressor Protection , Solar Lantern Assembly Set,Led Type , Solar Lantern Assembly Set,Clf Type , Home Light System ,12 V Dc With Fm Receiver, Led Bulb And Mobile Charger As Loads , Clinometer ,For Angle Measurement , Spirit Level,For Floor Level Check , Anemometer ,For Wind Speed Measurement , Dc Table Fan ,12 V , A.C. Voltmeter M.I,0 –500V Ac , Volt Meter,0 - 30V , Volt Meter0 - 100V , Ammeter Mc,0 - 1A , Ammeter Mc0 - 5A , Ammeter Mc Centre Zero0 - 20A , Ammeter Mc Centre Zero,0-50A , Power Factor Meter , Rheostat ,0 -1 Ohm, 5 Amp,0 -10 Ohm, 5 Amp,0- 25 Ohm, 1 Amp ,0- 300 Ohm, 1 Amp , A.C. Energy Meter ,Single Phase, 10 A, 240 V Induction Type , A.C. Energy Meter ,Three Phase, 15 A, 440 V Induction Type , Kilo Wattmeter Analog ,0-1.5-3Kw, Pressure Coil Rating- 240V/440V, Current Rating-5A/10A Analog, Portable Type Housed In Bakelite Case , Digital Wattmeter , Phase Sequence Indicator,3 Phase, 415 V , Frequency Meter,45 To 55 Hz , Dc Led Lamp3w, 5W, 10W , Dc Pump 24 V , Pwm Controller , Mppt Charge Controller , Inverter With Battery1 Kva With 12 V Battery Input- 12 Volt Dc, Output- 220 Volt Ac , Solar Pcuoff Grid 1 Kw Mppt Sine Wave Solar Power Conditioning Unit , Solar Grid Tied Inverter Demonstrator Kit-300W Kw , Solar Street Light-12V, 75Ah Battery, 75 Wp Solar Panel, 12V, 10A Dusk To Dawn Charge Controller, 60 W Led Lights And 9 M Height Pole All Dismountable , Rechargeable Battery -12 V 100 Ah , Rechargeable Battery -12 V 7 Ah , Rechargeable Battery 12 V 5Ah , Led Lights-12 V Dc , Led Lights- 6V Dc , Rubber Gloves , Cotton Gloves , Gum Boots , Safety Goggles , Safety Helmet , First Aid Kit , Fire Extinguisherco2-2Kg , Fire Buckets Standerd Size , Safety Sign Boards , Wiring Board -3 Meters X 1 Meter With 0.5 Meter Projection On The Top
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Feb-2023 | EXTENSION OF DATE | Date | 21-Feb-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Combination Pliers Insulated, 200mm |
| 2 | Screw Driver insulated, 4mm x 150 mm x diamond head |
| 3 | Screw Driver insulated, 6mm x 100 mm |
| 4 | Electrician Screw driver thin stem insulated handle, 4mm x 100 mm |
| 5 | Heavy Duty screw driver insulated, 4mm x 100 mm |
| 6 | Electrician Screw driver thin stem insulated handle,4mm x 100 mm |
| 7 | Punch Centre, 9mm x 150 |
| 8 | Knife Double bladed Electrician, 100mm |
| 9 | Neon Tester, 500v |
| 10 | Hammer, cross peen with handle, 250gram |
| 11 | Hammer, ball peen with handle, 500gram |
| 12 | Pincer, 150mm |
| 13 | C-clamp, 200mm and 100mm |
| 14 | Spanner Adjustable drop Forged, SS 150mm & 300mm |
| 15 | Blow Lamp brass, 0.5 liter |
| 16 | Chisel cold 25mm x 200mm |
| 17 | Chisel Firmer with wooden handle 6mm*200mm |
| 18 | Allen Key alloy Steel, 1.5 to 10mm (Set of 9 no\"s) |
| 19 | Grease Gun, 0.5ltr |
| 20 | Bradawl |
| 21 | Pulley Puller with 3legs, 150mm & 300, |
| 22 | Bearing Puller (inside & outside), 200mm |
| 23 | Pipe Vice Cast Iron 100mm |
| 24 | Scissors blade, SS , 200mm |
| 25 | Scissors blade, SS , 150mm |
| 26 | Crimping Tool ( 1.5 Sq mm to 16 Sq mm & 16 Sq mm to 95mm Sq mm) |
| 27 | Wire Cutter & Stripper 150mm |
| 28 | Mallet hard wood, 0.5 kg |
| 29 | Hammer Extractor type 250gram |
| 30 | Hacksaw Frame, Adjustable 300mm & Fixed 150mm |
| 31 | Outside Caliper, 150mm spring Type |
| 32 | Inside Caliper, 150mm Spring Type |
| 33 | Divider 150mm |
| 34 | Pliers Long nose Insulated, 150mm |
| 35 | Pliers flat nose insulated, 200mm |
| 36 | Pliers Round nose insulated, 100mm |
| 37 | Tweezers, 150mm |
| 38 | Snip Straight and bent heavy Duty, 250mm |
| 39 | D. E metric Spanner Double Ended, 6-32mm |
| 40 | Drill hand brace , 0 to 100mm |
| 41 | Drill S. S. Twist block, ( 2, 5, 6 mm set of 3nos) |
| 42 | Plane Cutters, 50mm x 200mm |
| 43 | SmoothingCutter 50mm x 200mm |
| 44 | Gauge metric, wire imperial stainless steel marked in SWG & mm ( |
| 45 | File flat, 200mm* 2nd cut with handle |
| 46 | File half round, 200mm* 2nd cut with handle |
| 47 | File round, 200mm* 2nd cut with handle |
| 48 | file flat rough, 150mm with handle |
| 49 | file flat bastard, 250mm with handle |
| 50 | file flat smooth, 250mm with handle |
| 51 | File Rasp, half round, 200mm bastard with handle |
| 52 | Copper bit soldering iron, 0.25 kg |
| 53 | De soldering Gun, Heat proof Nozzle, PVC type, 250mm |
| 54 | Hand Vice 50mm jaw |
| 55 | Table Vice 100mm jaw |
| 56 | Oil cane 0.5 liter. |
| 57 | Contractor & auxiliary contacts (3 phase, 415 volt, 25amp with 2no and 2Nc) |
| 58 | Contractor & auxiliary contacts (3 phase, 415 volt, 25amp with 2no and 2Nc) |
| 59 | Limit switch ( limit swith, liver operated 2A 500v, 2-contacts |
| 60 | Rotary switch (a. Cut out Relays-16A, 440v, b. Reverse Current 16a, 440v, c Over Current 16A, 440v, d. Under Voltage 360v-440v) |
| 61 | Relays,b Reverse current c. over current d. under voltage 16A 440V |
| 62 | Pin Type, shackle type & suspension type insulators |
| 63 | Hand Vice 50mm jaw |
| 64 | Load Bank 6 KW 3PH |
| 65 | Brake test arrangement with two Spring balance 0 to 25 Kg. |
| 66 | Laboratory type induction coil 6V to 800-10000V |
| 67 | Knife Switch DPDT fItted with fuse terminals 16Amp |
| 68 | Knife Switch TPDT fItted with fuse terminals |
| 69 | Miniature Breaker 16 Amp |
| 70 | Earth Plate A) 60cmx 60cm x 3.15mm Copper plate, B) 60cm x 60cm x 6mm GI plate. |
| 71 | Earth electrode (Primary Electrode 2100x28x3.25mm Secondary Cu Strip 20x5mm) |
| 72 | MCCB, 100aps, Triple pole |
| 73 | ELCB AND RCCB, 25amps, Double pole and 25amps, double pole, Ian 30 mA |
| 74 | Fuses, HRC glasses Rewine Type |
| 75 | Rheostat (Sliding Type) a)0 to 25 ohm- 2amp,b) 0 to 300 ohm- 2amp, c) 0 to 1 ohm- 10amp, 1 to 10 ohm- 5amp |
| 76 | Capacitors a) Electrolytic Ceramic Polyester film, Dual run |
| 77 | Various Electronic Components, as Required Resister ,Diode,Transister |
| 78 | Various lamps A) halogen incandescent lam B) Fluorescent tube C) Hp mercury Vapor lamp, high_ pressure sodium lamp, low pressure sodium lamp led |
| 79 | Plug Socket, piano switch, lamp holder 5 Amp. |
| 80 | Cable Twister pair, Non-Metallic Sheathed Cable, Underground Feeder Cable, Ribbon Cable, Metric Sheathed Cable, Multi-Conductor cable, Coaxial Cable, Direct-Buried Cable 1 mtr.each. |
| 81 | Rubber mat |
| 82 | Electrician Helmet |
| 83 | RCC Pole with Accessories (MS angle iron, C clamp, Stay insulator etc.)6 wt |
| 84 | Safety belt (leather) |
| 85 | Hydrometer |
| 86 | Series Test Lamp |
| 87 | Thermometer |
| 88 | Out Side Micrometer |
| 89 | Try Square, 150mm |
| 90 | Steel Rule Graduated both in metric and English unit, 300mm |
| 91 | Ohm Meter, Series type & shunt type, portable box type 50/2000-ohm analog |
| 92 | Ammeter MC Analog, portable box type housed in Bakelite case0-5000 amp,0-5A,0-25A |
| 93 | Digital Wattmeter 230V1KW 50HZ |
| 94 | A.C. Energy meter 10 Amp.240w |
| 95 | A.C. Energy meter 15 amp.440w |
| 96 | Power Factor Meter Digital440w 20 amp three phase |
| 97 | Frequency Meter 45 to 55 hdz |
| 98 | Magnetic Flux Meter 0-500 tesla |
| 99 | Lux meter 0-500 tesla |
| 100 | Tachonometer Analog 10000 RPM |
| 101 | Tachonometer Digital 10000 rpm |
| 102 | Tong tester/ clamp meter 0-100Amp. |
| 103 | MeggerAnalog-500 v |
| 104 | Single phase Variable Auto 0-transformer 0-220 v,10Amp. |
| 105 | 3-point D.C. Starter |
| 106 | 4-point D.C. Starter |
| 107 | Wheat Stone Bridge with Galvonometer and battery |
| 108 | Single phase Variable Auto transformer |
| 109 | Phase Sequence Indicator |
| 110 | Growler |
| 111 | Ac Starters:- a Resistance type Starter, b. Direct on line starter, C. Star Delta starter-Manual, d. Star Delta starter-Semi autumatic |
| 112 | Oscilloscipe Dual trace |
| 113 | Function Generator |
| 114 | Solderding Iron |
| 115 | Temperature Controlled Soldering iron |
| 116 | Discrete Component Trainer |
| 117 | Linear IC trainer |
| 118 | Digital IC trainer |
| 119 | Domestic Application-A)Electric Hot plate 1500 wat. B)Electric kettle,1500 watt.C)Electric iron 1500 watt.D)Immersion Heater 1500 watt.E) A.C.Fan.f)Geyser.g)mixture& grinder h)washing machine semi automatic i)moter pump |
| 120 | oil testing kit |
| 121 | inverter with battery |
| 122 | Voltage Stabilzer |
| 123 | DC power Supply |
| 124 | Battery Charger |
| 125 | Current Transformer |
| 126 | Potential Transformer |
| 127 | HAND SAW 450 MM. |
| 128 | TENON SAW 300 MM. |
| 129 | HAND BRUSH FOR BENCH CLEANING 450 MM |
| 130 | FILE HALF ROUND 2 ND cut 250mm |
| 131 | FIRMER CHISEL, (BEVEL) EDGE 6 MM. 10,15,20 AND 25 MM WIDTH (5 NOS.) |
| 132 | MORTISE CHISEL,06,10,15 MM. (3 NOS) |
| 133 | SCREW DRIVER 300 MM (CABNIT MAKER) |
| 134 | MALLET MEDIUM SIZE 500 grms |
| 135 | CLAW HAMMER 500 GR. |
| 136 | OILSTONE(CARBORUNDUM) UNIVERSAL SILICON CARBITE COMBINATIONROUGH AND FINE 200X 50X25 MM |
| 137 | KEY HOLE SAW 250 MM. |
| 138 | FRET SAW FRAME 150 MM. |
| 139 | CENTRE PUNCH 5mm |
| 140 | SNIP STRAIGHT 200mm |
| 141 | Oil Cans 225x225mm |
| 142 | SLIP STONE 100 mm. |
| 143 | ‘T’ BAR CRAMP 0.6 METER. |
| 144 | ‘T’ BAR CRAMP 1.25 mtr |
| 145 | CARPENTER VICE 250 MM JAW |
| 146 | SAW SHARPWNING VICE 250 JAWS |
| 147 | SURFACE PLATE 600 X600mm |
| 148 | Blower 900w |
| 149 | Grease Gun 1 kg hahd operated |
| 150 | SPANNER DOUBLE ENDED SET OF 14 |
| 151 | Foot rule ( two ft. Four fold )/STEEL RULE |
| 152 | Steel Measuring Scale 12 inch |
| 153 | MARKING KNIFE, 200 MM. LENGTH |
| 154 | Try SQUARE 200mm |
| 155 | BEVELSQUARE 50 MM. |
| 156 | CARPENTER MARKING GAUGE 1/3-3\"\" |
| 157 | CARPENTER MORTISE GAUGE 1/2-3’’ |
| 158 | Contraction measuring Scale 500mm |
| 159 | SPOKE SHAVES 50 MM.cutter |
| 160 | PLANE ADJUSTABLE CIRCULAR 250 MM |
| 161 | ROUTER PLANE 197x42 mm |
| 162 | MOULDING PLANE SET |
| 163 | PORTABLE CIRCULAR SAW MACHINE blade dia 125 mm |
| 164 | POWER DRILL MACHINE 0-12 mm cap. |
| 165 | PORTABLE SANDER MACHINE 200 w,size93x185mm |
| 166 | , METAL JACK PLANE 335 MM. X 50 MM CUTTER |
| 167 | ELECTRICAL DRYING OVEN (Small type) |
| 168 | File flat rough double cut 250 MM |
| 169 | File, half round, fine double cut, 200 MM |
| 170 | File, round, fine double cut 200 MM |
| 171 | File flat, fine double cut, 250 MM |
| 172 | File square, fine double cut, 200 MM |
| 173 | File triangular fine double cut 200 MM |
| 174 | Scriber 100 MM100 MM |
| 175 | Centre punch 150 MM |
| 176 | Divider spring joint 150 MM |
| 177 | Caliper spring joint in side 150 MM |
| 178 | Caliper, odd leg, spring joint 150 MM |
| 179 | Hammer ball pein 55 grms |
| 180 | Cold Chisel flat and cross cut. 100 MM |
| 181 | Pliers combination insulated 200 mm |
| 182 | Pliers long nose 200 MM |
| 183 | Pliers flat nose 200 MM |
| 184 | Bench vice |
| 185 | Hack saw tubular metal frame adjustable |
| 186 | Snip sheet metal straight nose |
| 187 | Snip sheet metal curved nose |
| 188 | Anvil |
| 189 | Stakes [ different Types] |
| 190 | Tin smith |
| 191 | Wooden mallet /Nylon mallet |
| 192 | Round Punch |
| 193 | Screw driver, plastic handle, Flat tip |
| 194 | Soldering iron exchangeable copper tip |
| 195 | Knife folded stainless steel – |
| 196 | Tenon saw |
| 197 | Firmer chisel |
| 198 | Rawal plug tool |
| 199 | Tweezers |
| 200 | SEAM RIPPER 100 MM |
| 201 | THIMBLE-100 MM |
| 202 | WOODEN CIRCULAR FRAME 4\", 8\", 1,212\"(each trainee) |
| 203 | COLOUR PLATE |
| 204 | COLOUR BRUSH NO 00,1,200,1,2 |
| 205 | COLOUR BRUSH BOX (SET OF 12) |
| 206 | SCALE PLASTIC 12\" |
| 207 | HAND Aari Neadle (set of three) 100 MM |
| 208 | PLIERS 200 MM |
| 209 | AUTOMATIC PRESS |
| 210 | PRESSSING PAD |
| 211 | MEASURING TAPE 150 CM |
| 212 | COMPAS 150 MM |
| 213 | ZIG-ZAG EMBORDOIDERY MACHINE COMPETE SET |
| 214 | STICHING MACHINE (MATORISED) |
| 215 | STICHING MACHINE (MATORISED) |
| 216 | VACCUM CLEANER (heavy duty) powerfull sucking and blower system,dust case cap.18 l1200 watt power full motor,360 degree wheeleasy mobility,auto cut. |
| 217 | Precision set of screw drivers- T5, T6, T7 |
| 218 | Tools makers vice 100mm (clamp) |
| 219 | Tools maker vice 50mm (clamp) |
| 220 | Crimping tool (pliers) 100 mm |
| 221 | Continuity tester100 mm |
| 222 | Scissors 200mm |
| 223 | Universal drop trimmer for RG 6/11 cables |
| 224 | PAM, PPM,PWM trainer kit |
| 225 | Soldering & De soldering Station |
| 226 | Dual DC regulated power supply 30-0-30 V, 2 Amps |
| 227 | Digital Multimeter (3 \"A digit) |
| 228 | DC regulated variable power supply 0-24 V, 1Amp |
| 229 | LCR meter (Digital) |
| 230 | Function generator (Triangular, square and sine wave) |
| 231 | Dimmer state, 3 Amps |
| 232 | Auto Transforfer 15AMP |
| 233 | Analog Component Trainer |
| 234 | Milliameter AC 0-200 ma |
| 235 | Milliameter DC 0-500 ma |
| 236 | Digital and analog IC Tester |
| 237 | POWER ELECTRONICS TRAINER with at least 6 no’s of onboard applications |
| 238 | AM/FM Commercial radio receivers |
| 239 | Frequency modulator and Demodulator trainer kit |
| 240 | SMD Soldering & De soldering Station with necessary accessories |
| 241 | Solar Training Kit/Simulator built in meters,multifunction,dual axis tracking sustem |
| 242 | LCD TV-43’’ |
| 243 | Spirit level precision metallic200 mm |
| 244 | Cylinder 134 a 5 kg |
| 245 | Torque Wrench 300mm-12.7mm |
| 246 | piercing valve 1/4inch |
| 247 | feeler gauge 0.05 mm to 1mm |
| 248 | Four way reversible valve |
| 249 | Try square 150 MM |
| 250 | Engineers rule (metal) 300 MM |
| 251 | Tape measuring 5MTRS |
| 252 | Megger1000 v |
| 253 | Multimeter digital type |
| 254 | Pressure gauge Digital type dia63 mm with recalibration set |
| 255 | Compound gauge,Digital type dia63 mm with recalibration set side vaccum760 mm pressure15 kg/cm square |
| 256 | Service man thermometer in metal case-30 degree to +110 degree |
| 257 | Gas leak detector for halogen gas |
| 258 | Electronic leak dectector |
| 259 | Sling psychro-meter mounted on aluminum back.-10 degree C to +110 Degree C |
| 260 | Stop watch |
| 261 | Venire caliper -300 MM |
| 262 | Micrometer outside measurement 0-25MM |
| 263 | MultimeterAnalog type |
| 264 | Micron vacuum gaugecapeable to of reading up to 20 micron |
| 265 | Wire gauge metric andwith worth steel plate embossing converse of British & metric |
| 266 | Dial thermometer remote control, armored capillary dial 75 mm-50 degree to +50 degreeC |
| 267 | AnemometerDigital type |
| 268 | Split phase induction motor 1 hp, 230 V |
| 269 | BLDC with controler 15-30 watts,315 volt DC |
| 270 | IDU pulse generation type motor 15 w 230volts AC |
| 271 | Capacitor start induction motor 1 Hp, 230 V |
| 272 | AC 3 Phase motor,400/50 Hz 2 Hp |
| 273 | Star delta starter 2 Hp |
| 274 | D.O.L Starter 2 Hp |
| 275 | Oxy-acetylene welding set complete cylinders, regulators welding torches withdifference nozzles |
| 276 | MeasuringSteel Tape-5 mtr |
| 277 | Combination Plier Insulated -200 mm |
| 278 | Screw Driver Insulated 4mmX 150 mm, Diamond Head |
| 279 | Screw Driver Insulated 6mmX 150 mm |
| 280 | Electricianscrew driver thin stem insulated handle 4x100mm |
| 281 | Heavy Duty Screw Driver insulated5x20 mm |
| 282 | Electrician Screw Driver thin stem insulated handle 4x250 mm |
| 283 | Punch Centre 9x150mm |
| 284 | Knife Double Bladed Electrician 100 mm |
| 285 | Neon Tester 500 v |
| 286 | Steel Rule Graduated both in Metric and English Unit 300 mm with precision of 1/4th mm |
| 287 | Hammer, cross peen with handle 250 grms |
| 288 | Electrical Symbol and Accessories Charts |
| 289 | Pipe vice Cast Iron with hardened jaw open type 100 mm |
| 290 | Hand Vice 50 mm |
| 291 | Table Vice 100 mm jaw |
| 292 | Hacksaw frame(with blade)Adjustable 300 mmFixed 150 mm |
| 293 | File flat200 mm 2nd cut with handle |
| 294 | File half round 200 mm 2nd cut with handle |
| 295 | File round 200 mm 2nd cut with handle |
| 296 | Pliers long nose insulated 150 mm |
| 297 | Pliers flat nose insulated 200 mm |
| 298 | Pliers, round nose insulated 100 mm |
| 299 | D.E. metric Spanner Double Ended 6-32 mm |
| 300 | Gauge, wire imperial stainless steel marked in SWG & metric |
| 301 | Portable Electric Drill Machine 0-12 mm capacity 750W, 240V with chuck and key |
| 302 | Crimping Tool1.5 sq mm to 16 sq mm,16 sq mm to 95 sq mm |
| 303 | Pliers Side Cutting 150 mm |
| 304 | Wire stripper adjustable length |
| 305 | Hammer, ball peen With handle 500 mm |
| 306 | Scriber (Knurled centre position ) 150 mm |
| 307 | Tool kit Box/bag portable |
| 308 | Allen Key |
| 309 | Scissors blade 150 mm |
| 310 | Electrical loads: set of Incandescent lamp, Tube light, CFL, LED light, Heater and Geyser |
| 311 | Torque wrench |
| 312 | Pipe Cutter to cut pipes |
| 313 | Pipe Cutter to cut pipes |
| 314 | Try Square |
| 315 | Multi Meter (analog) |
| 316 | Load Bank (variable)Up to 1.2 KW ( Lamp / heater Type) |
| 317 | Wire Cutter and Stripper 150 mm |
| 318 | Earth Plate 60cm X 60cm X 3.15mm Copper Plate,60cm X 60cm X 6mm GI Plate |
| 319 | Earth ElectrodePrimary Electrode 2100x28x3.25mm ,Secondary Cu Strip 20x5mm |
| 320 | Out Side Micrometer ,0 - 25 mm least count 0.01mm |
| 321 | Tap set Different sizes |
| 322 | Trolley for Transportation of Batteries |
| 323 | Die for Threading ,Different sizes |
| 324 | Rooftop Mounting Structure,For 4 x 250 W solar panels mounting practice, with tilt adjustment |
| 325 | Electrical wiring and switch gear rack,Electrical control elements suitable for practice of control circuits using banana plugs and sockets |
| 326 | Protective relays and contactors rack |
| 327 | MCCB |
| 328 | Fuses HRC/BLASS/REWIRE TYPE |
| 329 | Cables: |
| 330 | Twisted Pair |
| 331 | Nonmetallic Sheathed Cable |
| 332 | Underground Feeder Cable |
| 333 | Ribbon Cable |
| 334 | Metallic Sheathed Cable |
| 335 | Multi-Conductor Cable |
| 336 | Direct-Buried Cable |
| 337 | Solar cable (Red) 5 SQ.MM |
| 338 | Solar cable (Black) 5 SQ.MM |
| 339 | Three core wire (230 V, 15 A) |
| 340 | Battery cable ,7.5 sqmm |
| 341 | Resin cored Solder and Solder wax |
| 342 | MC – 4 connector, pins and lugs,5 mm and 7.5 mm |
| 343 | Multimeter,Digital 0 to 1000 M Ohms, 2V to 700 V,100 microA to 10A DC and AC |
| 344 | Megger,Analog - 500 V |
| 345 | Hydrometer |
| 346 | Solar Insolation meter |
| 347 | Magnetic Flux Meter |
| 348 | Tong Tester / Clamp Meter |
| 349 | Soldering Iron,25 Watt, 65 Watt and 120 Watt, 230 Volt |
| 350 | Temperature controlled Soldering Iron,50 Watt, 230 Volt |
| 351 | Thermometer Digital,0° C - 150° C |
| 352 | Solar cell based sunlight radiation meter,For Solar power measurement up to 2000 w/square meter |
| 353 | Magnetic compass |
| 354 | Cut models of photo voltaic cell assembly |
| 355 | Cut model of Lead acid battery |
| 356 | Lead Acid battery,12V, 40Ah, 75Ah |
| 357 | Lead Acid battery,12V, 12V, 100 Ah |
| 358 | Solar simulator for solar cell characteristic study |
| 359 | Sun path finder |
| 360 | Solar energy trainer with grouping of solar cells,To study IV curve of a solar cell of minimum 2 watt under variable illumination, temperature and suitable load |
| 361 | Solar tracker demonstrator kit |
| 362 | Solar PV e-learning software using animations for training |
| 363 | Halogen lamp with stand for illumination of solar panels in lab,AC mains operated to provide 0 to 1000 watts per meter square |
| 364 | Motorized Bench Grinder AC mains operated |
| 365 | Battery Charger |
| 366 | Solar photovoltaic module,75 W mono crystalline module,75 W amorphous silicon module,250 W thin film module,5W, 10W, 40W poly crystalline module |
| 367 | Solar panels ,250 Wp |
| 368 | Solar Charge controller with Dusk to Dawn automatic switching |
| 369 | Solar charge controller with manual switch ( Day lighting)12V, 10A |
| 370 | Array junction box ,for connecting 250W x 4 Nos. solar panel with DC fuse, DC MCB, and surge suppressor protection |
| 371 | Solar lantern assembly set,LED TYPE |
| 372 | Solar lantern assembly set,CLF TYPE |
| 373 | Home light system ,12 V DC with FM receiver, LED bulb and mobile charger as loads |
| 374 | Clinometer ,for Angle measurement |
| 375 | Spirit level,For floor level check |
| 376 | Anemometer ,for wind speed measurement |
| 377 | DC table fan ,12 V |
| 378 | A.C. Voltmeter M.I,0 –500V AC |
| 379 | Volt meter,0 - 30V |
| 380 | Volt meter0 - 100V |
| 381 | Ammeter MC,0 - 1A |
| 382 | Ammeter MC0 - 5A |
| 383 | Ammeter MC centre zero0 - 20A |
| 384 | Ammeter MC centre zero,0-50A |
| 385 | Power Factor Meter |
| 386 | Rheostat ,0 -1 Ohm, 5 Amp,0 -10 Ohm, 5 Amp,0- 25 Ohm, 1 Amp ,0- 300 Ohm, 1 Amp |
| 387 | A.C. Energy Meter ,Single Phase, 10 A, 240 V induction type |
| 388 | A.C. Energy Meter ,Three Phase, 15 A, 440 V induction type |
| 389 | Kilo Wattmeter Analog ,0-1.5-3KW, pressure coil rating- 240v/440v, current rating-5A/10A Analog, portable type Housed in bakelite case |
| 390 | Digital Wattmeter |
| 391 | Phase Sequence Indicator,3 Phase, 415 V |
| 392 | Frequency Meter,45 to 55 Hz |
| 393 | DC LED Lamp3W, 5W, 10W |
| 394 | DC Pump 24 V |
| 395 | PWM Controller |
| 396 | MPPT Charge Controller |
| 397 | Inverter with Battery1 KVA with 12 V Battery Input- 12 volt DC, Output- 220 volt AC |
| 398 | Solar PCUOff grid 1 KW MPPT Sine wave Solar Power Conditioning Unit |
| 399 | Solar Grid tied inverter Demonstrator kit-300W KW |
| 400 | Solar Street Light-12V, 75Ah battery, 75 Wp solar panel, 12V, 10A dusk to dawn charge controller, 60 W LED lights and 9 m height pole all dismountable |
| 401 | Rechargeable battery -12 V 100 Ah |
| 402 | Rechargeable battery -12 V 7 Ah |
| 403 | Rechargeable battery 12 V 5Ah |
| 404 | LED lights-12 V DC |
| 405 | LED lights- 6V DC |
| 406 | Rubber gloves |
| 407 | Cotton gloves |
| 408 | Gum boots |
| 409 | Safety Goggles |
| 410 | Safety Helmet |
| 411 | First Aid kit |
| 412 | Fire ExtinguisherCO2-2KG |
| 413 | Fire Buckets Standerd Size |
| 414 | Safety sign boards |
| 415 | Wiring Board -3 meters x 1 meter with 0.5 meter projection on the top |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender