Tender For Periodic Maintenance On Thona Gehra Road Under Amp For The Year 2021-22 (Revalidated For The Year 2022-23) Km. 0/0 To 3/0
Tender Overview
Project Description
Periodic Maintenance On Thona Gehra Road Under Amp For The Year 2021-22 ( Revalidated For The Year 2022-23 ) Km. 0 / 0 To 3 / 0 ( Sh- Providing And Laying 2Cm Thick Premix Carpet With Seal Coat In Km. 1 / 0 To 2 / 0 )
BOQ
| Sl. No. | Item Description |
| 1 | Repair of pot holes including trimming of sides and cutting to shape, filling the pot hole with G-III aggregate where necessary , applying tack coat with bitumen VG-10 A 0.30kg per square metre and laying of permix carpet 20mm average thick mix with bitumen @c2.14km per square metre and compacting it with road roller 8-10 Tonne weight to the the desired degree of compaction as per HPPWd specification |
| 2 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm (Zero decimal seven zero to one kilogramme per square metre)using mechanical means as per Technical Specification Clause 502 including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge. |
| 3 | Providing and applying tack coat with Bitumen emulsion (RS-1) of approved manufacturerusing emulsion distributor at the rate of 0.25 to 0.30 kg per sqm(Zero decimal two five to zero decimalthree zero kilogramme per kilogramme per square metre) on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge. |
| 4 | 20 mm thick open graded Premix Carpet using Bituminous (S-90) penetration grade Binder. Providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm (Thirteen point two to five point six millimetre) aggregates using penetration grade bitumen (S-90) to required line, grade and level to serve as wearing course on a previously prepared surface / base including mixing in suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grade to be followed by seal coat of either type A or Type B or Type Cas per Technical Specification clause 508 per direction and entire satisfaction of the Engineer-in-chargee within all leads and lifts and other incidentals. |
| 5 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification clause 510. (Bitumen S -90)per direction and entire satisfaction of the Engineer-in-chargee within all leads and lifts and other incidentals. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender