Bids Are Invited For 1 Providing And Placing In Position Of Executive Table With Side Table. Overall Size Of Main Table: 2350Mm ( W ) X 1150Mm ( D ) X 750Mm ( H ) And Size Of Side Table: 1200Mm ( W ) X 500Mm ( D ) X 750Mm ( H ) . The Table Is Made Of 25 Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. Soft Closing Access Flap Within-Build Power Box Are Provided On Work Surface For Wire Management. The Eru Top Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Modesty Panel Is Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. The Understructure Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. The Pedestal Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. There Shall Be 2 Nos. Of Drawer Units I.E., 1 Nos. Under Main Table & 1 Nos. Under Eru, Where Drawer Fronts Shall Be Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. Overall Size Of The Back Unit Shall Be 1800Mm ( L ) X 500Mm ( D ) X 1800Mm ( H ) . The Top Panel Shall Be Made Of 25 Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc Membrane Pressed On To Top. The Slide Door Unit Shall Be Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping For Body Panels Like Side, Bottom, Back And Shelves. The Shutters Shall Be Made Of 25 Mm Thick Mdf One Side Pre-Laminated Board With 0.4Mm Pvc Membrane Pressed On To Top. Shutters Shall Have A Soft - Closing & Anti-Slam Mechanism. Handles Shall Be Provided For Ease Of Opening. Storage Shall Be Provided With Lock For Security. Certifications: The Product Should Be Certified With Greenguard ( Ul ) , Iaq Gold & Green Pro And The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 2 Nos 2 Providing And Placing In Position Back Unit Credenza. Overall Size Of Unit: 2350Mm ( W ) X 500Mm ( D ) X 750Mm ( H ) . It Shall Be Made Of 25Mm Thick Mdf – One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4 Mm Pvc Membrane Pressed On To Top. The Slide Door Unit Is Made Of 25 Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Edge Banded With Matching 2 Mm Thick Pvc Lipping. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Storage Is Provided With Lock For Security.Certifications: The Product Should Be Certified With Greenguard ( Ul ) , Iaq Gold & Green Pro And The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 2 Nos 3 Providing And Placing In Position Of Mid Back Revolving Chair. The Seat Shall Be Made Of 1.4 + / -0.1 Cm Thick Hot Pressed Plywood Upholsterd With Fabric And Moulded Polyurethane Foam. It Shall Have Seat Depth Adjustment Of 5.0 + / - 0.3 Cm Integrated In The Seat Through A Sliding Mechnism. Seat Size Shall Be 50.0 Cm W X 49.0 Cm D. The Back Shall Be Injection Moulded In Glass Filled Polyamide Which Shall Be Upholstered With Mesh Fabric. The Back Shall Consist Adjustable Lumbar Support Made Of Injection Moulded Polypropylene Having An Adjustment Of 6.0 + / - 0.1 Cm. Back Size Shall Be 50.0 Cm W X 68 .0 Cm H. The Polyurethane Foam For Seat Shall Have A Density Of 55 + / - 5 Kg / M³. The Height Adjustable Armrest Shall Be Made Of Polyamide Structure And Polypropylene Housing With Moulded Pu Armtop Having An Adjustment Of 7.0 + / - 0.3 Cm. The Mechanism Shall Be Dsigned With Following Features -: 360º Revolving Type, Centre Tilt Syncro Mechanism, 3 Position ( Inclusing Upright Lock ) Giving Option Of Variable Tilt Angle To The Chair With Anti Shock Feature. The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 8.5 + / - 0.3 Cm. The Pedestal Shall Be High Presssure Die Cat Aluminium And Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Shall Be 65.0 + / - 0.5 Pitch Centre Dia. The Twin Wheel Castors Shall Be Injection Moulded In Black Glass Filled Polyamide Having 6.0 + / - 0.1 Wheel Dia. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 6 Nos 4 Providing And Placing In Position Of One Seater The Overall Size Of Sofa Is 670Mm X 835Mm X 850Mm . The Frame Of Sofa Is Made Of Solid Wood With Colour Finish Cappuccino. The Stitching: Thread Of Sofa Is Made Of Polypropylene Leather, Pu German Leather Bn 3592. The Legs Of Sofa Is Made Of Soild Rubber Wood. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards.The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 2 Nos 5 Providing And Placing In Position Of 3 Seater Sofa. Overall Size: Total Length-1760Mm, Total Height-850Mm, Total Width-835Mm. The Frame Of Sofa Is Made Of Solid Wood With Colour Finish Cappuccino. The Stitching: Thread Of Sofa Is Made Of Polypropylene Leather, Pu German Leather Bn 3592. The Legs Of Sofa Is Made Of Soild Rubber Wood. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards.The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 1 Nos 6 Providing And Placing In Position Of Center Table. Overall Size: Width : 1000Mm, Depth : 650Mm, Height : 430Mm. Table Materials: Glass Of 8 Mm Thk Tempered, Solid Rubber Woood Legs And Frame, Ms Sheet As Bottom Shelf. Decoration Materials & Specifications: ( Density / Type ) : Pu Coating To The Rubber Wood Parts, Clear Glass. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 1 Nos 7 Providing And Placing In Position Of High Back Revolving Chair. Seat: The Cushioned Seat Is Made Of Injection Moulded Plastic Outer And Inner. Plastic Inner Is Upholstered With Pure Leather And Moulded High Resiliance Polyurethane Foam, Seat Size: 476Mm W X 492Mm D. Back: The Back Is Cushioned And Made Up Of Pu Foam With Insitu Moulded Ms Erw Round Tube Of Size, Upholstered With Pure Leather. Back Size: 475Mm W X 770Mm D. Armrest: The Armrest Top Is Moulded From Polyurethane, Upholstered With Pure Leather And Mounted On Ot A Drop Lift Adjustable Type Tubular Armrest Support Made Up Of Ms Erw Tube Having Chrome Plated Finish. The Armrest Hieght Adjustable Upto 65Mm In 5 Steps. The Adjustable Tilting Mechanism Shall Be Designed With The Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Contionuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Options Of Variable Tilt Angle To The Chair, Seat / Backtilting Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is 60Mm. Adjustable Back Support: Back Frame Is Connected To The Up / Down Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 74Mm For The Comfortable Back Support To Suit Individual Need. Height Adjusment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 100Mm. Pedestal: The Pedestal Is High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 650Mm Pitch Centre Dia. Twin Wheel Castors: 5 Nos. Twin Wheel Castors Are Injection Moulded In Plastic Having 60Mm Wheel Diameter And Assembled To Pedestal. Certifications: The Product Should Be Certified With Greenguard ( Ul ) , Iaq Gold, Bifma Level- 2 & Green Pro And The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 1 Nos 8 Providing And Placing In Position Of Medium Back Revolving Chair. Seat: The Cushioned Seat Is Made Of Injection Moulded Plastic Outer And Inner. Plastic Inner Is Upholstered With Pure Leather And Moulded High Resiliance Polyurethane Foam, Seat Size: 476Mm W X 492Mm D. Back: The Back Is Cushioned And Made Up Of Pu Foam With Insitu Moulded Ms Erw Round Tube Of Size, Upholstered With Pure Leather. Back Size: 465Mm W X 595Mm D. Armrest: The Armrest Top Is Moulded From Polyurethane, Upholstered With Pure Leather And Mounted On Ot A Drop Lift Adjustable Type Tubular Armrest Support Made Up Of Ms Erw Tube Having Chrome Plated Finish. The Armrest Hieght Adjustable Upto 65Mm In 5 Steps. The Adjustable Tilting Mechanism Shall Be Designed With The Following Features : 360° Revolving Type, Front-Pivot For Tilt With Feet Resting On Ground And Contionuous Lumbar Support Ensuring More Comfort, Tilt Tension Adjustment Can Be Operated In Seating Position, 5-Position Tilt Limiter Giving Options Of Variable Tilt Angle To The Chair, Seat / Backtilting Ratio 1:2, The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Shall Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment: Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is 60Mm. Height Adjusment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 100Mm. Pedestal: The Pedestal Is High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 650Mm Pitch Centre Dia. Twin Wheel Castors: 5 Nos. Twin Wheel Castors Are Injection Moulded In Plastic Having 60Mm Wheel Diameter And Assembled To Pedestal.Certifications: The Product Should Be Certified With Greenguard ( Ul ) , Iaq Gold, Bifma Level- 2 & Green Pro And The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 6 Nos 9 Providing And Placing In Position Of 3 Seater Sofa. Overall Size: Width: 2310Mm, Depth: 975Mm, Height: 930Mm. Seating Height : 460Mm, Upholstery Material : Fabric Pvc, Shade : Ash Grey, Frame Material : Combination Of Plywood And Pine Wood. Plywood Thickness : 12 Mm ( Moisture Resistance And Termite Free ) Pinewood Cross Section ( Without Knots ) . Moisture Content : 10 -12 % Foam. Seat Material : Slab Stock Foam, Density: Base 28 Kg / M3 And Super Soft 32 Kg / M3 At Top. Back Material: Slab Stock Foam, Density: Super Soft Foam Of 32 Kg / M3 .Mechanism At Headrest: Hittech Make Which Can Be Adjusted At Three Levels. Webbing: Elastic Belt With Pocket Spring Of Diameter 2Mm. Legs: Ms Pipe With Metallic Powder Coated. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 1 Nos 10 Providing And Placing In Position Of 1 Seater Sofa. Overall Size: Width: 1010Mm, Depth: 975Mm, Height: 930Mm. Seating Height : 460Mm, Upholstery Material : Fabric Pvc, Shade : Ash Grey, Frame Material : Combination Of Plywood And Pine Wood. Plywood Thickness : 12 Mm ( Moisture Resistance And Termite Free ) Pinewood Cross Section ( Without Knots ) . Moisture Content : 10 -12 % Foam. Seat Material : Slab Stock Foam, Density: Base 28 Kg / M3 And Super Soft 32 Kg / M3 At Top. Back Material: Slab Stock Foam, Density: Super Soft Foam Of 32 Kg / M3 .Mechanism At Headrest: Hittech Make Which Can Be Adjusted At Three Levels. Webbing: Elastic Belt With Pocket Spring Of Diameter 2Mm. Legs: Ms Pipe With Metallic Powder Coated. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards.The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 2 Nos 11 Providing And Placing In Position Of Center Table. Overall Size: 740Mm ( W ) X740mm ( D ) X 500Mm ( H ) . The Table Contains Drawer Beneath The Worktop. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards.The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 1 Nos 12 Providing And Placing In Position Of Center Table. The Top Shall Be Made Of Which Shall Be 12+ / -0.3Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. It Shall Be A Welded Assembly Made In Ss202 Grade Having Dia. 12+ / -0.04 As Per Is:1762. Overall Dimensions Of Table Shall Be Width Of Table- 1120 Mm, Depth-600 Mm, Height-351 Mm. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards.The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 1 Nos 13 Providing And Placing In Position Of 3 Seater Sofa. Overall Size : Width-2060 Mm And Depth-92.0 Cm, Seat Height - 450 Mm, Height - 820Mm. The Upperstructure Shall Be A Single Shell 1.2 ±0.1Cm. Thick Hot Pressed Plywood. Dia 4Mm Zig-Zag Type Assembly Is Mounted In The Understructure For Support And Additional Cushioning Purpose. The Seat Is Made Up Of Pu Foam With Density 32+ / -2 Kg / M3 Having An Additional Top Layer Of Pu Foam With Density 28+ / -2 Kg / M3, Upholstered With Fabric Or Leatherette. The Back Is Made Up Of 28+ / -2 Kg / M3 With Additional Top Layer Of Pu Foam With Density 23+ / -2 Kg / M3, Upholstered With Fabric Or Leatherette. The Leg Is A Welded Assembly Made Up Of Stainless Steel ( Grade Ss 202 ) Tube And Plate. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards.The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 1 Nos 14 Providing And Placing In Position Of 1 Seater Sofa. Overall Size : Width-860 Mm And Depth-920 Mm, Seat Height - 450 Mm, Height - 820 Mm. The Upperstructure Shall Be A Single Shell 1.2 ±0.1Cm. Thick Hot Pressed Plywood. Dia 4Mm Zig-Zag Type Assembly Is Mounted In The Understructure For Support And Additional Cushioning Purpose. The Seat Is Made Up Of Pu Foam With Density 32+ / -2 Kg / M3 Having An Additional Top Layer Of Pu Foam With Density 28+ / -2 Kg / M3, Upholstered With Fabric Or Leatherette. The Back Is Made Up Of 28+ / -2 Kg / M3 With Additional Top Layer Of Pu Foam With Density 23+ / -2 Kg / M3, Upholstered With Fabric Or Leatherette. The Leg Is A Welded Assembly Made Up Of Stainless Steel ( Grade Ss 202 ) Tube And Plate. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards.The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 2 Nos 15 Providing And Placing In Position Of Revolving Chairs, Back Size: 455 Mm ( W ) X 530 Mm ( H ) * Seat Size: 485 Mm ( W ) X 470 Mm ( D ) . Seat / Back Assembly: The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene Insitu Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Used In Seat And Back Cushion Is Moulded In Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf As Per 15:7888 For 25% Compression. Tilt Mechanism, Spines & Spine Connector: The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The 5 Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Am ) De Form The Back-Spine Structure Involved In Multi-Dimensional Recline Motion.The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Feature Which Is Inbuilt In Seat Base And The Tension ( Return Force ) Is User Weight Dependent.Adjustable Armrests: The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glassfilled Poly-Amide. The Height Adjustment Feature Is Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Is Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide. Pneumatic Height Adjustment: The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cm. Pedestal Assembly: The Pedestal Is Injection Moulded In Glass-Filled Poly-Amide And Fitted With 5 Nos. In Wheel Castors. The Pedestal Is 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors. Twin Wheel Castors: 5 Nos. Twin Wheel Castors Are Injection Moulded In Poly-Amide Having 5.0±0.1Cm Heel Diameter And Assembled To The Pedestal. Certifications: The Product Should Be Certified With Bifma Level-2, Greenguard ( Ul ) , Iaq Gold & Green Pro And The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 9 Nos 16 Providing And Placing Of High Back Revolving Chair. The Seat Shall Be Made Of 1.4 + / -0.1 Cm Thick Hot Pressed Plywood Upholsterd With Fabric And Moulded Polyurethane Foam. It Shall Have Seat Depth Adjustment Of 5.0 + / - 0.3 Cm Integrated In The Seat Through A Sliding Mechnism. Seat Size Shall Be 50.0 Cm W X 49.0 Cm D. The Back Shall Be Injection Moulded In Glass Filled Polyamide Which Shall Be Upholstered With Mesh Fabric. The Back Shall Consist Adjustable Lumbar Support Made Of Injection Moulded Polypropylene Having An Adjustment Of 6.0 + / - 0.1 Cm. Back Size Shall Be 50.0 Cm W X 68 .0 Cm H. The Polyurethane Foam For Seat Shall Have A Density Of 55 + / - 5 Kg / M³. The Height Adjustable Armrest Shall Be Made Of Polyamide Structure And Polypropylene Housing With Moulded Pu Armtop Having An Adjustment Of 7.0 + / - 0.3 Cm. The Mechanism Shall Be Dsigned With Following Features -: 360º Revolving Type, Centre Tilt Syncro Mechanism, 3 Position ( Inclusing Upright Lock ) Giving Option Of Variable Tilt Angle To The Chair With Anti Shock Feature. The Headrest Shall Be Injection Moulded In Glass Filled Polypropylene Which Shall Be Upholstered With Foam And Fabric. It Shall Have An Adjustment Of 6.0 + / - 0.1 Cm And It Shall Be Assembled Over The Full Back Chair. The Headrest Shall Be Provided With A Provision Of Coat Hanger. The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 8.5 + / - 0.3 Cm. The Pedestal Shall Be High Presssure Die Cat Aluminium And Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Shall Be 65.0 + / - 0.5 Pitch Centre Dia. The Twin Wheel Castors Shall Be Injection Moulded In Black Glass Filled Polyamide Having 6.0 + / - 0.1 Wheel Dia. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 4 Nos 17 Providing And Placing In Position Of Visitor Chair. The Seat Assembly Shall Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Shall Be Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Dimensions Of Seat Shall Be 47.0 Cm. ( W ) X 48.0 Cm. ( D ) . The Back Asembly Shall Be Made Of Powder Coated ( Dft 40-60 Microns ) Tubular Frame Of Dia 2.54 ±0.03Cm. X 0.2±0.016Cm Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Shall Be Upholstered Using Net Fabric With High Tenacity Yarn. The Dimensions Of Back Shall Be 46.5 Cm ( W ) X 60.5 Cm ( H ) . The Hr Polyurethane Foam Shall Be Moulded With Density =45+ / -2 Kg / M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The One-Piece Armrests Shall Be Injection Moulded From Black Co-Polymer Polypropylene. The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Shall Be Cantilever Type & Made Of Dia 2.54±0.03Cm X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. Certifications: The Product Should Be Certified With Iaq Gold & Green Pro And The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 16 Nos 18 Providing And Placing In Position Of 3 Seater Bench With Arms And Cushion. Overall Size: 1830Mm ( W ) X 670Mm ( D ) X 775Mm ( H ) X 400Mm ( Sh ) . Seat / Back Shell: It Is Powder-Coated Perforated Shell Made From Cold Rolled M.S. Sheet ( Din1623 Part1 St-12 Grade ) 0.15 0.013 Cm Thickness. The Side Bar Is Made Of Chrome Plated Solid Steel 3.0 ± 0.03 Cm X 1.2 ± 0.3 Cm With Fluting And Plastic Inserts. The Shell Is Assembled On The Cross Beam With Help Of M-8 Bolts ( Per Seat - 8 Nos. Seat To Bracket And 4Nos. Bracket To Cross Beam ) . Cross Beam: It Is Made Up Of Black Powder Coated Rectangular M.S. Erw Tube Having 8.0 ± 0.03Cm X 4.0 ± 0.03Cm X 0.2 ± 0.014Cm Size. Leg And Armrest: It Is Chrome Plated Made Of Cold Rolled Steel With 0.12 ± 0.013Cm Thickness. Cushion: The Seat And Back Cushion Are Made Up Of Pu Foam Uphostered With Leather Cloth Or Fabric With Plywood. Certifications: The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge. 1 Nos 19 Providing And Placing In Position Of Steel Almirah. Overall Size Of Almirah: 916Mm ( W ) X 486Mm ( D ) X 1980Mm ( H ) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Certifications: The Product Should Be Certified With Greenguard ( Ul ) , Iaq Gold & Green Pro And The Company Should Be Certified With Iso 9001, 14001, 45001, 50001, Aiota, Greenguard ( Ul ) & Bifma Standards. The Material Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer In Charge Total Quantity : 60
