Tender For Repair And Renovation Of Dispensary Building To Accommodate Munsif Court At Kundah Lower Camp
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jan 2023
0 days left
EMD
31000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kundah → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Of Dispensary Building To Accommodate Munsif Court At Kundah Lower Camp
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the existingRR wall including cost of all materials, leads lifts, curing labour chargesetc. complete. |
| 2 | Dismantling the existing flooring concrete for constructing of cross wall |
| 3 | Earthwork excavation for foundation in hard stiff clay stiff black cotton hard red earth sales murum gravel stoney earth and earth mixed with small size boulders and hard gravelly soil with an initial lead etc. Complete |
| 4 | For Levelling the site |
| 5 | For Foundation |
| 6 | Laying PCC 1:3:6 using 20mm metal for foundation concrete including cost of all materials, leads lifts, curing labour chargesetc. complete. |
| 7 | Laying PCC 1:2:4 using 20mm metal including cost of all materials, leads lifts, curing labour chargesetc. complete. |
| 8 | Placing RCC 1:2:4 using 20mm metal for roof including cost of cement, M.Sand, leads lifts consolidation, curing, shuttering etc, complete but excluding cost of reinforcement |
| 9 | Supplying and placing of Reinforcement with MS/RTS rod including cutting bending, tying and placing in position cost of binding wire etc. complete. |
| 10 | Brick work in cement mortar 1:5 using class II chamber burnt bricks, M. Sandfrom approved quarry and using cement of approved make including cost of all materials leads lifts etc. Complete |
| 11 | Plastering with CM 1:3, 12 mm thickusing P. Sandfrom approved quarry and using cement of approved make including cost of all materials leads lifts etc. complete. |
| 12 | Supplying and fixing of best quality country wood doors 30mm thick with all necessary fittings and fasteners etc. complete as per specification including cost of all materials leads, lifts etc. complete. as directed by the Engineer in charge |
| 13 | Supplying and fixing of solid PVC door shutters using 19 gauge 19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock an bottom rails.The steel tubes shall be covered with 5mm thick solid PVC paneling shall rigidly fixed in position including necessary fittings.The over all size of styles shall be 50mm x 30mm.The overall size of top rail, lock rail and bottom rail shall be 75mm x30mm .The overall size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter including cost of all materials leads lifts etc. Complete |
| 14 | UPVC WINDOW : Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm x 58mm shutter profile are reinforcement with GI/1mm 125gsm and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm.the epdm rubber (black colour) covered with over all the edges of frame and shutter, the shutter will be provided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work including removal of existing damaged windows. |
| 15 | Supplying and laying vitrified floor tiles of size 600 x 600 x 8mm of approved colour, shade, quality and make (Kajaria/somany) and laid in cement mortar 1:3 of 20mm thick and the top pointed with white cement mixed colour pigments including cost of tiles, cement,labour charges, all lead and lift, etc.,complete complying with standard specification. |
| 16 | UPVC VENTILATOR: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1MM 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm.the EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations free pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from theExecutive Engineer before use on work including removal of existing damaged ventilators. |
| 17 | Providing and paving with non slippery Ceramic tiles over cement mortar 1:3, 20mm thick and pointed with colour/white cement including cost of chipping and roughening the surface, cost of all materials, leads, lifts etc. complete. |
| 18 | Dadooring the walls with glazed tiles of size 15cmx15cmx6mm laid in cement mortar 1:2 10mm thick and pointing with white cement using 0.40kg/m2 including finishing the joints and pointing with side surface etc. complete. |
| 19 | Supplying and fixing ofWater closet with \"P\" or \"S\" trap with double flapped seat and seat cover with brass hinges and 10 litre capacity porcelain low level flushing tank with all internal fittings including cost of all materialsleads labour charges etc. complete |
| 20 | Providing and laying of JSW sheet roof with rectangular hollow steel section for placing in position over GI vertical supports for car parking |
| 21 | Painting two coats with ready mixed plastic emulsion of first class quality paint and of approved colour over a priming coat for interior surface of the building, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris putty, wherever required cost of all materials leads lifts etc. complete as per the instruction of Engineer at site. |
| 22 | Painting two coats with ready mixed plastic emulsion of first class quality paint and of approved colour over a priming coat for exterior surface of the building, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris putty, wherever required cost of all materials leads lifts etc. complete as per the instruction of Engineer at site. |
| 23 | Painting two coats with ready mixed floor paintof first class quality paint and of approved colour for the flooring of the building, including thorough scrapping, clean removal of dirt, etc complete and including cost of all materials leads lifts etc. complete as per the instruction of Engineer at site. |
| 24 | Painting with 2 coats of ready mixed paint of approved colour and quality of old iron works including priming coat, thorough cleaning and scrapping of the entire existing old surface, cost of brush, cleaning, cost of all materials scaffolding charges, labour leads liftsT&P etc complete |
| 25 | Supplying and fixing ofFalse ceiling including cost of all materials, lead, lifts labour etc. complete |
| 26 | Painting with two coats of enamel paint for new wood work including thorough cleaning and scrapping of the entire wood,including priming coat cost of brush, cleaning, cost of all materials scaffolding charges, labour leads liftsT&P etc complete |
| 27 | Painting with two coats of enamel paint for old wood work including thorough cleaning and scrapping of the entire existing old wood,including priming coat cost of brush, cleaning, cost of all materials scaffolding charges, labour leads liftsT&P etc complete |
| 28 | Reconditioning and Replacing the existing damaged glasses of the windows provided at various rooms with new 4mm thick pin headed glass of approved quality as directed by the Engineer at site including cost of glass, glass putty, all labour charges for lifting and fixing in position of glass panels, disposing the broken glassess to the nearest dustbin, transporting charges all lead etc. complete |
| 29 | Supplying laying aligning of GI pipes in position of approved quality including cutting bending threading cost of pipe specials, wooden plugs with all leads lifts etc. complete. |
| 30 | GI pipes 20mm dia |
| 31 | GI pipes 15mm dia |
| 32 | Supplying and fixing of wheel valves of 50mm dia including cost of all materials leads lift etc complete |
| 33 | Supplying and fixing in position of chromium coated bib cock 12mmdia |
| 34 | Wash Hand basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP waste coupling, Rubber plug and chain, 32mm dia ‘B’ class GI Waste pipe, 15mm dia GM Wheel valve, 15mm dia Nylon connection, 15mm Brass Nipples, 15mm CP Pillar Tap etc.including cost of all materials leads lifts etc. complete |
| 35 | Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated copper cable of 1100 V grade in suitable conduit pipe on wall and ceiling with PVC accessories and with 150 mm x 100 mm x 63 mm TW switch box for 15 A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point including cost of all materialsleads labour charges etc. complete |
| 36 | Wiring with 2x1.5mm2 (22/0.3)PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5 amp. 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point including cost of all materials, leads, labour charges etc. complete |
| 37 | Supply and run of 2 x 1.5 sq.mm (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour including cost of all materialsleads labour charges etc. complete |
| 38 | Supplying and fixing of single box type 4’ 40W flu fitting with copper choke and condenser with flu tube with PVC unsheathed copper conductor from terminal to the fitting |
| 39 | Supplying and filling of M.Sand upto required depth in the bottom of sand bed including levelling and consolidating the surface neatly, cost of all materials, labour charges, lead, lifts etc. complete |
| 40 | Supplying transporting and layingof 80mm thick paver block of colour, size and shape approved by the departmental officers confirming to standard specifications over the consolidated sand bed of 200mm thick.The compressive strength of pavers should not less than 40 kg/cm2 including cost and conveyance of all materials, cutting finishing the stones and using mechanical vibrator for levelling all leads lifts etc. complete |
| 41 | Providing and fixing of gate at entrance with MS angles, plates and other iron works etc including painting etc. complete |
| 42 | Providing sewage line with 160mm dia PVC pipe 6kg/cm2 including cost of earth work, laying charges with cost of pipes and specials all lead, lift etc. complete |
| 43 | GST for bidders within TamilNadu |
| 44 | SGST |
| 45 | CGST |
| 46 | GST for bidders outside TamilNadu (IGST) |
AI Tender Summary
Tender Timeline
Jan 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender