Tender For Replacement Of Rising Main Lis Sharog In Gp Kotla In Tehsil Suni Distt. Shimla Hp
Tender Value
7.22 Lakhs
Estimated cost
Bid Submission
31 Jan 2023
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Replacement Of Rising Main Lis Sharog In Gp Kotla In Tehsil Suni Distt. Shimla Hp P-L-J 150 Mm Dia Api X 42 Pipe And Gi Pipe In Rising Main.
BOQ
| Sl. No. | Item Description |
| 1 | Description of item |
| 2 | Excavation in foundation, trenches ( for pipes & pits) upto all depths in all classification of earth work such as pick work, jumper work, saturated soil includingbailing and pumping out water, blasting soft/ hard rock or chieselling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides,leveling of beds to correct grade i/c shoring /strutting , planking, timbering & dewatering wherever required, stacking the useable & unuseable material /soil separately & after laying jointing & testingof pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposoitedlayer by ramming & watering & then disposing of all surplus excavated soil /unusablematerial as directed with in all leads & lifts including restoration unmetalled surfaces to its original condition & including cost of diversionfor traffic, night signals, fixing caution boards, crossingover trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per directions of engineer-in-charge .(0.80+ 0.60 /2 x0.75 )X (200)= 200 Rmt x0.525 =315 Cumx 80 % = 84.00 Cum |
| 3 | Providing , LayingJointing & Testing of plain ended MSERW Pipe with steel grade YST - 210 confirming to IS 3183-2007 of thickness as mentioned and grade designation with bevelled edge and capable of withstanding required test pressure in a random length 4 - 7mtr i.e. testing and commissioning and cost of jointing with butt welding as per relevant BIS specification (leak proof ) i/c cost of bends tail pieces tees , reducers , increaser etc. as per site condition nd zinc coating as per IS 4736-1986 or latest with up todate ammendments . the Laying shall confirm to BIS 5822 - 1970 or latest with up to date ammendments as per directions of Engineer - Incharge (Earth work to be measured and paid for separately including all leads and lifts and carriage of miterial at site.) |
| 4 | RD lengthNominal diaclass of pipe tablewall thick- |
| 5 | 0-200 200 150 mm API.X42 --- 4.8 |
| 6 | Providing , Welding and Fixing of M.S. Flanges ISI marked conforming to IS : 6392-1971 capable of with standing the test pressure of 1.60 N/mm2 welded on both sides with the pipe complete with nut & 3 mm thcikferrado gasket . The welding is conforming to IS : 3183-1986. including hydraulic testing at site and painting with anticorreshive pasint in side and outside confirming to relevant specfication . the work shell be done including all leads and lifts as per entire satisfaction of Engineer - in - Charge. |
| 7 | RD lengthNominal diaclass of pipe tablewall thick- |
| 8 | 0-200 200 150 mm API.X42 28 |
AI Tender Summary
Tender Timeline
Jan 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender