Tender For Construction Of Naibat Office Temisgam. (Under Sdp)
Tender Value
1 Crore
Estimated cost
Bid Submission
07 Feb 2023
0 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khaltsi → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Naibat Office Temisgam. ( Under Sdp )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil. |
| 2 | Earth work in excavation by mechanicalmeans (hydraulic excavator )over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50m, disposal earth to be leveled and neatly dressed. All kinds of soil 80% |
| 3 | b) Ordinary Rock 20% |
| 4 | Dumping stone excluding cost of stone on horizontal level. |
| 5 | Providing and laying in position cement concrete of specified grade including curing and cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including cost and carriage of cement Complete Job |
| 6 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah Including cost and carriage of cement Complete Job |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing and cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost and carriage of cement Complete Job |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. Including cost and carriage of steel. |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 10 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete Including cost and carriage of cement Complete Job |
| 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood. |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of requiredsize with necessary screws 35mm |
| 13 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood 35mm |
| 14 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With 2nd class teak wood beading 62x19 mm |
| 15 | Providing and fixing Ornamental traditional Shingtsak over doors and windows Complete Job |
| 16 | Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete.Second class Teak Wood 12 mm thick |
| 17 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat.12.25.1 With common burnt clay (non modular) brick tiles of class designation 10.0 |
| 18 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 50 mm thick with 20mm nominal size stone aggregate.Including cost and carriage of cement |
| 19 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) Including cost and carriage of cement |
| 20 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) Including cost and carriage of cement |
| 21 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 22 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer) |
| 23 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 24 | 20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) Including cost and carriage of cement |
| 25 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 26 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 27 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Raj Nagar plain |
| 28 | Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 meter |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown |
| 31 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 32 | Providing and fixingwater closet (English type W.C pan) with 100mm iron P or S trap , 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:W.C. pan with lSI marked white solid plastic seat and lid. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. |
| 33 | Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, Kingstone/Gem/Techno/ Parko/Jaguar , 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous ChinaWash basin size 550x400 mm with a pair of 15 mm C. P.brass pillar taps pillar taps (Including waste coupling approved quality) |
| 34 | Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040mm bowl depth 250mm |
| 35 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge.18 mm thick |
| 36 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm |
| 37 | Providing and fixing brass bib cock of approved qua1ity. 15 mm nominal bore |
| 38 | Providing and fixing elbow of approved make 50mm dia |
| 39 | Providing and fixing plain bend of required degree:100 mm dia. |
| 40 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge all fitting complete Job25mm |
| 41 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge all fitting complete Job32mm |
| 42 | Providing and fixing Urinal Pot approved Brand Complete Job |
| 43 | Providing and fixing of CP jali superior quality. |
| 44 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 250x10 mm |
| 45 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm |
| 46 | Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete. Second class Teak Wood 20 mm thick |
| 47 | Providing and fixing double glazed units (DGU) comprising 8mm thick glass on either side with 10mm thick inert gas gapin the DGUs shall be processed from reputed glass processors. The type of glass toughed and 90% |
| 48 | Providing and fixing factory made UPVC (approve make quality)colour as directed by the site Engineer) casement/casement cum fixed glazed windows comprising of UPVC multi-chmabred frame, sash and mullion (wherever required) extruded profiles duly reinforced with 1.60=0.2mm thick galvanized mild steel section made from roll forming process of required length (shape and size according UPVC profile ) , UPVC extruded glazing beads of appropriate dimension,EPDM gasket,stainless steel(SS 304 grade) friction hinges,zinc alloy(white powder coated)casement handles,G.I fasteners 100x 8mm size for fixing frame to finished wall,plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners,mullion(if required)shall be also fusion welded including drilling of holes for fixing hardware\"s and drainageof water etc. Arter fixinf frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality all complete as per approved drawing and direction of Engineer in charge. (Single/double glass panes and silicon sealant shall be paid saperately) Casement window single panel with S.S friction hinges 400x19x1.9mm) made of big series frame 67x60mm and sash 67x80mm both having wall thickness of 2.3=0.2mm and single glazing bead/double glazing bead of appropriate dimension (Area of window above 0.75sqm) |
| 49 | Providing insullation works on PPR pipe by way of using K-Flex 25mm dia and 13mm thickness withtapping and heat tape of approved quality denforse or equivalent 33watt/mtr (Complete Job) |
| 50 | Providing and fixing insullation work for PPRusing k-flex 19mm thick 32mm dia including tapping, glass wool, chicken mesh, polythene, aluminium sheetand heat tape of approved quality denforse or equivalent 33watt/mtrComplete Job |
| 51 | Providing insullation for water storage tank by way of using Nitrale sheet 25mm thick, glass wool 50mm thick,chicken mesh, polythene, and aluminium sheet.(Complete Job) |
| 52 | Carriage of material from source to site of work by Mechnical Transport including loading unloading and stacking.a) Sand an avg lead 20Km |
| 53 | b) Stone aggregate an avg lead 20Km |
| 54 | c)Stone an avg lead 15km |
AI Tender Summary
Tender Timeline
Jan 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedFeb 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender