Municipal Corporation-MC has published Tender For Construction And Redevelopment Of Bemc Nua Bandha, Gosaninuagan. Submission Date for this Tender is 04-02-2023. Civil Work Tenders in berhampur Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work excavation in all kinds of soil within initial lead of 50 m. And initial lift of 1.5 m. including rough dressing and leveling the bed |
2 | Single under reamed pile foundation with RCC M25 using 20 mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel. |
3 | Filling in foundation with sand well watered & rammed including cost,conveyance,royality & taxes etc. complete to work site |
4 | Filling in foundation & plinth with excavated materials or moorum including watering ramming as per the direction of O.I.C |
5 | C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
6 | C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
7 | Pile cap |
8 | R.C.C. Column / Beam ,Ground Floor |
9 | R.C.C Roof Slab, Ground Floor |
10 | R.C.C. Staircase ,Ground Floor |
11 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge ( Taking output - 1MT ) |
12 | Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. |
13 | 12mm thick C.P.(1:6) on RCC Surface & brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
14 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royaltyof all materials, cost of all labour,etc complete as per the direction ofE.I.C. |
15 | Supplying, fixing, fitting & erecting of GRC Railing as per the design of Architect or Enginner incharge. Etc complete |
16 | Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C. |
17 | Fixing tiles in dados on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
18 | Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles. Per 1sqm |
19 | Full Body Tiles |
20 | Granite |
21 | Finishing wall surface with two coat of Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. |
22 | Priming one coat with any approved primer for 9.3 sqm andtwo coats with plastic emulsion paint of approved shade on new work to give an even shed. |
23 | Wall painting 1 Coat of Primer with 2 uniform coats with weather coat paint of approved shade on new work to give an even shade |
24 | Supply, fixing, fitting & erecting of MS work as per the measurements & drawings by Architect or Engineer in Charge. |
25 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. |
26 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength,thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compactionby using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking andLanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-30 grade With approved colour design Pattern(Post G. S.T) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail