Military Engineer Services-MES has published Tender For Repairs To Flooring Certain Rcc Eorks Plastering Leakage Seepage Joineries Replacement Of Ac Sheet And False Ceiling Aluminium Works Plummbing Guniting And External Periodical Services And Internal Wiring To Certain Otm/Tech Areas At Af St. Submission Date for this Tender is 15-02-2023. Electrification Work Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Jan-2023 | Amendment1 | Other | 08-02-2023 |
| 2 | 08-Feb-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-02-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of stone slabs andtiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness ( below or above ground level) complete all as specified and as directed. |
| 3 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified. |
| 4 | M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified. |
| 5 | M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified. |
| 6 | M&L for Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed. |
| 7 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 8 | M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.16 Sq.m, laid in floors with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles and levelingthe floor with PCC 1:2:4 type B0 of required thickness if required to maintain slope etc. complete all as specified and as directed. |
| 9 | M&L for First quality, Non skid ceramic coloured7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles complete all as specified. |
| 10 | All as per item No 09above but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as directed by Engr-in-charge. |
| 11 | M & L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 300x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. |
| 12 | Supply and fixing, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessories, rubber packing, required screws andPVC rawal plugs as required complete all as specified and as directed. |
| 13 | M&L for Preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed. |
| 14 | M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash up to 4 mtr height. complete all as specified and as directed. |
| 15 | M&L for preparation of new plastered surfaces and apply two coat of oil bound distemperover a coat ofprimer, complete all as specified and as directed. |
| 16 | Supply and fixing in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and as directed. |
| 17 | Supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and as directed. |
| 18 | M&L for complete removal of existing treatment by scraping down completely on brick wall/concrete surfaces thoroughly, washing, rubbing down with water cleaning the surface upto the entire satisfaction of Engineer-in-Charge and includingopening ofexisting cracks , filling up of "V" cracks with epoxy expandable putty to required depth, making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 inclnecessary filling and applyingof Birla whiteputty on entire surfacesto obtain/achieve smooth even surfaces with using sand paper and applying two coat of exterior emulsion paint 100% acrylic of approved colour and shade by accepting officers over and including a coat of primer as per manufacturers instructionscomplete all as specified and as directed by Engineer-in-Charge. including necessary scaffolding upto 4th floor. |
| 19 | All as per srl item No 18above but without complete removal and applyingone coat of exterior emulsion paint 100% acrylic of make given in item No 18 above on old decorated surface includingopening ofexisting cracks , filling up of "V" cracks with epoxy expandable putty to required depth , making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4, including necessary form work upto 4th floor. complete all as specified and as directed. |
| 20 | M&L for complete removal of existing treatment by scraping down completely on brick wall/concrete/plasteredsurfaces thoroughly, washing, rubbing down with water cleaning the surface upto the entire satisfaction of Engineer-in-Chargeand a primer coat of " cemprover of M/S Snocem on entire surfaces and filling the cracks/depression/holes etc by putty as directed and making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 thanapplying two coat of cement base paint coating of approved colour and shade by accepting officers on walls upto 4th floor complete complete all as specified and directed by Engineer-in-Charge.including necessary form work upto 4th floor. |
| 21 | M&L for complete removal of existing treatment by scraping down washing rubbing down with water and cleaning the surface up to the entire satisfaction of Engineer-in-Charge and includingopening ofexisting cracks , filling up of "V" cracks with epoxy expandable putty to required depth, making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 applying two coat of oil emulsion over 2 to 3 mm thick birla putty punningcomplete all as specified or as directed by Engineer-in -Charge. |
| 22 | M&L for Preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping downsmoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applyingone coat of white wash up to 4 mtr height , complete all as specified and as directed. |
| 23 | M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying onecoat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed.(Note-Payment shall be made for one coat only ) complete all as specified and as directed. |
| 24 | M&L for Preparing old painted surfaces of steel and iron surfaces over 10 cm width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc , filling in crevices and cracks etc with approved fillerand applying One coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Taking down steel tubing 15mm bore and connections including cleaning for refixing or removing to stores completeall as specified and directed by Engineer - in – Charge. |
| 26 | All as per Srl Item No 25 here in before but 20mm bore all as specified and directed by Engineer - in - Charge. |
| 27 | S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed. Note : Cutting chases as required shall be measured and paid separately. |
| 28 | S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed. Note : Cutting chases as required shall be measured and paid separately. |
| 29 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, including removal of rubbish outside MoD land complete all as specified. |
| 30 | S & F in repairs Ist quality vitreous china wash basin, white, flat back, size 550x400mm, PVC connections suitable for hot and cold water,bottle trap (with internal partition) 32 mm size with 300mm &190mm long wall connection pipes & wall flange,and fixing with brackets/bolts including cutting and pinning in etc complete all as specified and directed by Engineer - in – Charge . |
| 31 | All as above in item No 30 abovebut fixing only. |
| 32 | Supply and fix in repairs PVC (SWR) floor trap with dia of outlet75mm, with CP gratingwith hinge in kitchen and bath etcsituation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and as directed. |
| 33 | Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out from trenches 100 / 75 mm bore (sand cast) all as specified and as directed by Engineer - in - Charge . |
| 34 | M&L for, 100mm dia PVC (SWR) pipes single socketed, in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and as directed. |
| 35 | M&L for, 100mm dia PVC (SWR) pipes single socketed, in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and as directed. |
| 36 | M&L for , 75mm dia PVC (SWR) pipes single socketed, in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and as directed. |
| 37 | M&L for, 75mm dia PVC (SWR) pipes single socketed, in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and as directed. |
| 38 | S & F 100mm bore PVC (SWR) bends, diminishing pieces or tapers all as specified and as directed by Engineer - in – Charge. |
| 39 | S & F 75mm bore PVC (SWR) bends, diminishing pieces or tapers all as specified and as directed by Engineer - in – Charge. |
| 40 | Supply and fix VitreousChina wash down water closet"constellation premiumwhitecolourcomplete set incl cistern with lid cover fixed in repairs, including connection to wate pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed by Engineer - in -Charge. |
| 41 | Dismantling Asbestos cement sheets (corrugated ,semi corrugated etc) in roof coverings incl ridges etc complete all as specified and as directed. |
| 42 | M&L for Pre-painted galvatume aluminum zinc coating GI based corrugatedsteel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsallas specified and as directed. |
| 43 | M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete , sub base all as specified and as directed by Engineer - in - Charge |
| 44 | M & L for 40 mm thick Cement Conrete1:2:4 type B–1 using 20mm graded stone aggregates inflooring laid in alternate panel of sizes as directed andfinished even and smoothusing extra cement all as specified and as directed by Engineer - in – Charge . |
| 45 | Supply only liquid waterproofing compound complete all as specified and as directed. |
| 46 | Dismantling/removingold damaged worn out APP of any thicknessincl screed bed or plastering of anythickness and removing the rubbish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete all as specified and as directed. |
| 47 | M&L for , 15 mm thickcement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by weight of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately. |
| 48 | M&L for Cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified. |
| 49 | M&L for, water proofing treatment of roof consisting as under:- (a) Applyinga tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and as directed. |
| 50 | All as per Srl item No. 49.00here-in-before but on vertical surfaces, using hot blown bitumen having penetration value 30/40 applied1.20 Kg/ Sq.m over primer @ 0.30 litre/ Sq.m, complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F in repairs vitreous china squatting pan, "Orissa"pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron "P" or "S" trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and as directed. |
| 52 | Supply and fix VitreousChina wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), fixed in repairs, including connection to waste pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed by Engineer - in -Charge. |
| 53 | S&F Rotational moulded polyethylene water storage tank 500 liters capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings , including taking down existing tank complete all as specified and as directed. |
| 54 | S&F Rotational moulded polyethylene water storage tank 1000 liters capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms, including all fittingsincluding taking down existing tank complete all as specified and as directed. |
| 55 | S & F in repairs 10 liters capacity, PVC valve less, symphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed. |
| 56 | S&F in repairs 15mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge. |
| 57 | S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge. |
| 58 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 59 | S&F in repairs SS Grating 100 mm dia with or without waste hole of brass chromium plated fixed on floor/ nahani trap with cement mortar, fixed in repairs, complete all as specified and as directed. |
| 60 | S & f in repairs bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 61 | S & F in repairs Pillar taps (Single Touch type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe and pillar tab complete all as specified and as directed. |
| 62 | S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 63 | Demolition of brick masonry built in cement mortar as in drain etc., complete all as specified. |
| 64 | M&L for Brick masonry with sub class B bricks straight or curved on plan exceeding 6m mean radius, built in Cement Mortar (1:4)all as specified and as directed. |
| 65 | S&F false ceiling with exposed GI system using “SILHOUETTE XL 15 mm (Nominal) designer Grid "Armstrong"white or Global white with black reveal and 600 x 600 x 15 mm thick prime fine fissured micro look white/coloured tiles (superfine 15mm/silhouette). Making necessary framework for AC ducting, if any and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level and incl dismantling old undervicable false ceillingcomplete all as per manufacturer’s instructions and as directed. |
| 66 | M&L for averaging 1-2mm thick putty and applying one coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 67 | Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed by Engineer - in – Charge. |
| 68 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each andall as specified and as directed by Engineer - in - Charge. |
| 69 | Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified and as directed by Engineer - in - Charge . |
| 70 | S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part –I, Section 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified and as directed by Engr inCharge. |
| 71 | S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and as directed by Engineer - in - Charge. |
| 72 | S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single sideprelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single sideprelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying andfixing in the frame at site as per specification complete all as specified and as directed by Engineer-in-Charge. |
| 73 | S&F Factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of5 mm thick plain colour PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical member & minimum 02 Nos. for horizontal member), complete all as specified. |
| 74 | S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and as directed by Engineer - in – Charge . |
| 75 | S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250mm all as specified and as directed by Engineer - in - Charge . |
| 76 | S & F mild steel, 300mm, ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer - in - Charge. |
| 77 | S & F mild steel pressed handles oval type, stove enamelled black 125mm size all as specified and as directed by Engineer - in - Charge . |
| 78 | S & F SS butt hinges, medium weight100mm size all as specified and directed by Engineer - in - Charge . |
| 79 | S & F pressed steel door frames with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified size of frame 125 x 60mm all as specified and as directed by Engineer - in - Charge . |
| 80 | M&L for Cement concrete 1:3:6 type C–1 filling of pressed steel frame and hold fast blocks etc all as specified and as directed by Engineer - in - Charge. |
| 81 | M&L for Cutting hole in brick wall built in cement mortar exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B – 1 all as specified and directed by Engineer - in - Charge. |
| 82 | S & F mild steel as in framed work as in doors or gates of angles or other sectionetc. complete, drilled for fixing of steel sheeting or other covering.Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive for steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing incl MS hinges ,handles ms sheets 0.63 mm thick complete Fe 410-0 all as specified and as directed by Engineer - in - Charge. |
| 83 | M&L for, Gunniting to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 5 mm thick in CM mortar 1:3all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately. |
| 84 | Supply only TMT steel bars for reinforcement in required length and dia, complete all as specified and as directed. |
| 85 | Supply only welded steel wire fabric, weight not exc 4kg/sqm, complete all as specified and as directed. |
| 86 | S&F powder coated aluminium frame work fordoors, windows,partition s etc incl grill for windows for windows etc with one or more rebated section incl jointing cleats for fixingetc complete all as specified and as directed. |
| 87 | S&F powder coated anodised aluminium door shutters, partition wall, aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubber neoprene packing, handles two Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and as directed. |
| 88 | S&F powder coated anodised aluminium window and ventilator shutters , side hung type without sash bars aluminium section weighting 0.55 Kg/Rm incl necessary joining cleats glazing clips rubberpacking, aluminium anodised snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1Nos0, hinges type B-21 100 mm long(2Nos) suitable handles (1Nos)complete all as specified and as directed. |
| 89 | S&F 12mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work complete.all as specified and as directed by Engineer - in - Charge . |
| 90 | S&F 5.5 mm thick selected quality tinted sheet glass and glazing clip in square fixed with PVC/neoprene gasket in aluminium frame work compelte. all as specified and as directed by Engineer - in - Charge . |
| 91 | S&F double action floor spring hydraulic regulated made up of min 1.25 mm thick aluminium sheet foundation box, main body with stainless steel cover, govering pivets made of brass, other part made up of mild steel heavy duty complete. all as specified and as directed by Engineer - in - Charge . |
| 92 | S&Fbrass six lever dead lock suitable for aluminium doors manufactured by Harrison Locks or Godrej as approved by GE complete all as specified and as directed. |
| 93 | Taking down aluminium door shutter of any size upto 4 Sqm each and replacement of defecting pivot with new pivot & refixing in position complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Taking down aluminium door shutters of any size upto 4 Sqm each replacement of defecting floor spring with new floor spring complete all as specified and as directed. Make : Amar/Sandhu. |
| 95 | S&F in repair dead lock6 lever brass for aluminium door shuttercomplete all as specified and as directed by Engineer-in-Charge. |
| 96 | Taking down old broken glass from aluminium door, window or partition panel by removing glass clips and S&F glass ordinary 5.0mm thick in any size and refixing the glass clips in position after replacing rubber gasketcomplete all as specified and as directed by Engineer-in-Charge. |
| 97 | S&F in repair Hydraulic door closer for aluminium door shutter complete all as specified and as directed by Engineer-in-Charge. |
| 98 | M&L for18-20 mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry @ 3Kg/Sqm, laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishingincl dismantl ing damaged stone slab of any description complete all as specified and as directed. |
| 99 | M&L for, machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. |
| 100 | Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed. |
| 101 | S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. |
| 102 | S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. |
| 103 | Taking down old steel windows & S&F ECO-4000 Series windows/ventilators (Double rebate) fabricated from roll framed sections made of galvanized steel colour coated/powder coated ( Base steel as per IS 513"D" quality galvanized as per IS 277 with Zinc of 120gms/Sqr.mtr) with total coated thickness of 0.6mm and section of frame should be of 72mm x 55mm ,section for mullion should be of72mm x 50mm, section for shutter frame should be of 47mm x 20mm, section for fixed glass bead should be of 12mm x 12mm and section for fly mesh should be of 40mm x 20mm, coated section should be withprimer coat of Epoxy primer of 5-7 microns thick,finish painted with polyester paint of 12-16 microns thick or powder coated with pure polyester upto to 50-60 microns thick including 5mm thick plain glass, stainless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch and Grill made of 10mm Sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat (total grill unitshould be powder coated and fixed to window frame with screws). |
| 104 | (a) FIXING DETAILS :-Section for frame Glazed shutters and Mesh shutters should be cut to length and miter joined with polypropylene corner brackets,mullion section should be joined with Frame/Mullion using Mullion Cap ethyl propylene damein monomer (EPDM) gasket should be used all around glass in shutter and fixed glass,rubber Gasket should be used around glass in shutter and fixed glass.Rubber gasket should be used around fly mesh to fix mesh in mesh shutter. (b) ACCESSORIES :- Each glazed shutter and mesh shutter should be provided with SS pivot hinges - 1 set, seccolor handle & seccolor stay. Window frame should be fixed to brick/concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frame. Make :- NCL alltek and seccolor Ltd and Eqivalent. |
| 105 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified. |
| 106 | M&L for providing precast reinforcement cement concrete (1:2:4) type B-1 using 20mm graded aggregate in man holes covers slabs/ Shelves as in slabs supported on walls, beams and columns, in floors, roofs, landings, deck slabs and in shelves and like including necessary form work, complete all as specified and as directed by Engr-in-Charge. |
| 107 | M&L for Preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer to wood surfaces over 10 cm in width or girth not otherwise described, complete all as specified. |
| 108 | M&L for Preparation of new steelsurfaces & apply 2 coat of synthetic enamel paint over a coat of red oxideover 10cm in width or girth not otherwise described, complete all as specified. |
| 109 | S&F in repairmild steel framed work such as grills, gratings, cooler stand, brackets for sunshed etc with end bars of shouldered and or riveted or gorged into spikes, framed guard bars, barred iron doors, ladders frmamed balusters, walkways, rialings and similar work confirming to Fe-290 Gde E-165 complete all as specified. |
| 110 | S&F in repair PVC profile for wall panelling of size 23cm wide, 8mm over all thick and 01mm wall thickness incl necessary PVC "L" shape for closing fixed with screw to mild square tubular steel frame work made out of MS Hollowsection of size 25mm x 15mm x 2mm spacing 01 meter on both side frame work shall be fixed in wall with the help rawl plug and required length of screws and MS work shall painted with one coat of Red oxide primer for wall panelling complete all as specified and as directed. |
| 111 | M&L fordouble charged vitrified tiles 9 to 10mm thick (square/rectangular)in any pattern area of each tiles not exceeding 0.36 sqm, in floors/skirtingetc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specifiedand as directed. |
| 112 | M&L for two coat of Bitumen Silver Paintincl prepration of newly or previously untreatedAPP membrane surfaces , complete all as specified and as directed by Engr-in-Charge. |
| 113 | S&F in repairfactory made uPVC texturecolour (wood finish) casement (openable)window area made of extrudedprofiles with wall thickness of 2.0mm (+/0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm),sash (60mmx73mm),T profile (One vertical length in between two shutters) (60mmx74mm) Glazing bead(35x20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket 1.2 + -0.2 mm thick galvanized steel frame (28mmx21.5mm) sash (31mmx27.5mm)"T" profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners.Hardware : [ casementhandle made of zinc alloyed (while powder coated) Butt hinges of zinc alloyed (white powder coated) transmission gear made of mild steel with multi point locking system)and 5mm thick glazing with selected quality glass complete all as specified. Note : Glass shall be measured and paid separately however cost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose. |
| 114 | S&F in repairfactory made uPVC texture colour (wood finish) casement (Open-able) door made of extruded profile with wall thickness of 2.0mm (+/- 0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm) T profile (One vertical length in between two shutters) (60mmx71mm) Glazing bead corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket + -0.2 mm thick galvanized steel frame (28mmx21.5mm) "T" profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [ three track window/ door handle made of zinc alloyed (while powder coated) Corner strikers: cylinder, Door transmission gear made of mild steel with multi point locking system with strikes, 3D hinges of zinc alloyed (white powder coated)] and 5mm thick glazing with selected quality glass complete all as specified. Note : Glass shall be measured and paid separately however cost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose. |
| 115 | S&F 6mm thick tempered glass in uPVC door and window shutters /frame(for fixed window) complete all as specified and as directed |
| 116 | S&F frosted lamination inrequired design over toughened/floatglass incl making logo or design as approved complete all as specified. (Note: for measurement full size of glass shallbe measured). |
| 117 | M&L for 300mm x300mm x 10mm vitrified industrial (Endura) tilein floor set and jointed in set &jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in cement mortar 1:6 complete all as specified. |
| 118 | Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) completeincluding all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & as directed. |
| 119 | M & L for replacement of concealed point wiring complete with PVC insulated and unsheathedFRLS cable of 1.5 sqmm (nominal area) with multistranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia,with MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm multistranded copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified anddirected for the followings :- |
| 120 | One light / fan point controlled by one way switch |
| 121 | One 5 Amp socket outleton independent board. |
| 122 | One5 Amp socket outlet on same board. |
| 123 | One bell/buzzer point controlled by one bell push |
| 124 | One light point controlled by two 2-way switch |
| 125 | All as per above item No-118 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed,FRLS cable for 15 Amp socket outleton independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified andas directed. |
| 126 | M&L for replacement of point wiring in casing caping/PVC conduit (not less 20 mm) on sufraces of wall/ceiling floor etc complete with PVC insulated and unsheathedFRLS cable of 1.5 sqmm (nominal area) with multistranded copper conductor single core 1100 volts grade in and includingPVC conduit , with mild steel terminal boxes (not less than 1.6 mm thick ) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dollywith3mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm multistranded copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etccomplete all as specified and as directed for the followings :- |
| 127 | One light / fan point controlled by one way switch |
| 128 | One 5 Amp socket outleton independent board. |
| 129 | One5 Amp socket outlet on same board. |
| 130 | One bell/buzzer point controlled by one bell push |
| 131 | One light point controlled by two 2-way switch |
| 132 | All as per above item No 120 here in befor but using 2.5sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for15 Amp socket outleton independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified andas directed. |
| 133 | M & L for replacement ofpoint wiring in existing conduit (PVC/Steel) surface / concealed includingexisting MS Terminal boxeswith1.5 sqmm FRLS PVC insulatedmulti stranded copper conductor cablesingle core 1100 volts gradeand one run of 1.5 sqmm multistranded copper conductor cable of green colouras continuous earth wireand laminated sheet cover 3 mm thick on terminal box duly fixed including taking out old u/s wire of any type and size complete all as specified and as directed for the followings :- |
| 134 | One light / fan point controlled by one way switch |
| 135 | One 5 Amp socket outleton independent board. |
| 136 | One 5 Amp socket outleton same board. |
| 137 | One bell/buzzer point controlled by one bell push |
| 138 | Ditto all as per above item No 122 but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant ( FRLS ) cable for15 Amp socket outleton independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed. |
| 139 | S&F in replacement switch piano type 5 amp one way ISI Marked complete all as specified and as directed by Engineer-in-Charge. |
| 140 | S&Fin replacement switch piano type15 Amps one way ISI Marked complete all as specified and as directed by Engineer-in-Charge. |
| 141 | S&F in replacement socket outlet 3 pin 5 Amps flush type complete all as specified and as directed by Engineer-in-Charge. |
| 142 | S&F in replacement socket outlet 2-in-1, 3 pin 5 amp and 15 amps complete all as specified and as directed. |
| 143 | S&F in replacement socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and as directed. |
| 144 | S&F in replacement socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and as directed. |
| 145 | S&F in replacement switch 6 amps modular type one one way complete all as directed. |
| 146 | S&F in replacement switch 16 amps modular type one one way complete all as specified and as directed. |
| 147 | S&F in replacement electronic fan regulator Step type complete all as specified and as directed. |
| 148 | S&F in replacement bell push flush type 5 amp one way ISI Marked complete all as specified and as directed. |
| 149 | S&F in replacement modular type bell push 6 amp one module ISI Marked complete all as specified and as directed. |
| 150 | S&F in replacementBell, DING DONG AC 230 Volts single pole type complete all as specified and asdirected. |
| 151 | S & F in replacement ofLamp holder bakalite type with back plate suitable for batten fittingscomplete all as specified as directed |
| 152 | S&F in replacement of ceiling rose surface bakelite 63 x50mm three terminals completeall as specified and asdirected. |
| 153 | S&F in replacement of enviroment friendly indoor decorative 20 Watt LED polycarbonate Batten with opal diffuser including all accessaries all as specified and as directed. |
| 154 | S&F in replacement of enviroment friendly indoor decorative 10 Watt LED mirror light polycarbonate Battenwith opal diffuser including all accessaries all as specified and as directed. |
| 155 | S & F in replacement of sub main wiring with PVC insulated, fire retardant (FRLS), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn into existing / newconduit of any size and type/ casing-caping with and including one run of2.5 sqmm multistranded copper conductorsingle core PVC insulated, unsheathed cable of green colouras continuous earth wire including lugs etcconnected and tested complete all as specified and as directed. Note: (i) New conduit/ casing- caping andaccessories shall be measured separately. (ii) Two runs of 4.0 sqmm cable and one run of 2.5 sqmm cable of earth continuity conductorshall be a unit length. |
| 156 | S & F in replacement ofsub main wiring with PVC insulated, fire retardant (FRLS), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 6.0 sqmm (Nominal area) drawn into existing / newconduit of any size and type/ casing-caping with and including one run of4.0 sqmm multistranded copper conductorsingle core PVC insulated, unsheathed cable of green colouras continuous earth wire including lugs etcconnected and tested complete all as specified and as directed. Note: (i) New conduit/ casing- caping andaccessories shall be measured separately. (ii) Two runs of 6.0 sqmm cable and one run of 4.0sqmm cable of earth continuity conductorshall be a unit length. |
| 157 | S & F in replacement ofRegid non-metallicPVCconduit25 mm(external dia) ISI marked (on surface) incl of all accessories and all fittings such as Tees bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers lock nuts, saddles, pipe hook etccomplete all as specified and as directed. |
| 158 | S&F in replacement of sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 12 ways 240 V complete all as specified and as directed . |
| 159 | S&F in replacement of sheet metal enclosure double door suitable for SPN distribution boards when MCBs to be used having 200Amp rated bus bar 8 ways 240 V complete all as specified and as directed. |
| 160 | S&F in replacement of sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 4 ways 240 V complete all as specified and as directed . |
| 161 | S&F in replacement of single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 10-32 complete all as specified and as directed. |
| 162 | S&F in replacement MCB SP 5 to 32 Amps,240 volts curve "C",breaking capacity 10KA, complete all as specified and as directed. |
| 163 | S&F in replacement MCB SPN5 to 40 Amps,240 volts,curve "C", breaking capacity 10 KA, complete all as specified and as directed. |
| 164 | S&F in replacement MCB SPN50 to 63 Amps,240 volts,curve "C", breaking capacity 10 KA, complete all as specified and as directed. |
| 165 | S&Fin replacement of1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4 mm GI suspension wire one twin core cable flat or circular of size 10 Sq mm to be connected to existingMCB box / Main switches complete all as specified and as directed. |
| 166 | S & F In replacement ofmodular switch 2 way, 6 Amp,1 module ISI Marked complete all as specified and as directed. |
| 167 | S & F in replacement ofmodular Fan Regulator fan step regulator,120W-2 module ISI Marked complete all as specified and as directed. |
| 168 | S & F In replacement ofPiano type switch 2 way, 5 Amp,1 module ISI Marked complete all as specified and as directed. |
| 169 | S&F in replacement ofmodular blanking plate, 1 module ISI Marked complete all as specified and as directed. |
| 170 | S&F in replacement metal flush box 1/2 module all as specified and as directed. |
| 171 | S&F in replacement metal flush box 3 module all as specified and as directed. |
| 172 | S&F in replacement metal flush box 6 module all as specified and as directed. |
| 173 | S&F in replacement metal flush box 8 module all as specified and as directed. |
| 174 | S&F in replacement metal flush box 12 module all as specified and as directed. |
| 175 | S&F in replacement for white cover plate with frame, 1/2 module complete all as specified and as directed. |
| 176 | S&F in replacement for white cover plate with frame, 3 module complete all as specified and as directed. |
| 177 | S&F in replacement for white cover plate with frame, 6 module all as specified and directed. |
| 178 | S&F in replacement for white cover plate with frame, 8 module complete all as specified and as directed. |
| 179 | S&F in replacement for white cover plate with frame, 12 module complete all as specified and as directed. |
| 180 | S&F in replacement ofHylem sheet 12"x15" complete all as specified and as directed. |
| 181 | S&F in replacement of Hylem sheet 8"x5" complete all as specified and as directed. |
| 182 | S&F in replacement ofHylem sheet 5"x5" complete all as specified and as directed. |
| 183 | Supply and fixing in repair ofEarthing to panel with galvanised steel earth plate electrode60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead 32 x 6 mm galvanised iron strip by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point includingexcavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and as directed. |
| 184 | M&L for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G Istrip 25x 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 40 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing complete all as specified and as directed. |
| 185 | M&L for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G Iwire 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 15 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing on complete all as specified and as directed. |
| 186 | Supply and fixing in repair TPN DB"s 8 way vertical type 415 V, double door suitable for housing of 125 Amps MCCB as main incoming complete all as specified and as directed. |
| 187 | All as per item No. 171 above but of 4 way and suitable for housing of 100 A/63 A MCCB as main incomingcomplete all as specified and as directed. |
| 188 | S & F MCCB 125 Amps capacity, 4 pole, 25 KA, fixed thermal and magnetic release complete with extended terminals to be fixed in 8 way TPN DB complete all as specified and as directed. |
| 189 | All as per item No. 173 above but capacity 100 Amps, fixed thermal and magnetic release, 4 Pole, 25 KA suitable to be fixed in 4 way TPN DB complete all as specified and as directed. |
| 190 | Supply and fix in replacement double door TPN DBs 4 wayof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral & DB"s will be fitted concealed in wall / surface as per site required complete all as specified and as directed . |
| 191 | S & F in replacement with MCB TPN 32amps 10 KA ,c-series including connection with suitable size aluminium / copper lugs complete all as specified and as directed . |
| 192 | S & F in replacement with MCB TPN 50 to 63 amps 10 KA ,c-series including connection with suitable size aluminium / copper lugs complete all as specified and as directed . |
| 193 | S & Fin replacement with MCB TPN 100amps 10 KA ,c-series including connection with suitable size aluminium / copper lugs complete all as specified and as directed. |
| 194 | S & F in replacement enviroment friendly recess/pendent mounting LED flat panel 2"x2" fabricated CRCA sheet steel housing cool white with high efficient LEDs & glare free opal diffuser (34 W) PF>0.95 driver life >25000 Hours, operating range 140v to 280 V includingall accessaries complete all as specified and as directed. |
| 195 | Taking down electric energy meter of any size and type and deposite to MES store yard complete all as specified and as directed. |
| 196 | Supply and fixing in replacement microprocessor based three phase electronic tamper proof energy meter of rating 10 to 40 Amps,AC 415 Volts, 50 Hz covered with toughened glass coverwith optical comunication port confirming to IS 13779 complete all as specified and as directed |
| 197 | Supply and fixing in replacement microprocessor based single phase electronic tamper proof energy meter of rating 10 to 60 Amps,AC 240 Volts, 50 Hz covered with toughened glass coverwith optical comunication port confirming to IS 13779 complete all as specified and as directed |
| 198 | Supply and fixing in replacement microprocessor based single phase electronic tamper proof energy meter of rating 10 to 40 Amps,AC 240 Volts, 50 Hz covered with toughened glass coverwith optical comunication port confirming to IS 13779 complete all as specified and as directed |
| 199 | Taking down old metallic energy meter box of any size and type complete all as specified and as directed. |
| 200 | S&F in replacement of Energy meter Box Flame retardent polycarbonate body including all fixing arrangement like DIN rails mounting plate connection boxes fastning screw protection plate extra suitable to accomodate 3 Phase energy meter. the meter box shall be of SIze 450x300x214mmwith locking arragement complete all as specified and as directed. |
| 201 | All as per Item No 185 Above But to accomodate single phase energy meter of Size 300x300x170mm complete all as specified and as directed. |
| 202 | S & FWall fan ofsingle phase 230/240V of size 400 mm sweep and grouting withnut , bolts & Fastenaron the wall and make good the disturbed surface and electric connection with 1.5 Sqmmthree core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and as directed by Engr-In - Charge. |
| 203 | Supply & fixfans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and as directed. |
| 204 | Supply & fix exhaust fans heavy duty 300 mm dia 1400 RPM, 50 Hz 230 volt for domestic use,dynamically balance blade , epoxy powder coated confirm to IS 2312-1967 with ISI marking IP-55 with class B insulation motor including suitable size louver and all fixing accessories such as fastners nut bolts and electric connection with 3 core cablecomplete all as specified and as directed. |
| 205 | Supply and fix in replacement Exhaust fan 380 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply , complete all as specified and as directed. |
| 206 | Supply and fix in replacement Exhaust fan 450 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply , complete all as specified and as directed. |
| 207 | S&F in replacementenviroment friendly,ultra modern,energy saving surface mounted decorative 10 Watt LED bulkhead fitting with pressure die cast aluminium housing ,high efficient LEDs with opal diffuser and IP65 protection complete all as specified and as directed. |
| 208 | S&F in repair fluorescent tube light fitting flameproof type FLP - WP of T5 1 X 28 watt including integral reflector made of alluminium alloy LM6 with electronic ballast , bipin holders , connector block etc and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor with suitable size including 28 watt rod and all necessary fixing accessoriescomplete all as specified and as directed. |
| 209 | S&F in repair switch flame proof rotary type with terminal box in LM6 , 16 amps SINGLE POLE 250 volts and all necessary fixing accessoriescomplete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
