New Okhla Industrial Development Authority-NOIDA has published Tender For Development Of And Maintenance Of Village (Construction Of Cc Road And Drain In Village Gurja Daireen And Kambakshpur Balance Gali) Noida. Submission Date for this Tender is 23-01-2023. Road Work Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Construction of Subgrade & Earthen Shoulders Construction of Subgrade & Earthen Shoulders with Approved material obtained from borrowpitswith all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300.2 |
2 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move) For Building work only as in item 251 (a) above but machincal meancs for road work. |
3 | Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & Cement in the proportion of 8:4:1 in foundation and under floor including supply of all materials, labour, Tools & plants etc.required for proper completion of the work. |
4 | M-150 Brick Work in 1:4 Cement & Coarse sand of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
5 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) |
6 | 12 mm cement plaster of mix 1:4(1 cement: 4 coarse sand) |
7 | Neat Cement punning |
8 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (4.1) 400-1) B By Mix in Place Method |
9 | Providing and laying of Plain Cement Concrete in Open Foundation Complete as per Drawing and Technical Specifications PCC Grade M-15 using batching plant transit mixer & manual placing |
10 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately.Cement concrete prepared with batch mixing machine |
11 | Supply of Tractor trolly on hire basis with Driver including fuel,lubricant etc complete. |
12 | Supply of Beldar |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail