|
| 1 | Earth work in excavation by manual/ mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead up to 50m and lift up to 1.5m as directed by Engineer-in-charge Item no 1/ 2.9 b c (ii) MPWD SOR (bldg) 2021-22 |
| 2 | b) In ordinary rock |
| 3 | c) In hard rock |
| 4 | (ii) Blasting prohibited |
| 5 | Providing soling with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.Item no 2/ 12.5 b (i) MPWD SOR (bldg) 2021-22 |
| 6 | b) Stone soling |
| 7 | i) 100mm |
| 8 | Plain cement concrete works in foundation bed for footing steps, walls, brick works etc. below plinth level as directed and specified including dewatering if necessary and curing complete (shuttering where necessary shall be measured and paid separately).2Item no 3/5.1 (c)MPWD SOR (bldg) 2021-22 |
| 9 | c) 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) |
| 10 | Supplying, fitting and fixing in position reinforcement bars up to 1st floor level, conforming to relevant I.S Code for R.C.C work/R.B walling including straightening, cleaning, cutting and bending to proper shapes and length as per detalis, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) Item no 4/6.11 MPWD SOR (bldg) 2021-22 |
| 11 | b)High Yield Strength Deformed Bars or Tor Bars |
| 12 | Shuttering/Formwork Centering and shuttering including strutting, propping etc., and removalItem 5/4.1,4.3,4.4 & 4.5 MPWD SOR (Bldg) 2021-22 |
| 13 | 4.1 Foundations, footings, bases of columns, etc. for mass concrete (using steel). |
| 14 | 4.3 Slabs, roofs, landings, balconies and access platform, shelves (using steel). |
| 15 | 4.4 Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel) |
| 16 | 4.5 Columns, Pillars, Piers, Abutments, Posts and Struts. (using steel)valve |
| 17 | 6.1 (b) Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level Item no.6/6.1(b),6.2 (b) & 6.3 (b) MPWD SOR (Bldg) 2021-22 |
| 18 | b)M20 or 1:1.5:3 (1 cement:11/2 coarse sand:3 graded stone aggregate 20mm nominal size) |
| 19 | 6.2 (b) Reinforment cement concrete work in walls (any thickness),including attached pilasters, buttrsses,fillets, coloumns, pillars, posts and struts etc.above plinth level up to first floor level, excluding cost of centering, shuttering,finishing and reinforcement |
| 20 | b)M20 or 1:1.5:3 (1 cement:11/2 coarse sand:3 graded stone aggregate 20mm nominal size) |
| 21 | 6.3 (b) Reinforced cement concrete work in beams, slabs, roofs having slope up to 15o, landings, balconies, shelves, chajjas,lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to 1st floor level, excluding the cost of centering, shuttering,finishing and reinforcement. |
| 22 | b) M20 or 1:1.5: 3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20mm nominal size) |
| 23 | Brick work with common burnt clay modular 1st class bricks in foundation and in plinth: Item no. 7/7.2(a) MPWD SOR (Bldg) 2021-22 |
| 24 | a) Cement mortar 1:4 (1 cement: 4 Coarse sand ) |
| 25 | Earthwork in filling (excluding rock) in trenches, plinth,sides of foundation etc in layer not exceeding 20 cm thick including breaking of clods, consolidating each layer by ramming and watering, lead up to 50m and lift up to 1.5 m.Item no. 8/2.6 (a) MPWD SOR (Bldg) 2021-22 |
| 26 | a) with available excavated earth |
| 27 | Sand filling in plinth in layer not exceeding 150mm thick including breaking of clods, consolidating by ramming and watering complete as directed (maximum depth 45cm). Item no. 9/ 2.7 MPWD SOR (Bldg) 2021-22 |
| 28 | Cement concrete floor topping 1:3:6 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, complete. Item no. 10/12.10 (b)MPWD SOR (Bldg) 2021-22 |
| 29 | b) 40mm thick |
| 30 | Half brick masonry with common burnt clay (non modular) 1st class bricks in superstructure above plinth level up to first floor level.Item no.11/ 7.10 (a) MPWD SOR (Bldg) 2021-22 |
| 31 | a) Cement mortar 1:3 (1 cement: 3 Coarse sand) |
| 32 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealed) etc. as per specifications, drawings and direction of Engineer-in-charge complete. Item no.12/ 24.10 MPWD SOR (Bldg) 2021-22 |
| 33 | Providing and fixing galzing in aluminium door, window, ventilator shutters and partitions etc. with EDPM rubber/neoprene gasket etc. complete as per the architectural dawings and the directions of engineer-in-charge. Item no 13/24.3 e MPWD SOR (Bldg) 2021-22 |
| 34 | e With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 35 | 15mm cement plaster 1:3 (1 cement: 3 coarse sand) finised with a floating coat of neat cement on the rough side of single or half brick wall .Item No 14/ 15.10 MPWD SOR (Bldg) 2021-22 |
| 36 | Providing and laying polised Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectual drawing with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 ( 1 Cement: 4 Coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, etc.all complete as specified and as directed by the Engineer-in-charge. Item No.15/ 12.51 MPWD SOR (Bldg) 2021-22 |
| 37 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. Item No.16 / 16.2 MPWD SOR (Bldg) 2021-22 |
| 38 | Finishing with deluxe multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding:Item No.17 / 16.22 (a) MPWD SOR (Bldg) 2021-22 |
| 39 | a) Two or more coats applied on walls @ 1.25 ltr/10 sqm over including one coat of special primer applied @ 0.75 ltr/10 sqm |
| 40 | Supplying,fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concertrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.Item no 18/ 38.16.2 (a) MPWD SOR (Bldg) 2015-16 |
| 41 | 38.16.2) PVC PIPE of SUPREME / PRINCE? FUSION / SFMC / Brand or equivalent |
| 42 | c) 75mm diameter |
