Tender For Special Repair Of Community Centre Sector-38 West Chandigarh Sh Providing And Fixing Of Public Health Fixtures At Community Centre In Sector-38 West Chandigarh Deposit Work For B R Wing Under Capital Head Wdf.
Tender Value
6.48 Lakhs
Estimated cost
Bid Submission
23 Jan 2023
0 days left
EMD
12969
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair Of Community Centre Sector-38 West Chandigarh Sh Providing And Fixing Of Public Health Fixtures At Community Centre In Sector-38 West Chandigarh Deposit Work For B R Wing Under Capital Head Wdf.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR No.17.1.1) |
| 2 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. (DSR No.17.2.1) |
| 3 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (DSR No. 17.7.1) |
| 4 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge (DSR No. 17.16A) |
| 5 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 : 15 mm nominal bore (DSR No. 18.52.1) |
| 6 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design (DSR No. 19.2) |
| 7 | 200 mm diameter S.W. pipe (DSR No. 19.2.3) |
| 8 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design (DSR No. 19.3) |
| 9 | 250 mm diameter S.W. pipe (DSR No. 19.3.4) |
| 10 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete (DSR No. 19.1) |
| 11 | 200 mm diameter S.W. pipe (DSR No. 19.1.3) |
| 12 | 250 mm diameter (DSR No. 19.1.4) |
| 13 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR No.18.48) |
| 14 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia (DSR No. 17.28.1.1) |
| 15 | Providing and fixing of ball cock of 20 mm complete in all respects as per the entire satisfaction of Engineer in Charge. (NSI) |
| 16 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern (DSR No. 17.4.1) |
| 17 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms (DSR No. 18.63) |
| 18 | Providing and fixing brass bib cock of approved quality: 15 mm nominal bore (DSR No. 18.15.1) |
| 19 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length : 15 mm nominal bore(DSR No. 18.21.2.1) |
| 20 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357 mm(DSR No. 17.32.2) |
| 21 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 100 mm diameter(DSR No. 18.22.1) |
| 22 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms: 15 mm nominal bore (DSR No. 18.50.1) |
| 23 | Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729 (DSR No. 17.35) |
| 24 | 100 mm dia(DSR No. 17.35.1.1) |
| 25 | 75 mm dia (DSR No. 17.35.2.1) |
| 26 | Providing and fixing collar : Sand cast iron S&S as per IS - 1729 (DSR No. 17.57) |
| 27 | 100 mm diameter (DSR No. 17.57.1.1) |
| 28 | 75 mm diameter (DSR No. 17.57.2.1) |
| 29 | Providing Drip Seal Joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of dia (NSI) |
| 30 | 100 mm (NSI) |
| 31 | 75 mm (NSI) |
| 32 | Providing and fixing plain bend of required degree : Sand cast iron S&S as per IS - 1729 (DSR No. 17.39) |
| 33 | 100 mm dia (DSR No. 17.39.1.1) |
| 34 | 75 mm diameter (DSR No. 17.39.2.1) |
| 35 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms (DSR No. 17.72) |
| 36 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia nominal bore (DSR No. 18.11) |
| 37 | 15 mm dia nominal bore (DSR No. 18.11.1) |
| 38 | 20 mm dia nominal bore (DSR No. 18.11.2) |
| 39 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc : External work (DSR No. 18.12) |
| 40 | 25 mm dia nominal bore (DSR No. 18.12.3) |
| 41 | 32 mm dia nominal bore (DSR No. 18.12.4) |
| 42 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. (DSR No. 18.78) |
| 43 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore (DSR No. 18.17.1) |
| 44 | Providing and fixing brass grating of approved quality and colour Circular type: (DSR No. 18.58) |
| 45 | 100 mm nominal dia (DSR No. 18.58.1.1) |
| 46 | 125 mm nominal dia with 25 mm waste hole (DSR No. 18.58.1.2) |
| 47 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.4.1.1) |
| 48 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.30.1.1) |
| 49 | Providing and fixing of Grab rail of Stainless Steel pipe1-1/4\" and fitting of grade A ISI-304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00m spacing including cutting and making good the walls complete to the entire satisfaction of Engineer in-charge (NSI) |
| 50 | Providing and fixing of CP extension of size 15 mm. Heavy Duty complete in all respects (NSI) |
| 51 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms (DSR No. 17.71) |
| 52 | Providing and Fixing Toiletpaper holder: C.P. Brass (DSR No. 17.34.1) |
| 53 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. : Granite Stone of approved shade (DSR No. 8.10.2) |
| 54 | Providing and fixing of 1 HP water pump with help of fasteners to be fixed at site as per entire satisfaction of Engineer in charge Make : Crompton/Havells/Kirloskar (NSI) |
| 55 | Construction of brick masonry Oil and grease chamber of internal size (8\" x 8\") and chamber (4\"-6\" x 3\"-0\") with baffle wall(2\" high) for kitchen complete in all respects as per drawing to the entire satisfaction of Engineeer in Charge (NSI) |
AI Tender Summary
Tender Timeline
Jan 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 23, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender