}

Tender For Annual Maintenance And Repair Of Various Road Under Pwd Sub Division Wr 15 Under Division Wr 1 During 2022-23 Sh Providing Laying Rmc At Kachha Berm Portion And Improvement Of Adjoining Footpath To Prevent Air Pollution Control At Various, Delhi-Delhi

Public Works Department-PWD has published Tender For Annual Maintenance And Repair Of Various Road Under Pwd Sub Division Wr 15 Under Division Wr 1 During 2022-23 Sh Providing Laying Rmc At Kachha Berm Portion And Improvement Of Adjoining Footpath To Prevent Air Pollution Control At Various. Submission Date for this Tender is 24-01-2023. Road Work Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

35775724
Tender For Annual Maintenance And Repair Of Various Road Under Pwd Sub Division Wr 15 Under Division Wr 1 During 2022-23 Sh Providing Laying Rmc At Kachha Berm Portion And Improvement Of Adjoining Footpath To Prevent Air Pollution Control At Various
Open Tender
Indian
Delhi
Delhi
24-01-2023

Tender Details

Tender For Annual Maintenance And Repair Of Various Road Under Pwd Sub Division Wr 15 Under Division Wr 1 During 2022-23 Sh Providing Laying Rmc At Kachha Berm Portion And Improvement Of Adjoining Footpath To Prevent Air Pollution Control At Various Road Under Pwd Sub Division Wr 15

Key Value

Document Fees
Refer document
EMD
INR 192903.0 /-
Tender Value
INR 96.45 Lakhs /-

BOQ Items

Name of Work:A/R and M/O Various Road under PWD Sub Division WR -15 under Division WR1 during 2022-23 (SH:-P/L RMC at kachha Berm portion & improvement of adjoining Footpath to prevent Air Pollution Control at various road under pwd Sub DivisionWR-15 under Division WR-1).
Sl. No. Item Description
1Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.” Note : (1) Excess/less cement used than specified in this item is payable/ recoverable separately.
2All works upto plinth level : M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)
3Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
4Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
5Two or more coats on new work
6Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
7Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
8Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer"s specifications & direction of Engineer- in-Charge.
960mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.
10Disposal of building rubbish / malba / similar unserviceable, dismantled orwastematerialsbymechanicalmeans,includingloading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
11Add Cost Index @ 31.27% on DSR 2016 Item.
12Less @9.5% (as per GNCTD Circular)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail