Tender For Supply & Installation Of Submersible Pumping Machinery , Voltage Stabilizer,Chlorination System And Internal House Wiringfor Tube Well No.- 1 & 2 Atkundawater Supply Scheme [Block - Mangalkote]Under Cmd, Phe Dte., Dist.- Purba-Bardhaman.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jan 2023
0 days left
EMD
43000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kunda → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Supply & Installation of Submersible Pumping Machinery , Voltage Stabilizer,Chlorination system and internal House wiringfor Tube well no.- 1 & 2 atKUNDAWater Supply Scheme [Block - MANGALKOTE]under CMD, PHE Dte., Dist.- Purba-Bardhaman.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & delivery of the following Pumping machinery, Electrical accessories etc. at site.a) Submersible Pumping Machinery, directly coupled with suitable size water proof motor having following specifications.P U M PDISCHARGE ( 8.5 M3/H)H E A D (70 mtr.)S H A F T.Stainless Steel.OUTLET SIZE. 50mm. PUMP EFFICIENCY IN PERCENTAGE: Minimum 65.M O T O R(5 HP) (DOL connection)Submersible type, 3ph.50Hz, A.C.- 400Volt +10%,wet type winding, RPM-2900.Pump motor set must be BEE standard energy star rating (3-5) as per IS – 8034:2002Make-KSB/TEXMO/ Approved Make).N.B.;- (I) H/Q Characteristic Curve of pump set should be submitted before delivery. (II) Test certificate of pump & motor should be submitted during delivery & G.C. |
| 2 | b) 2.5 sq.mm.3core, water proof flat cable, suitable for above pump set. (Make-FINOLEX /GLOSTER /MESCAB /CURRENCY/Crystal /Polycab/ Approved Make) |
| 3 | c) 63 A 4 way 415 V wall mounted Busbar Chamber (make (Havels/Standard/Approved Make) |
| 4 | d) 63 A TPN Main Switch with re-wirable fuse link within sheet steel enclosure(make (Havels/Standard/Approved Make) |
| 5 | e) Supply and Delivery of 16 mm², 1.1 KV grade. 4.0 core Al Armoured XLPE conform to IS 1554/7098(part-I) 1998 (Make : Gloster /HAVELLS /MESCAB/ CURRENCY/POLYCAB/ CRYSTAL/ Approved Make) |
| 6 | Supply & delivery of following materials of best quality. a) 80mm. N.B. U.P.V.C. column pipe 7.1mm. thick having 70mm. long 8TPI threaded both side with heavy type socket & O ring biax technology with wiring lock system non corrosive high tensile having I.S.O. 9001 standard. (Make : Ashirbad/Raksha/ Approved Make). |
| 7 | i) 10ft. long (3mtrs) |
| 8 | ii) 5ft. long (1.5mtrs) |
| 9 | iii) 80mm. dia. top & bottom adaptor |
| 10 | iv) 3\" x 2\" M.S. Reducer |
| 11 | v) 3 \" dia. X 5 ft long M.S. (7.1 mm Thick) Column pipe having both side 11 TPI Thread and Socket. |
| 12 | b) Heavy type M.S. Suspension clamp of suitable dia. made of 80mm×10mm M.S. flat with nuts, bolts, washer etc.( suitable for 80mm. dia. column pipe) |
| 13 | c) Split type M.S. fabricated tube well cover for 150mm dia. tube well housing pipe with necessary fittingarrangement along with of column pipe, Air pipe, rope of anti snapping device & cable entry gland etc. |
| 14 | d) 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge. (Make: H. Guru/Febig/ Approved Make). |
| 15 | i) Tube well outside the pump house. (This cost includes 15mm. dia. G.I. pipe Tata medium of appx. 30ft. length & specials) |
| 16 | e) Depth gauge (Make: H. Guru/Febig/ Approved Make) of 102mm. dia. with steel Air pipe of reqd. length (85ft) with all others fittings & accessories for the above work including supplying in one good quality hand pump. i) Tube well outside the pump house.(This cost includes 15mm. dia. G.I pipe of appx. 30ft length & Specials) |
| 17 | f) Anti snapping safety device made of suitable size & heavy type M.S. fabricated busket for resting the above pump set, with eye bolt/H. bolt 25.mm.dia. arrangement (4 ends), clamps for holding pump motor, Nuts & bolts etc. complete as per direction EIC. including 10mm.dia. stranded steel wire rope or 16mm dia. Nylone rope for hanging of anti snapping safety device as per direction of EIC. |
| 18 | g) 80mm.dia. CIDF Non Rising Spindle Sluice Valve (IS: 14846) with PN1.0 Pressure Rating as per I.S. specification & other required materials for the job i.e for completing the construction of delivery and wash out line.(Make:- IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter/MAGNET/CAIR/McWANE/Sigma Flow/ Approved Make).N.B: I) Test certificates for both valves should be submitted at the time of delivery. II) M. S. Specials should have minimum 7mm.Thickness. |
| 19 | h) Ø80 mm CIDF single door swing Non Return Valve (IS: 5312, Part-I) with PN1.0 Pressure Rating, (Make:-IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter/MAGNET/CAIR/McWANE/Sigma Flow/ Approved Make). |
| 20 | i) 80mm dia. Three phase, (415V), Actuator operated Wafer type Butterfly Valve (BS: 5155) with PN1.0 Pressure Rating, having valve body of CI(IS: 210, Gr. FG: 260). & shaft of stainless steel (AISI- 410).(Make- Actuator- ROTORK/ CAIR/ Limitorque/Auma Valve – IVI / UPADHYA / KIRLOSKAR/Durga/ Jupiter/MAGNET/CAIR/McWANE/Sigma Flow/ Approved Make). (T.C. Needed). |
| 21 | j) Ø3 \" X 2.75 mtr CIDF Pipe |
| 22 | k) Ø3 \" X 1.0 mtr CIDF Pipe |
| 23 | l) Ø 3 \" X 2\"-6\" CIDF Pipe |
| 24 | m) Ø 3 \" X 2 ft CIDF Pipe |
| 25 | n) Ø 3 \"Flanged tail piece |
| 26 | o) Ø 3\"CIDF Bend |
| 27 | p)Steel Plug, M. S. Nipple, Flange, Nuts, Bolts etc |
| 28 | q) Ø 3 \"M. S. Cross |
| 29 | Supply, delivery & fitting fixing of wall mounted 2mm.thick, CRCA sheet steel, powder coating finish painted, dust & vermin proof, generally conforming to IP-54 Degree of protection front open fully automatic( PLC operated ) cum manual Motor Control Centre along with electrically operated valve unit complete with following components suitable for pump, 3H.P. to 7.5H.P. in DOL operating mode, Three phase Butterfly Valve Actuator, 0.5 H.P Chlorinator, Auto Lighting Arrangement & internal wiring.The panel shall be equipped by complete wiring with following devices. I. 1) Incomer a) Suitable capacity MCCB, TPN (63 Amp) (L&T/HAVELLS).b) 96Sqmm. (0-60A), Digital Ammeter with selector switch & C.T .s (AE). c) 96Sq.mm.(0 – 500 Volt) Digital Voltmeter with selector switch. (AE) d) Red, Yellow & Blue (LED type) Phase indicator lamps.- (KAYCEE) - 3nos.2) OutgoingAuto/Manual Star- Delta Starter with MPCB along with Actuator operated Butterfly Valve.a) Suitable capacity, TP, Air Break type Power Contactor with 240 Volt A. C. Coil for Pump Motor. – 3nos. |
| 30 | b) Micro Processor based Digital Motor Protection Relay with Over load, Locked Rotor & Phase Reversal/ Single Phase protection for Pump Motor. Make:BCH(BOCR-DSB)c) Electronic Stat-Delta timer 0-30sec.(range) -1no.d) Programmable logical control (PLC) with suitable i/p & o/p for sequence of automatic operation of Pump-Motor & Valves actuator with 24V D.C power supply unit-1no. e) Over Voltage/ Under Voltage Protection Relay. 1 no.f) Auxiliary Contactor & Timers for Auto Manual Control Logic.-1setg) Suitable capacity Capacitor. -1seth) TP, MCB for Capacitor back up protection.-1noi) Suitable capacity TP, Air Break Contactor for switching of Capacitor.j) Electronic ON Delay Timer for delayed switching of Capacitor. -1no.k) Auto/Manual Selector Switch.-1no.l) 6Amp, SP, MCB for Control Circuit.-1no.m) Suitable capacity contractor for forward & reversed movement of single phase actuator including overload relay. – 1 set.II. Starter for1.0 H. P. to 2.0 H. P.Chlorine Machine.a) 9Amp, TP, 240 Volt, A. C. Coil, Contactor, for Chlorinator. – 1no. |
| 31 | b)Metallic Over load Relay of Range 1.5 to 3.0 Amp for Chlorinator.c) Level Controller Circuit for Chlorine Tank.III. Yard Lighting Arrangement.a) 9 Amp, TP, 240Volt A.C. Coil Contactor -1no.b) Programmable Digital Timer for Auto/Manual operation.Note :The following 3 items ( a, b & c) are common for above I,II & IIIa) ON/OFF/ Trip Indicating Lamp for Pump Motor/Valve Actuator/Chlorinator. – 1set.b) Start/Stop, Forwarded/Reverse Push Button for Manual operation of Pump Motor, Actuator & Chlorinator. c) Power Terminals for Pump Motor/TPN Yard Lighting/ Chlorine Motor along with Level Controller/SPN internal wiring/Valve Actuator-1set. (Make: RNR/ECS/PCF Project/Jolly Engineering Pvt. Ltd./Approved Make) |
| 32 | Making Brick Pillar for Supporting pipe line (10\" X 10 \" X4 ft) by 1st class brick work with 4 :1 plaster and net cement punning complete including earth cutting, supplying necessary materials , ramming as per direction of EIC. |
| 33 | Installation of the item no. (1) to (3) with necessary connection complete including supply 12core 1.5sq.mm. copper control cable compensating MS flange nut and Bolts Gasket & other fixing materials to complete the job and making platform of required size around T.W. with bricks, cement , sand stone chips etc(4:2:1) including plastering and net cement complete as per direction and entire satisfaction of the E.I.C. |
| 34 | Supplying & fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 16Sq.mm. XLPE Armoured cables |
| 35 | Finishing the end of 16Sq.mm. 4.0 core XLPE Armoured cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials with including proper sealing of cable entry point |
| 36 | Making necessary non metalic pipe IS-14930 (80mm. dia.) protection for submersible cable from Tube well cover to inside of the pump house including supplying pipe, Elbow, Union, short piece, socket etc. complete for the job as per direction. |
| 37 | Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long and 1 x4 SWG Gl (Hot Dip) wire (4 Mts. long), 13 mm dia x80 mm long Gl bolts, double nuts, double washers incl. S & F 15mm dla Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the ground level as below: By lSl-Medium Gl pipe. |
| 38 | Extra for providing masonery enclosure on the top of theearthelectrode of overall size 86.36 cm x 86.36 cm x 46 cm deep(below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm withlocking arrangement, Gl reducer including drilling of 46 nos.12 mm dia holes on the Gl pipe. |
| 39 | Extra for treatment of soil by using salt & charcoal or coke. |
| 40 | Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with Gl saddles as required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc. |
| 41 | Supplying and fitting-fixing of earth busbar of galvanized (Hot dip) fVS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with Gl bolt,nuts,washers,spacing isolator set etc.as required Length of busbar is 0.5 mtr. |
| 42 | Supply, delivery and storage at siteof automatically controlled diaphragm type chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10Kg/CM2 with all accessories for pump & motor, foundation bolt, suction and discharge Flange and with storage tank of dosing solution of 100Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P. 3 Phase, 1450 RPM squirrel cage TEFC induciton motor, Motor will be IE2/IE3 (Make of Machine : Swelore/Any other approved, Make of Motor : ABB / CGL /KEC / Any other approved make) |
| 43 | Installtion and commissioning of above supplied chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone chips] and neat cement finish by supplyig of all required materials and testing the entire set as per direction of EIC [power will be feed from PLC Panel of pumping machinery] |
| 44 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish |
| 45 | a) average run5 mtr. - |
| 46 | Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in EI conduit and paintinga) 2x2.5 sqmm wire in 19 mm conduit incl. S&F1x14 SWG GI ECC |
| 47 | Supply and fitting fixing of 40A DP Isolator (Make : Havells/Standard) |
| 48 | Supply and delivery of LED Bulb , 20 watt, (Make-phillips/ other approvedmake) |
| 49 | Supply and fitting fixing of Ceiling fan (Make: Usha /Crompton/Havels/ other approvedmake) 1200mm. sweep complete with blade, rubber bush etc. including supply and fixing 2×1/1.4 PVC copper wire for down rod with making necessary connection complete. |
| 50 | Supply & fitting fixing of 25 watt, LED Fixture set ----------for Phillips Model no. BRP 020/10 LED (Make: Phillps/ Other Approved Make) with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C. |
| 51 | Supply of 4ft. 36W Double Fluorescent light fittings complete with all accessories including 2nos. 36W tube light incl. fixing lightfitting on wall by means L clamp, nipple, suitable size fastner and connection by 1.5 sqmm PVC/Cu wire as to G S. Model :- TMC0552XTLD36WEBT ( Make- Philips/Havells/Bajaj/ other approvedmake) |
| 52 | Supply and fixing bulkhead lightfittingson wall incl. connection. As to Gs .Make -Bajaj/Havells/ other approvedmake) |
| 53 | Supply and delivery at site A.C. 3 ph. Oil Cool type Voltage Stabilizer suitable for unbalanced input voltage with following specification. (Make: AE / Sen & Pandit / Opto Elect. / ECS /Fiji /Any Approved Make)a) Input:250-500 V, 3ph., 50HZ, 4 wireb) Output, 415V + 1% 3ph.,50HZ.c) Capacity: 10 KVA.d) Auto manual switch. IS- 9815(I)e) Raise/lower push Button.f) Single lamps to indicate and limits of input.g) Voltmeter for input and output Voltage. (Manufacturing test certificate should be produced at the time of delivery)h) With U/V.O./V.O./L protection with contractor at output side, input MCB & Ammeter etc. (TC/GC needed). |
| 54 | Supply the following Electrical Accessories at site. |
| 55 | a) 63Amp. 4 pole 415V TPN OFF load Change over Switch (Make : Standard/Havells’/ABB/Siemens) |
| 56 | b) 63A TPN Main Switch with re-wirable fuse link within sheet steel enclosure(make (Havels/Standard/Approved Make) |
| 57 | c) 16 mm², 1.1 KV grade. 4.0 core Al Armoured XLPE conform to IS 1554/7098(part-I) 1998 (Make : Gloster /HAVELLS /MESCAB/ CURRENCY/POLYCAB/ CRYSTAL/ Approved Make) |
| 58 | Installation of the above Voltage stabilizer of (Item No.-1 to 2) on the foundation incl. Interconnection complete & testing the voltage stabilizer along with other electrical equipments to ensure performance of the equipments in running satisfactorily as per IE Rules & as per direction of E.I.C. incl. testing commissioning complete. |
| 59 | Trial run as per departmental operation & guarding by engaging skilled stafffor 3 Months.[1 Operator at each pump house.]. |
| 60 | Add. GST@18% |
| 61 | Add. Cess@1% |
AI Tender Summary
Tender Timeline
Jan 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender