|
| 1 | Providing and supplying Bed with wooden headboard 75 mm thick high density U foam 48” high in 18 mm ply the edge of the pattiof the Headboard to be finished in polish and finished with 0.4” thick foam pedding upholstered with fabric of approved colour and make 77\" x 72 \" x 12\" ( LX B XH ) double bed with overall size 81”Wx73”LX40”H and with mattress Size W75”x L72”x8” thick. The box all four sides and top made of 18mm comm. ply/board finished with 3.5mm thick veneer (Greenply/Archid or equivalent) on three sides of approved colour/shade with teak wood beading on the edges finished with walnut mellamine polish (Asian or equivalent). The height of box will be 10”. The box does not have an openable lid but has side drawers with 1.0 mm laminate (Greenlam/Merino or equivalent) with telescopic runner (Hettich/Ozone or equivalent). The head board is finished in 3.5mm thick veneer in walnut polish of Melamine. |
| 2 | Providing & supplying study chair without arms of size 520x600x850mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached. The legs should be made of knot free teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved). The chair seat and backrest should be padded with polyurethane foam fully capitone upholstered fabric of de-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter. The thickness of foam should be 3\" thick having density of 40±2Kg/m3 with 1/5\" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to providedextra softness & comfort to the chair. The necessary thickness of foam should be used for cushioning of front/side approns of chair. All loose cushions and padding tobe covered with approved Upholstery with Stain and water resistant 3M coating including carriage of material within all leads and lifts |
| 3 | Providing & supplying Central Table Glass Topwith toughened Glass 8 mm thick top 200x600x425 mm teak wood specification to be approved by HPTDC |
| 4 | Providing & supplying Restaurant chair 650x550x875mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached. The legs should be made of knot free teak wood as per designer as approved finished with PU polish (Asian or equivalent or as approved). Chair back and seat Internal frame to be fixed with Heavy duty jalebi spring, padded with polyurethane foam fully caption upholstered fabric of dedecor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter. The thickness of foam should be 4\" thick having density of40±2Kg/m3 with 1/5\" soft foam on base foam (sleep well, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort the chair. The necessary thickness of foam should be used for cushioning of front/side aprons of chair. All loose cushions and padding to be covered with approved. Upholstery with Stain and water resistant 3M coating. |
| 5 | Providing & supplying 2 seaters sofa of size 1350x800x850mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached. The legs should be made of knot free teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved). The arm should be finished in 75mm thick as per design/snaps. The back should have quilting as per snaps. The sofa should have coil springs in seats and sinuous spring for backrest, padded with polyurethane foam fully upholstered fabric of de-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter. The thickness of foam should be 4\" thick having density of 40±2Kg/m3 with 1/5\" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort to the sofa. The necessary thickness of foam should be used for cushioning of front/side approns of sofa. All open area or base or invisible part of the sofa should be fully covered with base fabric. All loose cushions and padding tobe covered with approved Upholstry with Stain and water resistant 3M coating including carriage of material in all leads & lifts. |
| 6 | Providing & supplying of 1500X900x750mm pre-laminated teak ply (Greenply or equivalent) Rectangle Restaurant Table ,Table top with 1.85 mm thick PVC edge binding tape with knots free teak wood legs finished in PU polish (Asian or equivalent) as per approved colour/shade including carriage of materials within all leads and lifts all complete. The laminate to be approved by the HPTDC and the wood polish to match the laminate |
| 7 | Providing & supplying 900X900x750mm pre-laminated teak ply (Greenply or equivalent) squareRestaurant Table,Table top with 1.8 mm thick PVC edge binding tape with knots free teak wood legs finished in PU polish (Asian or equivalent) as per approved colour/shade including carriage of materials within all leads and lifts all complete.The laminate to be approved by the HPTDC and the wood polish to match the laminate |
| 8 | Providing & supplying an Ergonomic Medium Back office Chair ( 2 no’s ) is designed for comfort, to provide lumbar support, they have 360 Degree swivel base mechanism, fixed PU arm, PU base with wheel and gaslit seat height adjustment including carriage of materials within all leads and lifts of a standard approved brand |
| 9 | Providing & supplying Laminated Rectangular work table 1200 x 600 mm(LXW) workstation in size as specified and top made 25mm thick Pre-laminated MDF board.In the workstation, all the edges are sealed with 1.8mm thick PVC edge binding tape all around, Side anels/Gable Ends made of 25 mm thick Pre-laminated MDF board. All the edges are sealed with 1.8mm thick PVC Edge binding tape on the user side and 0.8 mm on the Top and Bottom Side. The side panels/gable ends have 2 glide screws/lavellers each for leveling of the desk. 300mm height Modesty Panel made from 18mm Thick Prelaminated MDF board. The pedestal unit with 2+1 drawers to be provided with table made of pre-laminated MDF board as per approved colour/shade with centrally lockable. The entire desk unit is assembled with standard fittings and hardwares complete. Each side panel is provided with a cutout for laying cables for the monitor and other computer. Each table has a toughened glass white board marker fixed on SS clips as shown including carriage of materials within all leads and lifts.) |
| 10 | Providing & supplying 3 seaters sofa of size 2150x750x875mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached.The legs should be made of knot free teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved). The sofa should have coil springs in seats and sinuous spring for backrest, padded with polyurethane foam fully upholstered fabric of De-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/-and above per meter or approved by HPTDC.The thickness of foam should be 4\" thick having density of 40±2Kg/m3 with 1/5\" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort to the sofa. The necessary thickness of foam should be used for cushioning of front/side approns of sofa. All open area or base or invisible part of the sofa should be fully covered with fabric including carriage of material within all leads and lifts. |
| 11 | Providing & supplying single sitter sofa of size 850x750x875mm (LxWxH) made up of hard wood frame double dowelled for proper strength, glued and screwed/nailed properly as per design/snaps attached.The legs should be made of knot free teak wood as per design or as approved finished with PU polish (Asian or equivalent or as approved). The sofa should have coil springs in seats and sinuous spring for backrest, padded with polyurethane foam fully upholstered fabric of de-decor, dicitex retails or equivalent or as approved make with cost of fabric Rs. 750/- per meter or approved by HPTDC.The thickness of foam should be 4\" thick having density of 40±2Kg/m3 with 1/5\" soft foam on base foam (sleepwell, Century or equivalent conforming to BS 5952 Part 1 1979 Ignition Source O (Cigarette)) to provided extra softness & comfort to the sofa. The necessary thickness of foam should be used for cushioning of front/side approns of sofa. All open area or base or invisible part of the sofa should be fully covered ( as per the scheme specified )with base fabric including carriage of material within all leads and lifts. |
| 12 | Supplying and installation of Reception Counterhaving length 1500mm, width 500mmheight 1110mm in front elevation, the middle work station having height 750mm made with 19 mm thick waterproof board, 4 mm teak ply, Beading/Lipping of different sizes, approved make of Mica in inner side of all cupboard and drawers of make centaury or equivalent and fixed with granite top. Including accessories like drawer, Cupboard, Key Board/Holder, S.S Handle and Channels etc complete in all respect or as per directions HPTDC authorities.. |
| 13 | Supplying and installation ofRestaurant Counter Length 900mm, height 900 mm in front elevation , middle work station height 750mm, width 400mm fitted with 19 mm thick waterproof board, 4 mm teak ply, Beading/Lipping of different sizes, approved make of Mica in inner side of all cupboard and drawers of make centaury or equivalent and fixed with granite top. Including accessories like drawer, Cupboard, Key Board/Holder, S.S Handle and Channels etc complete in all respect or as per directions HPTDC authorities.. |
| 14 | Providing & supplying of Reclining Couche single sitter size total length 67 cm, width 150 cm & height 89 cm and back length 58 cm provided with foam should be 4\" thick having density of 40±2Kg/m3 with 1/5\" soft foam on base foam (sleepwell or equivalent) with back rest cushion made with solid teak wood color brown furnish, rocking chair loading weight capacity approximately 200 kg, ergonomic designed curve suites human being structure perfectly, providingmaximum comfort ideal for bed rooms, well padded seats of ergonomic shape with back rest and arm rest providing exceptional comfort, relaxing place to sit |
| 15 | Providing & supplying of dressing stool size 30cm x 30cm x 30 cm provided with 4” foam cushion, frame material wooden shape square made with sturdy teak wood and fabric as per HPTDC design and color |
| 16 | Providing and supplying Bed side table 1\"-8\" x 1\"-4\" x 18\" (L X B x h) 2 nos. each side made of 18mm ply/boardfinished with 3.5mm veneer (Greenply/Archid or equivalent) on exposed surfaces and walnut mallamine polish (Asian or equivalent). The bed side unit having Two drawer made of ply/board fitted on telescopic runners (Hettich/Ozone or equivalent with Italian marvel top) and 100mm SS long handles. The inside of the drawers is finished in 0.8 mm laminate of Greenlam/Merino or equivalent including carriage of material within all leads and lifts. |
