|
| 1 | Dismantling PSC/RCC of grade M-20 & above by manual means including disposal of unserviceable materials & stacking serviceable materials upto 1000m lead with cost of all labour, machinery etc complete as per Clause-202 of MoRT&H specifications for Road & Bridge works ( 5th Revision)including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 2 | Excavation for road work in soil with hydraulic excavator of 0.9cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment locations with all lifts & leads up to 1000m.as per approved Drawing & Technical Specifications and as per Clause - 301 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc completeas per the direction of the Engineer -in –charge. |
| 3 | Sand filling in Road work & foundation of structure as per approved Drawing & Technical Specifications and as per Section - 2100 ofMoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, T&P etc completeas per the direction of the Engineer -in –charge. |
| 4 | PCC/RCC ( 1:1.5:3) using 12mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting including including cost, conveyance, royalty of all materials & cost of all labour, machinery etc complete as per approved Drawing & techinical specifications and Section 1500.1700 & 2200 ofMoRT&H specifications for Road & Bridge works ( 5th Revision)including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 5 | Providing & fixing in position RCC Crash barrier monolithic with slab M-40 grade as per approved drawingand technical specifications as per clause 1500, 1600,2300 & Clause-2703of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 6 | Supplying, Fitting, Fixing and Placing in position Strip Seal Expansion joints ncluding for ceiling cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. completeas per approved Drawing & techinical specifications andClause-2606 ofMoRT&H specifications for Road & Bridge works ( 5th Revision)as per the direction of the Engineer -in –charge. |
| 7 | Painting Two coatswith syntatic Enamel paints over a coat primer on anyelevation on road kerb, parapet & guard post including cost of paints & cost of all labour etc complete as per Techinical Specifications and Clause-803 of MoRT&H Specifications forfor Road & Bridge works ( 5th Revision)including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 8 | Providing and Applying Primer Coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning the road surface and spreading primer @ 0.60kg per sqm using mechanical means as per Technical Specifications and as per Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works ( 5th Revision) including cost, conveyance & other taxes of materials, cost of labour, machinery, T&P etc complete as per the direction of the Engineer -in –charge. |
| 9 | Providing & laying Dence graded Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 505 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete as per the direction of the Engineer -in –charge. |
| 10 | Providing & layingBituminous Concrete of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 507 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete as per the direction of the Engineer -in –charge. |
| 11 | Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in Table 500-29, prepared by using mastic cooker and laid to required level and slope after cooking the surface, including providing anti-skid surface with bitumen precoated fine granite hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and an approximate spacing of 10 cm center to center in both direction, pressed into surface when the temperature of surfaces is not less than 100 C protruding 1 mm to 4 mm over mastic surface including cost, conveyance, royality of all materials & cost of all labour, machinary etc complete as per Clause 516 of MoRT&H Specifications for Road & Bridge works ( 5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc completeas per the direction of the Engineer -in –charge. |
| 12 | Providing, Fitting & Fixing of Drainage Spouts in Deck slab as per approved Drawing & Technical Specifications and as per Section 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer -in –charge. |
| 13 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and Section-800,1600 & 1700 as per Clause - 803.4 of MoRT&H Specifications for Road & Bridge works ( 5th Revision) including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 14 | Providing & erecting a \"W\" metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ ground level fixed ISMC series channel vertical post 150mm x 75mm x 5mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel part & filments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause-811 of MoSRT&H Specifications for Road & Bridge works ( 5th Revision)including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
