Military Engineer Services-MES has published Tender For Special Repair To 01 X Sedimentation Water Tank At High Lift Pump House And Provn Of Aluminium Door And Aluminium Partition In 183 Mh At Leimakhong Mil Stn. Submission Date for this Tender is 07-02-2023. Pump House Construction Tenders in leimakhong Manipur. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 31-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-02-2023 |
Sl. No. | Item Description |
1 | Schedule "A" |
2 | Demolition of RCC of any description and in any position not otherwise specifically provided for cement concrete(reinforcement cut as required to facilitate) complete all as specified and directed. |
3 | M&L for RCC M-30 (Design Mix) using 20 mm graded crushed stone aggregate as in beams, lintels and the like over 1.5m span complete all as specified and directed. Note:- Reinforcement and form work required shall be measured and paid seperately. |
4 | M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding supports, overhangs, etc. also splays between floors and beams, etc fair finised surface of concrete complete all as specified and directed |
5 | M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
6 | M & L TMT mild steel bars 6mm to 8 mm dia and over ,cut to length,bend to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed. |
7 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. |
8 | M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:4) using water proofing compound @3% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately) |
9 | M&L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over newly plastered surface of wallcomplete all as specified and directed. |
10 | M&L for rendering 15mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @3% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately) |
11 | Supply of Integral water proofing Compound ISI marked complete all as specified and directed. |
12 | Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thicknessroof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed. |
13 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
15 | S & F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and as directed. |
16 | S&F structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. |
17 | Dismantling framed steeltrusses span nexc 10m complete all as specified and as directed by the Engineer-in-Charge |
18 | Erection & Re-fixing only steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed |
19 | M&L forprepraration of new or untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
20 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
21 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed. |
22 | M&L for 75mm thick PCC 1:3:6 Type C2using 40mm graded crushed stone aggregate as in plinth protection hardstanding finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
23 | The procedure for external repair and crack filling treatment is as under :- (a)Clean the surface properly mechanically so that no loose foreign materials exit on the surface, (b)Cut the crack in V groove, & drill upto 70 % of the concrete depth at every 0 .5 mt with adrill bitof min 12mm, (c)Fix PVC nozzlesinto the holes with the help of Renderoc Plug, (d)By using Hand pump pressure grout Cement admixed with Cebex 100 @ 225gm per 50 kg of cement in to the nozzleswith a pressure of 3kg/cm, (e)Continue pressure till the hand pump become unbearable or the grout materials come out of some other holes. (f) After completion of all the grout points, Cure the grout & cut the external portion of the Nozzles. (g) After full cure of the grout cut the external portions of the pvc nozzles. Apply Nitobond SBR Latex with Water & cement in ratio of 1:2:4 by brush application over the area At the green stage of this coating Seal the nozzle holes with help of Polymer modified cement mortar. To make the polymer modified Cement mortar mix Hydroproof Xtra with Cement & sand in ratio of 1: 2: 3. (h)Fill up the cracked area with the same polymer modified mortar with use of Hydroproof Xtra & cement Sand in the above said ratio. (j)Cure the surface with sufficient water for at least 48 hrs. Necessary scaffolding, props, cement and sand.Note:This work executed as per manufacturer instruction |
24 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed |
25 | S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gasket suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed. |
26 | Ditto all as per Item No-24 above but exceeding 0.5 Sqm in each pane. |
27 | M&Lfor 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed withaluminum beading and gaskit to aluminum frame work complete all as specified and directed. |
28 | S&FAnodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron)of any colourdoor shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beadingscrews etc. including all fittings complete all as specified and directed. |
29 | M&L for Anodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron)slidingwindowand ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc including all fittings complete all as specified and directed. |
30 | Supply and fixedaluminium (extruded section body) door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
31 | S&F brass mortice lock, vertical type, size 100 mm, 4 levers complete all as specifed and directed. |
32 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail