Construction Of Csc Toilet Under Sbm(G) And 15Th Fc Programme At Bllro Office At Habibpur Gp Under Habibpur Development Block Malda
Tender Value
2.99 Lakhs
Estimated cost
Bid Submission
24 Jan 2023
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
habibpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Csc Toilet Under Sbm ( G ) And 15Th Fc Programme At Bllro Office At Habibpur Gp Under Habibpur Development Block Malda
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) |
| 3 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating the same by thorough saturation with water ramming complete, including the cost of supply of sand. |
| 4 | Cement concrete with graded stone ballast (40 mm. size) excluding shuttering. |
| 5 | A) Ordinary Cement Concrete (mix 1 :1.5:3) with graded stone chips (20 mm. nominal size) excluding shuttering and reinforcement, if any,as per relevant IS codes. |
| 6 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. |
| 7 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (SAIL / TATA / RINL / JSPL) |
| 8 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) |
| 9 | A) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar..Complete A. i) With 1:6 cement mortar (c) 15 mm. thick plaster. |
| 10 | B.(i) With 1:6 cement mortar (b) 20 mm. thick plaster |
| 11 | C.ii) With 1:4 cement mortar (c) 10 mm. thick plaster. |
| 12 | Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc. in all floors about 1.5 mm thick |
| 13 | Supplying, Fitting, Fixing Factory made prelaminated P.V.C door frame of size 50 mm x 47 mm with a wall thickness of 5 mm, made put of extruded 5 mm prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x 15 mm M.S square tube. The two vertical door profiles are to be reinforced with 19 mm x 19 mm M.s square tube of 19 gauge, weather sela to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M/S Screws through the frame by using P.V.C fasteners. A minimum of 4 nos of screws to be provided for each vertical member specification and direction of E-I-C |
| 14 | Supplying,Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S tubes of 19 gauge thickness and size 19 mm x 19 mm for styles, top and bottom rails, M.S frame shall have cost of steel primers of approved make and manufacture, M.S frame covered with 5 mm th. heat moulded PVC \"C\" channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles, and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out ofwhich 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall beprovided either side of the panel with 10 mm (5 mm x 2 ) th, 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S frame welded/ sealed to the styles & rails with 7 mm (5 mm + 2 mm) th. x 15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm whick is to be stuck on the interior side of the \"C\" channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of E-I-C |
| 15 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. (In Ground Floor).b) Two Coatsi) Water based interior grade Acrylic Primer |
| 16 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC.In Ground Floor:(b) Two Coats |
| 17 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same throughly…….(iii) Two Coats. |
| 18 | Construction of Septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia R.C.C manhole cover (heavy type) of approved make supplied, fitted and fixed in the 100 mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20 mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4:1) to outside wall upto 200 mm below G.I floor finished with 25 mm thick gray artificial(A) With Pakur Variety(i) For 10 users |
| 19 | Construction of Circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intremidiate cement brick work (1:4) …. with all costs of labour and materials With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00 m inside dia(Other than SAIL/TATA/RINL)(A) With Pakur Variety |
| 20 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of theEngineer-in -charge.In ground floor. |
| 21 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. |
| 22 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing)(ii) 580mm x 440 mm |
| 23 | Supplying, fitting and fixing cast iron \"P\" or \"S\" trap conforing to I.S 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed (A) \"P\" trap(iii) 100 mm |
| 24 | Supplying, fitting and fixing Squating plate with integral flushing in white vireous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid separately). |
| 25 | Supplying, fitting and fixing alloy iron with brass spindle bib cock / stop cock of approved brand and make , spray painted and tested to 21 Kg per sq, cm.(i) 15 mm dia |
| 26 | Supplying , fitting and fixingFlat Back urinals of approved quality in position…………..etc complete.. |
| 27 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.. (a) C.P. urinal flush pipe fittings range of one |
| 28 | Supplying, fitting and fixing soap holder.(c) Polythene |
| 29 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 30 | Supplying, fitting and fixing 10 litre P.V.C low-down cistern conforming to I.S specification with P.V.C fittings complete, C.I brackets including two coatsof painting to bracket etc. |
| 31 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories,(ii) CPVC Pipes Class-2,SDR-13.5 (A)15 mm. dia. |
| 32 | (B) 20 mm dia. |
| 33 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.i) 450 mm X 300 mm size |
| 34 | Supplying P.V.C water storage tank of approved quality with closed top with lid (Black) - Multilayer. i) 500 Litre capacity |
| 35 | Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paintcomplete. (Payment of Painting will however be paid seperately).(iii) 50 mm dia |
| 36 | Add GST @ 18% |
| 37 | Add Cess @ 1% |
AI Tender Summary
Tender Timeline
Jan 16, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 30, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender