Karnataka Neeravari Nigam Limited has published Tender For Procurement Of Main Quality Control Ballari Lab Equpiments For The Year 2022-23. , Shrinkage Limit Apparatus With All Accessories As Per Is Standards Including: ( I ) Evaporating Dish 12Cm Dia And Flat Bottom Of Dia Not Less Than 55Mm Or An . Submission Date for this Tender is 24-01-2023. Kitchen Equipment Tenders in Karnataka. Bidders can get complete Tender details and download the document.
Sl. No. | Item Name |
1 | Shrinkage Limit apparatus with all accessories as per IS Standards including: (i) Evaporating dish 12cm Dia and flat bottom of Dia not less than 55mm or An enamel iron tray with pour out (ii) Spatula 8cm long & 2cm wide flexible (iii) Shrinkage dish Circular porcelain or non corroding metal dish inert to mercury having flat bottom and 45mm in Dia & 15mm height internally the internal corner between the bottom and the Vertical sides shall be rounded into a smooth concave curve. iv) Straight edge about 15cm in length. (v) Glass Cup 50 to 55mm in Dia and 25mm in height, the top Rim of which is good Smooth & level |
2 | Sand replacement of 200 mm dia Specification with all accessories as per IS Standards including: Sand Pouring Cylinder fitted with Conical funnel and Shutter, Cylindrical Calibration Container, and a Metal tray with a central hole |
3 | Sand replacement of 150 mm dia Specification with all accessories as per IS Standards including: Sand Pouring Cylinder fitted with Conical funnel and Shutter, Cylindrical Calibration Container, and a Metal tray with a central hole. |
4 | 300mm dia G I Sieves As per IS Standards 75mm, 63mm, 53mm,50mm,37.5mm 26.5mm,22.4mm, 19mm,16.0mm, 13.2mm, 12.5mm, 11.2mm, 9.5mm, 6.5mm,6.3mm, 5.6mm,4.75mm,2.36mm ,Lid & Pan. |
5 | 200mm dia Brass Sieves As per IS Standards 4.75mm,3.35mm,2.8mm,2.36mm ,2.0mm,1.18mm 1.00mm, 90mic ,850 mic, ,600mic,425mic ,300 mic,180mic,150mic, 75mic, 2.00 mic,1.00 mic Lid & pan. |
6 | Core cutter (100mm Dia & 130mm length, 6mm thickness ) with Dolly (100mm Internal Dia& 115mm External Dia, 25mm Length ) |
7 | Aluminium containers for Mositure content determinitation (50mm Dia) |
8 | Rodometer Digital |
9 | Digital weighing Balance 5 kg with 0.1gm accuracy |
10 | Digital weighing Balance 35 kg with 2 gm accuracy |
11 | Digital weighing Balance 500 gm with 0.01gm accuracy |
12 | Graph type Rebound Hammer for (Non Destructive Concrete Test) with all accessories as per IS Standards |
13 | IS standard Concrete cube moulds of size 15cmx15cmx15cm |
14 | Swelling pressure apparatus with all accessories as per IS Standards including : 1)Consolidometer 2) Ring 3) Porous Stones 4) Dail Gauge 5) Soil Trimming Tools |
15 | VIBRATING TABLE 20” x 20” x 20”,Specification: The maximum load capacity is 140 kg. |
16 | COMPACTION FACTOR APPARATUS with all accessories as per IS Standards 1) Hoppers & Receiver 2) Frame 3) Accessories |
17 | Glass Graduated Cylinders (100ml Capacity) |
18 | Triaxial shear test apparatus with all accessories as per IS Standards including: 1)Membrane stretcher 2) Rubber rings 3) Triaxial test cell |
19 | MOTORIZED LABORATORY CONCRETE MIXER Specification: It consists of a steel vessel of 55/ 110 Litres capacity, mounted on a frame. The vessel is rotated at 20-22 RPM with the help of a motor and a pulley arrangement. The vessel of laboratory concrete mixer can be titled to any angle by a hand wheel and counter weight. the large pulley wheel facilitates manual rotation of the drum during power failure. The drum, pulley wheel, and motor are mounted on a steel frame in this laboratory concrete mixer. The concrete mixer is fitted with 0.5HP motor. Suitable for Operation on 220V, Single Phase, 50Hz, AC Supply |
20 | Laboratory Permeability test apparatus with all accessories as per IS Standards including: Permeability cell assembly mould, Drainage base , Drainage cap, Metal ring Set of stand pipes: Glass stand pipes for falling head (variable head) test arrangement, varying in diameter from 5 to 20mm |
21 | Specific gravity bottle 50CC with lid |
22 | Specific gravity bottle 100CC with lid |
23 | Glass Funnel of 50cc, 100cc |
24 | Le chateliers Flask for Specific gravity of Cement with all accessories as per IS Standards |
25 | 1000ml & 500 ml measuring Jar |
26 | Pycnometer as per IS Standards of about 1 litr capacity having a metal conical screw top with 6mm diameter hole at its apex |
27 | Digital Stop Watch |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail