Providing Of Security Chain Link Fencing With Overhead Concertina Coils And Iron Pillars Neas Peerawali Gate / Peerbaba Area At Ebs, At Hisar Mil Stn Under Ge ( W ) Hisar
Tender Value
38.96 Lakhs
Estimated cost
Bid Submission
01 Feb 2023
0 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hisar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Of Security Chain Link Fencing With Overhead Concertina Coils And Iron Pillars Neas Peerawali Gate / Peerbaba Area At Ebs, At Hisar Mil Stn Under Ge ( W ) Hisar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-Feb-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation including site clearance(including removal of bushes, trees less than 30 cm girth) not exceeding 30cm deep and averaging 15cm deep and getting out removing the debris from the site upto 50 mtr complete all as specified and directed. |
| 2 | Excavation in post holes each n. exc .50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 mtr and making good disturb surfaces complete all as specified and directed. |
| 3 | M&L for plain cement concrete type C-2 1:3:6 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M & L 10 mm dia MS round bar for fixing of chain link fencing with post complete all as specified and directed. |
| 5 | S & F MS work in posts and struts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc, flat iron fillets for securing wire mesh including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 6 | S & F 10mm dia 40mm long MS screw bolt machine made with hexagonal or Square head at one end and screwedthe other,screwed end fixed with washer complete all as specified and directed. |
| 7 | Supply only GI Chain linkfencing, any dia,any size or type complete all as specified and directed. |
| 8 | Fixing only GI chain link fencing of any dia, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire complete all as specified and directed. |
| 9 | M & L two coats of synthetic enamel paint over red oxide primer on new steel surfaces of any description over 10 cm in width or girth not otherwise described including preparation of surfaces complete all as specified and directed. |
| 10 | M & L one coat of red oxide primer on new steel surfaces of any description not exc 10 Cm in width or girth including preparation of surfaces complete all as specified and directed. |
| 11 | Excavation in trenches n.exc. 1.50 m wide and n.exc. 1.50m in depth for foundation and getting out complete all as specified and directed. |
| 12 | Returning filling in incldg spreading,levelling, watering and well ramming in layers not exc. 25 cmcomplete all as specified and directed. |
| 13 | Removing excavated material soils n.exc. 50m and deposited where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed. |
| 14 | M&L for formwork to sides of Concrete foundations ,fottings ,bases of columns ,raft and raft beams ,sides and soffits (if any )of foundation and plinth beams ;and similar work ;vertical or to batter complete all as specified and directed. |
| 15 | M&L for formwork to sides of pillars,posts ,struts,piers,columns and stanchions complete all as specified and directed. |
| 16 | M&L reinforced cement concrete 1:2:4 type B1(20 m graded aggregates) in Foundationas, includings rafts ,footings,foundation beams;plinth beams,bases for columns etc ;basement slabs ,under-reamed piles and mass concrete complete all as specified and directed. |
| 17 | M&L reinforced cement concrete 1:2:4 type B1 (20m graded aggregates)in columns ,pillars ,piers,postsand struts complete all as specified and directed. |
| 18 | M& L for preparation of newly plastered surfaces of wall and applying two coat of cement base paintover one coat of white wash complete all as specified and directed |
| 19 | M&L Mild steelbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 20 | M&L mild steel bar 5 mm dia over and upto and including 10mm dia in stirrups spacers and binders complete all as specified and directed. |
| 21 | M&L Rendering 10mm thick in cement mortar 1:4 on faces of brick work or concrete work, finished even & fair without using extra cement complete all as specified and directed. |
| 22 | S&FMild steel confirming to Fe 290 Grade E-165 in framned work such as grills ,gratings etc with ends of bars Shouldered and/or riveted or forged into spikes ;framed guard bars;barred iron doors,ladders;rallings and similar as in side hung gate s work complete all as specified and directed. |
| 23 | M&L for providing and fixing concertina coil fencing with punch tape concertina coil 600 mm dia having 10 round/ RM upto 4 mtr height of wall with angle iron \"Y\" shape complete all as specified and directed. |
| 24 | M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed fixed in repair (each line wire to be measured) complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Jan 25, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Feb 01, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedFeb 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender