Repair And Painting Of Steel Furniture At Itarana Alwar Repair And Painting Of Steel Furniture At Itarana Alwar-- 1 Table 900x900x760mm without drawer FD 1009 similar patternand removing the exiting unserviceable part with the following new part :-Top of size 900mm x 900mm made out of 18mm thick Prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround as per existing size and shape as per drg. 2 Table 900x900x760mm without drawer FD 1009 similar patternand removing the exiting unserviceable part with the following new part :-Leg made out of 25mm square mild steel tube with wall thickness 1.6mm, 740mm long duly painted with two coats of synthetic enamel paint over a coat of red oxide primer as per existing size and shape as per drg. 3 Table 900x900x760mm without drawer FD 1009 similar patternand removing the exiting unserviceable part with the following new part :-PVC Ring /Rubber shoe as per drg. 4 Table 900x900x760mm without drawer FD 1009 similar patternand removing the exiting unserviceable part with the following new part :-Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal black as per drgs 5 Table 900x600x760mm with drawer/without drawer FD-1008/FD-1007 similar patternand removing the exiting unserviceable part with the following new part :-Top size 900mm x 600mmsize made out of 18mm thick prelaminated MDF board one side decorative of approved shape incl 4mm thick teak wood edging as per existing size and shape as per drg. 6 Table 900x600x760mm with drawer/without drawer FD-1008/FD-1007 similar patternand removing the exiting unserviceable part with the following new part :-Leg made out of 25mm square mild steel tube with wall thickness 1.6mm, 740mm long duly painted with two coats of synthetic enamel paint over a coat of red oxide primer as per existing size and shape as per drg. 7 Table 900x600x760mm with drawer/without drawer FD-1008/FD-1007 similar patternand removing the exiting unserviceable part with the following new part :-Lock for drawer/shutter with duplicate keys (Make-GODREJ/HARRISON) 8 Table 900x600x760mm with drawer/without drawer FD-1008/FD-1007 similar patternand removing the exiting unserviceable part with the following new part :-Drawers as per existing size and shape duly paintsynthetic enamal as per drgs. 9 Table 900x600x760mm with drawer/without drawer FD-1008/FD-1007 similar patternand removing the exiting unserviceable part with the following new part :-Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal OG Paint as per drgs 10 Table Dining ORs FD -165 (M) similar pattern and removing the existing unserviceable part with the following new parts :-Top of size 1900mm x 685mm made out of 18mm thick Prelaminated MDF board one side decorative of approved shade including 4mm thick teakwood edging alround complete all as shown on drawing and directed. 11 Table Dining ORs FD -165 (M) similar pattern and removing the existing unserviceable part with the following new parts :-PVC Ring /Rubber shoe as per drg. 12 Table Dining ORs FD -165 (M) similar pattern and removing the existing unserviceable part with the following new parts :-Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal OG Paint as per drgs 13 Chair Computer/Chair Revolving FD-FD/E6/MAP01 similar pattern and removing the existing unserviceable part with the following new parts. 12mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50mm thick density 50-55 Kg/Cum hardness 20 + 2 kg on Hampden machine) with PVC lipping alround for seat and back (Seat size shall be 510x470x60mm and back size as shown on drawing) all as directed and shown on drawing. 14 Chair Computer/Chair Revolving FD-FD/E6/MAP01 similar pattern and removing the existing unserviceable part with the following new parts. Lumber support for extra comfort anti shock back mechanism to prevent back rest from tilting the user. 15 Chair Computer/Chair Revolving FD-FD/E6/MAP01 similar pattern and removing the existing unserviceable part with the following new parts. Arm rest made of black integral skin polyurethane with 75-85 shore A hardness and reinforced with MS insert scratch and weather resistant. 16 Chair Computer/Chair Revolving FD-FD/E6/MAP01 similar pattern and removing the existing unserviceable part with the following new parts. Castor wheel as per existing size and shape specified. 17 Chair Computer/Chair Revolving FD-FD/E6/MAP01 similar pattern and removing the existing unserviceable part with the following new parts. Pedestal assembly injection moulded in black 30% glass filled nylon 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castor. 18 Table bed side FD/E6/MAP/15 R similar pattern and and removing the existing unserviceable part with the following new partsDrawer - 18mm thick particle board with 3mm thick teakwood edging duly support be telescopic channel 1.6mm as per existing size and shape as per drg. 19 Table bed side FD/E6/MAP/15 R similar pattern and and removing the existing unserviceable part with the following new partsDrawer box - 18mm thick prelaminated particle MDF board with teakwood edging for front rest part will be 12 mm commercial ply duly fitted with telescopic channel 1.6mm as per existing size and shape as per drg. 20 Table bed side FD/E6/MAP/15 R similar pattern and and removing the existing unserviceable part with the following new partsHandle as per existing size and shape as per drg. 21 Table bed side FD/E6/MAP/15 R similar pattern and and removing the existing unserviceable part with the following new partsTop 18mm thick prelaminated particle MDF board as per existing size and shape as per drg. 22 Table bed side FD/E6/MAP/15 R similar pattern and and removing the existing unserviceable part with the following new partsPreparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal black as per drgs 23 Chair writing FD/E6/MAP/12 similar pattern and removing the existing unserviceable part with the following new part as per drg.12mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50mm thick density 50-55 Kg/Cum hardness 20 + 2 kg on Hampden machine) with PVC lipping all round for seat and back. Make -Sleepwell. 24 Chair writing FD/E6/MAP/12 similar pattern and removing the existing unserviceable part with the following new part as per drg.Lumber support for extra comfort anti shock back mechanism to prevent back rest from tilting the user. 25 Chair writing FD/E6/MAP/12 similar pattern and removing the existing unserviceable part with the following new part as per drg.Arm rest made of black integral skin polyurethane with 75-85 shore A hardness and reinforced with MS insert scratch and weather resistant having slope towards front. 26 Chair writing FD/E6/MAP/12 similar pattern and removing the existing unserviceable part with the following new part as per drg.Nut and bolt duly support for seat and back. 27 Chair writing FD/E6/MAP/12 similar pattern and removing the existing unserviceable part with the following new part as per drg.Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with one coat of synthetic enamal black paint as per drgs 28 Table Computer FD/E6/MAP/03 similar pattern and removing the existing unserviceable part with the following new part as per drg.Top 18mm thick prelaminated particle MDF board as per existing size and shape duly funished and polished. 29 Table Computer FD/E6/MAP/03 similar pattern and removing the existing unserviceable part with the following new part as per drg.Key board tray 18mm thick prelaminated particle MDF board as per existing size and shape duly funished and polished. 30 Table Computer FD/E6/MAP/03 similar pattern and removing the existing unserviceable part with the following new part as per drg.Drawer 18mm thick prelaminated particle MDF board as per existing size and shape duly funished and polished. 31 Table Computer FD/E6/MAP/03 similar pattern and removing the existing unserviceable part with the following new part as per drg.Sliding/ telescopic channel of table computer with new sliding channel of approved quality (replace in pair), complete all as specified, shown on drawing and directed. 32 Table Computer FD/E6/MAP/03 similar pattern and removing the existing unserviceable part with the following new part as per drg.Handle as per existing size and shape as per drg. 33 Table Computer FD/E6/MAP/03 similar pattern and removing the existing unserviceable part with the following new part as per drg.PVC Ring /Rubber shoe as per drg. 34 Table Computer FD/E6/MAP/03 similar pattern and removing the existing unserviceable part with the following new part as per drg.Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal black paint as per drgs. 35 Chair Verandah FD/MAP-II/15 (R) similar pattern and removing the existing unserviceable parts with the following new parts as per drg.12mm thick seat and back made of PVC moulded along with 4x10mm ribs provided at around the outer edge & around the grooves of size as per drg. 36 Chair Verandah FD/MAP-II/15 (R) similar pattern and removing the existing unserviceable parts with the following new parts as per drg.Hard PVC shoes as per drg. 37 Chair Verandah FD/MAP-II/15 (R) similar pattern and removing the existing unserviceable parts with the following new parts as per drg.Preparation/cleaning of existing decorated surface / rubbing by emery paper , removing all spots, filling with putty , spray painting with two coat of synthetic enamal white paint as per drgs 38 Almirah large steel FD -67 /FD -1031 similar pattern and removing the existing unserviceable part with following new part as per drg.MS locks 6 lever brass 50mmx50mm with duplicate keys as per drg. Make : Godrej/Harrison/Link 39 Almirah large steel FD -67 /FD -1031 similar pattern and removing the existing unserviceable part with following new part as per drg.Handle Chromium plated handle (superior quality) of existing size, shape, complete all as specified, shown on drg and directed. 40 Almirah large steel FD -67 /FD -1031 similar pattern and removing the existing unserviceable part with following new part as per drg.Removing the existing complete cleats of Almirah Large Steel and supply & fixing new locking device complete of apropriate size & shape as per existing pattern all as specified as per drg. 41 Almirah large steel FD -67 /FD -1031 similar pattern and removing the existing unserviceable part with following new part as per drg.Taking out old unserviceable locking verticle rod of Almirah large steel and supply & fixing new leg made out of 1.00 mm thick MS sheet by welding all as shown on drawing and as specefied. 42 Almirah large steel FD -67 /FD -1031 similar pattern and removing the existing unserviceable part with following new part as per drg.Taking out old unserviceable shutter of Almirah large steel and supply & fixing new leg made out of 1.00 mm thick MS sheet by welding all as shown on drawing and as specefied. 43 Almirah large steel FD -67 /FD -1031 similar pattern and removing the existing unserviceable part with following new part as per drg.Taking out old unserviceable leg of Almirah large steel and supply & fixing new leg made out of 1.00 mm thick MS sheet by welding all as shown on drawing and as specefied. 44 Almirah large steel FD -67 /FD -1031 similar pattern and removing the existing unserviceable part with following new part as per drg.Taking out old underviceable shelves of Almirah Large Steel and supply & fixing new shelf made out of 1.00 mm thick MS sheet, size 480x915mm including new angle iron cleat, nuts, bolts etc. complete all as shown on drawing and as specefied. 45 Almirah large steel FD -67 /FD -1031 similar pattern and removing the existing unserviceable part with following new part as per drg.M & L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG paint as per drg. 46 Almirah Medium Steel FD -67 /FD -1032 similar pattern and removing the existing unserviceable part with following new part as per drg :-Removing the existing complete locking device of Almirah Medium Steel and supply & fixing new locking device complete of apropriate size & shape as per existing pattern all as specified as per drg. 47 Almirah Medium Steel FD -67 /FD -1032 similar pattern and removing the existing unserviceable part with following new part as per drg :-Removing the existing complete locks of Almirah Medium Steel and supply & fixing new lock of apropriate size of Godrej pattern as per existing design 3 lever with two keys after proper setting of shutter all as specified as per drg. 48 Almirah Medium Steel FD -67 /FD -1032 similar pattern and removing the existing unserviceable part with following new part as per drg :-Hinges 75mm as per drg. 49 Almirah Medium Steel FD -67 /FD -1032 similar pattern and removing the existing unserviceable part with following new part as per drg :-Handle Chromium plated handle (superior quality) of existing size, shape, complete all as specified, shown on drg and directed. 50 Almirah Medium Steel FD -67 /FD -1032 similar pattern and removing the existing unserviceable part with following new part as per drg :-Taking out old unserviceable leg of Almirah medium steel and supply & fixing new leg made out of 1.00 mm thick MS sheet by welding all as shown on drawing and as specefied. 51 Almirah Medium Steel FD -67 /FD -1032 similar pattern and removing the existing unserviceable part with following new part as per drg :-Taking out old underviceable shelves of Almirah Medium Steel and supply & fixing new shelf made out of 1.00 mm thick MS sheet, size 480x915mm including new angle iron cleat, nuts, bolts etc. complete all as shown on drawing and as specefied. 52 Almirah Medium Steel FD -67 /FD -1032 similar pattern and removing the existing unserviceable part with following new part as per drg :-M&L for preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, paint internally and externally with two coats of synthetic enamel OG paint as per drg. 53 Chair Verandah FD-256 similar pattern and removing the existing unserviceable parts with the following new parts as per drg.M&L for removing of existing old used and unserviceable cane from Chair Verandah and re-tapping (reweaving) both side with new white colour plastic cane 4mm best quality white colour and shall be woven as per godrej pattern(seat & back both), stitched with approved plastic cane at starting and terminating ends as per trade practice all as shown on drawings. 54 Chair Verandah FD-256 similar pattern and removing the existing unserviceable parts with the following new parts as per drg.M&L for removing unserviceable rubber shoe of chair Verandah and providing new hard rubber shoe in black colour as per sample kept in Furniture Yard Alwar. 55 Chair Verandah FD-256 similar pattern and removing the existing unserviceable parts with the following new parts as per drg.M&L for preparation/cleaning old painted steel surface of chair Verandah and painting with a coat of white synthetic enameled paint over a coat of red oxide primer after preparation of surfaces all as specified as per drg. 56 Chair School steel with hand board FD/E6/MAP/05 similar pattern and removing the existing unserviceable parts with the following new parts as per drg :-Top openable of size as per drg made out of 18mm thick prelaminated MDF board both side decorative of approval shade (Exterior grade) with PVC edging alround, hinged on Right Hand Side (RHS) screwed to & including 25mm dia mild steel tube with wall thicness 1.6mm inserted in 20mm dia mild steel rod welded to frame, steel surfaces powder coated. Drg No FD/E6/MAP/05. Make -Century. 57 Chair School steel with hand board FD/E6/MAP/05 similar pattern and removing the existing unserviceable parts with the following new parts as per drg :-PVC Ring /Rubber shoe as per drg. 58 Chair School steel with hand board FD/E6/MAP/05 similar pattern and removing the existing unserviceable parts with the following new parts as per drg :-PVC seat and back in one piece of size as per drg with 60mm lean distance fixed with screws. 59 Chair CB steel FD -75(M) with arms and without arms similar pattern and removing the existing unserviceable parts with following new parts.Taking out old unserviceable seat & back andsupply and fixing new wooden seat 1st class hard wood (shisham) made to shape for Chair CB Steel with/with out arms duly caned with 2 to 2.5mm wide half round as per godrej pattern with and including fixing with machine screw i.e bolt 75mm size with nuts and washers through holes in the wooden frame including painting with two coats of synthetic enamel paint (Black colour) over one coat of pink primer on wooden surface complete all as specified. 60 Chair CB steel FD -75(M) with arms and without arms similar pattern and removing the existing unserviceable parts with following new parts.Removing old unserviceable flat iron and supply and fixing new flat iron 25mmx 3mm, 450mm long fixed under the wooden seat of the Chair CB steel with arms or without arms by welding (so that the wooden seat can rest on it) with and including painting the flat iron with two coats of synthetic enamel paint of approved colour over a coat of primer to match with existing colour complete all as specified and as directed. Note: Two Nos flat iron strip shall be provided to seat of each chair and cost of two strip shall be considered in one job. 61 Chair CB steel FD -75(M) with arms and without arms similar pattern and removing the existing unserviceable parts with following new parts.Left/right arms rest with nut and bolts of Chair CB with arms as per drg. 62 Chair CB steel FD -75(M) with arms and without arms similar pattern and removing the existing unserviceable parts with following new parts.PVC Ring /Rubber shoe as per drg. 63 Chair CB steel FD -75(M) with arms and without arms similar pattern and removing the existing unserviceable parts with following new parts.Preparation/cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling with putty, providing two coat of french polish match with existing colour. 64 M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-Rack Steel various type 65 M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-book Shelf open and close type (small/large) steel 66 M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-Table with drawer (steel) (900 x 600 x 760mm) FD-84(M) 67 M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-Chair CB with arms (steel) FD 81 (M) 68 M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-Chair CB without arms (steel) FD-75(M) 69 M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-Form without back FD-257 70 M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-Form with back FD-77(M) 71 M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-Chair school with hand board FD/E6/MAP/11 72 M&L for preparation of old painted steel and iron surfaces of the under mentioned furniture articles including necessary denting and spray painting two coats with olive green /gray/ white / black first quality synthetic enamel paint on all shown on drawings :-Stool Steel 305x305x510/760mm (FD-81M)
