|
| 1 | Excavation in trenches not exc 1.50 metre wide and not exc 1.50 metre deep in soft/ loose soil for laying of pipe line and getting out complete all as specified and directed by Engineer-in-Charge. |
| 2 | Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm all as specified and as directed by Engineer-in-Charge. |
| 3 | Removal of excavated soil surplus to the requirement to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point. |
| 4 | Taking up/down existing pipes with connection from trenches incl connected fittings/accessories complete of 200 mm bore size. |
| 5 | All as per Ser Item No 4 here in before but of size 150 mm bore. |
| 6 | All as per Ser Item No 4 here in before but of size 100 mm bore. |
| 7 | Supply and laying Ductile iron pipe of 200 mm bore, S/S,Class K-9, including rubber gasket(tyton) joints, nut, bolts & washers ISI markedcomplete all as specified and directed by Engineer-in-Charge. |
| 8 | All as per Ser Item No 7 here in before but of size 150 mm bore |
| 9 | All as per Ser Item No 7 here in before but of size 100 mm bore |
| 10 | Supply and laying Ductile iron pipe of size 200mm bore, flanged end, K-9, ISI marked including rubber gasket for flange joint, nut, bolts and washer etc complete all as specified and directed by Engineer-in-Charge. |
| 11 | All as per Sl item No.10 here in before but size 150 mm bore. |
| 12 | All as per Sl item No.10 here in before but size 100 mm bore. |
| 13 | M&L for ductile iron fittings for spigot and socket /fanged pipe such as bends (any type radius and angle) tapers any type (straight, bends, increasing, decreasingor double socket etc) Tee pieces single branch, \"Y\" junction, double branch, cross collers, caps and plugs upto 150 mm bore complete all as directed by Engineer-in-Charge |
| 14 | All as per item No 13 here in before but for 200 mm bore. |
| 15 | Taking out and S&F in replacement cast iron sluice valve PN-1.6 with flanged ends 200 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber /fiber boared gasket nuts, washers etc complete. |
| 16 | All as per item No 15 here in before but 150 mm bore. |
| 17 | All as per item No 15 here in before but 100 mm bore. |
| 18 | All as per item No 15 here in before but 80 mm bore. |
| 19 | M&L for PCC Block masonry valve pit of size 120 x 120 x 120 cm (internal dimensions of chamber) built in CM 1:6 including 10mm thick plastering internally with cement mortar 1:6 and flush pointing externally as the work proceeds in same mortar complete with 3.15mm thick MS sheet cover with angle iron 40 x 40 x 6mm frame, handle, locking arrangement including provisioning of 2 foot steps made out of MS 16mm round bars and painting steel surface (cover inside and outside with frame) with two coats of synthetic enamel paint over a coat of red oxide primer complete. |
| 20 | M & L for PCC 1:3:6type C1 (using 20 mm graded crushed stone aggregate) for filling of road/path cutting etc complete all as specified and directed by Engr-in-Charge. |
| 21 | Taking up/down steel tubing 80mm dia GI pipelines/connection from trenches incl connected fittings/accessories. |
| 22 | All as per srl item No. 21 here in before but of 50 mm bore. |
| 23 | All as per srl item No. 21 here in before but of 40 mm bore. |
| 24 | All as per srl item No. 21 here in before but of 25 mm bore. |
| 25 | All as per srl item No. 21 here in before but of 20 mm bore. |
| 26 | Supply and laying in trenches GI pipe 80 mm bore medium grade ISI markedwith all fittings complete all as specified and directed by Engineer-in-Charge. |
| 27 | All as per srl item No. 26 here in before but of 50 mm bore. |
| 28 | All as per srl item No. 26 here in before but of 40 mm bore. |
| 29 | All as per srl item No. 26 here in before but of 25 mm bore. |
| 30 | All as per srl item No. 26 here in before but of 20 mm bore. |
| 31 | Supply and fix in replacement gun metal globe or gate valve ISI marked with iron wheel screwed down high pressure screwed both ends for iron pipe of size 50 mm bore. |
| 32 | All as per item No 31 here in before but 25 mm bore. |
| 33 | All as per item No 31 here in before but 20 mm bore. |
| 34 | S&F in replacement of Ball valves (Float valves) of size 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. |
| 35 | M & L for making Header of 300 mm dia of appropiate length for two raising main from existing pipe line and one direct water supply pipeline connected to header at OHT in MH with two no of outlets of 150mm dia each provided with sluice valves each of size 150mm at inlet at as well as oulet pipelines ,raising main from existing pipeline with all complete accessories including welding/cutting of pipes and flanges etc to its connected items, sluice valves, PCC foundation of suitable size for giving support to header complete.Note:- Fittings such as tee, sluice valves, bends etc, PCC work required for making the header and will be paid seperately. Item has to be executed at site if not then penalty of Rs 2500 will be imposed on contractor. |
| 36 | Material and labour for vibratory compacted, precast cement concrete rubber moulded, colored, interlocking designer paver blocks in Milano shape, confirming to IS-15658-2006 of 60mm thickness,M-35 grade, as in path, hard standing, etc. laid over and including 25mm compacted sand cushioning ,including 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate including surface excavation over area n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil and removing excavated soil exc 50mtr but n. exc 250mtr, complete all as specified and directed.Note:- Any surface/road/footpath damaged during the execution of the work will have to be make good if not then penalty of Rs. 250/- per Sqm will be imposed on the contractor. |
| 37 | Supply and fix air cooled split unit air conditioner hot & cold electric driven, single phase of capacity of 1.5 TR. Make: LG/ Voltas/Bluestar. |
| 38 | Supply and fix automatic voltage stablizer, single phase wall mounted cooper wound air cooled digital display and designed for input variation between 140 V to280 V with output votage stabilized at 230 V with accuracy of + 2.5% and of capacity 5.0 KVA. Make: Vguard/Volina/Microtech. |
| 39 | M & L for single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps ISI mark. |
| 40 | Wiring for circuit/Submain wiring alongwith earth wore wirh the 2 x 4 sqmm + 1.5 sq mm earth wire size of FR is PVC insulated copper conductor, single core cables in surface/recessed in PVC conduit. |
| 41 | M & L for wall stand suitable outer unit 1.0/1.5/2.0 TR. |
| 42 | Supply and fixing of Lithium based Energy Efficient Intergrated Solar Street Light of 32 Watt in Single FRP body with duly Polyurethane coating (Camouflage color), encases with MonocrystallineSolar PV Panel of 64/66 Wp, Lithium Battery 11.1/12.8 V, 33.0 AH with inbuilt BMS, IP 65, High brightness W-LED (160-180 lm/Watt) lamp with Aluminium reflector for better light distribution, CRI> 70, Color Temperature 5700K - 6500K, Microcontroller based charge controller cum driver, automatic dimming function (first four hours at full brightness & rest of the time at lower light level with PIR Motion Sensor), Dusk to Dawn Operation, suitable to working temperature:(-) 10°C to (+) 55°C, weight not more than 16-18 KG with adjustable MS clamp suitable for pole/wall mounting etc complete as required. Protections: short Circuit, overload, Reverse polarity and battery protections. Firm should provide vital Parameters Test report from NABL accredited lab and should be of made in India with CE & ROHS compliant complete all as specified and directed. Make: Axxon (Axn-32W) or equivalent of Phillips/Bajaj/Wipro/Havells. |
| 43 | Supply, erection and fixing of Octagonal Pole for Solar Light in true vertical position hot dip galvanized inside and outside octagonal pole of 7 mtr height with bottom outer dia not less than 130 mm and top outer dia not less than 70 mm and steel thickness 3mm. Complete with base plate 200 x 200 x 12mm, mounting accessories with 04 numbers of M20 x 600 mm long \"J\" type EN 8 grade foundation bolt along with template and suitable arrangement to mount solar light as directed on pole including foundation and erection as per manufacturer drawing, providing synthetic enamel paint over one coat of red oxide complete all as specifed and directed by Engr-in-Charge.Note:- Excavation and PCC works will be measured and paid seperately. |
| 44 | Material and labour cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as coping of pole and strut, stay arround the pole etc complete all as specified and directed. |
| 45 | Supply, laying and testing in trenches GI pipe medium grade of 40mm bore / diameter, ISI marked with all fittings complete all as specified and directed by Engr-in-Charge. |
| 46 | Supply, laying and testing in trenches GI pipe medium grade of 25 mm bore / diameter, ISI marked with all fittings complete all as specified and directed by Engr-in-Charge. |
| 47 | Supply, laying and testing in trenches GI pipe medium grade of 20 mm bore / diameter, ISI marked with all fittings complete all as specified and directed by Engr-in-Charge. |
| 48 | Supply & fixing in repair gun metal gate valves with iron wheel head screwed both ends for GI pipe of 40 mm bore dia of pipe. |
| 49 | Supply & fixing in repair gun metal gate valves with iron wheel head screwed both ends for GI pipe of 25 mm bore dia of pipe. |
| 50 | Supply & fixing in repair gun metal gate valves with iron wheel head screwed both ends for GI pipe of 20 mm bore dia of pipe. |
| 51 | Cutting GI pipes in position for insertion of new tees, branches, of pipe size 40mm dia and inserting tee complete all as specified. |
| 52 | M & L for PCC 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregrate as in bed of channel foundation filling and mass concrete. |
| 53 | S & F in PVC float valve 20 mm dia high pressure with polythene float and fly nuts complete screwed for GI pipe and fixed complete all as specified and directed. |
| 54 | Note:-Amount of credit ofRs 107369.00 for retrieved materials is mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender. |
