Tender For Strengthening Of Road In Front Of Casualty And Old Dental College, Repairing Of Pot Holes And Bumpy Road And Providing Premix Carpet From Radiotherapy Corner Up To The Rear Of Jubilee Hall And Providing Seal Coat For The Road Leading To A-, Imphal West-Manipur
TDR : 35736396
Tender Notice
BOQ
Expired
Imphal West
Manipur
Tender For Strengthening Of Road In Front Of Casualty And Old Dental College, Repairing Of Pot Holes And Bumpy Road And Providing Premix Carpet From Radiotherapy Corner Up To The Rear Of Jubilee Hall And Providing Seal Coat For The Road Leading To A-
Excavation in Hard Rock (blasting prohibited) (Excavation forroadworkinhardrock(blastingprohibited)with hydraulic excavator including cutting and loading in tipper, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within all lifts and lead upto 1000 meters, .)
2
AMechanised
3
BituminousMacadam(Providingandlayingbituminous macadamwith100-120TPHhotmixplantproducingan average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignmentandrolledasperclauses501.6and501.7to achieve the desired compaction)
4
(i) for Grading I ( 40 mm nominal size )
5
a) VG-40
6
(ii) for GradingII(19 mm nominal size)
7
a) VG-40
8
Tack Coat
9
(i) Tack coat on Bituminous surfacesProviding and applying evenly a priming/ tack coat with bitumen (80-100) 10kg/sqm
10
Surface Dressing (Providing and laying surface dressing as wearing course in single coat using crushed stone aggregatesofspecifiedsizeonalayerofbituminous binder laid on prepared surface and rolling with 8-10 tonnesmooth wheeled steel roller)
11
19 mm nominal chipping size
12
Open-GradedPremixSurfacing(Providing,layingand rollingofopen-gradedpremixsurfacingof20mm thicknesscomposedof13.2mmto5.6mmaggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base,includingmixinginasuitableplant,layingand rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades.)
13
Case-I: MechanicalmethodusingPenetrationgrade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour
14
Seal Coat (Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.