Tender For Installation Of Submersible Pump At Begunia Aymapara Icds
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Jan 2023
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
begunia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Submersible Pump At Begunia Aymapara Icds
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in foundation trenches in all sorts of soil cutting of soil including removing upto a lead 1.5 Mtr. |
| 2 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm --------------- complete including the cost of supply of sand. |
| 3 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 4 | Plain cement concrete with 6:3:1 sand cement mortar excluding shuttering and reinforcement as per relevant IS Code. |
| 5 | Ordinary cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS :456 M-15 Grade (1:2:4) |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, ...... complete as per drawing and direction. ( SRMB/ELEGANT STEEL CAPTAIN, BALAJI SHAKTI, HEXA, RUNGTA STEEL, ADHUNIK, SUPER SHAKTI, SALUJA GOLD, RASHMI TMT, SEL, SEL TIGER)1.2% of concrete volume |
| 7 | 250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar , In Ground Floor.(a) In ground floor |
| 8 | 125 mm. thick Flyash brick work as per IS 12894:2002 in cement mortar (1:4) in ground floor. |
| 9 | Hire and labour charges for shuttering with centering and necessary ---- ground floor |
| 10 | (a) 25 mm to 30 mm shuttering without staging in foundation |
| 11 | Plaster to wall ,floor ,ceiling etc. with sand and cement mortar including rounding off or --------------- ,scaffolding/ staging where necessary (Ground floor) |
| 12 | Plaster 15 mm thick for inside(6:1) |
| 13 | Artificial stone in floor, dado, staircase etc with cementconcrete (1:2:4) with stone chips, laid in panels as directed |
| 14 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them andlowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in theconnection. The tube well should have a minimum 50 mm gap in betweenthe outside of the tubewell pipe and the bore. |
| 15 | For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia.100 mm dia. boring etc. top enlargement |
| 16 | For depth upto 150 metre.(ii) 50 mm dia. boring etc. |
| 17 | Supply of PVC pipes & fittings Schedule 40 conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). Category A(A) PVC Pipes |
| 18 | PVC pipe 100mm dia (Ori plast/ Supreme make) |
| 19 | PVC pipe 50mm dia ((Ori plast/ Supreme make) |
| 20 | Supply of PVC pipes & fittings Schedule 80 conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(A) PVC Pipes |
| 21 | 32mm dia column pipe PVC make (Ori plast make) |
| 22 | 25 mm dia PVC pipe ((a) For Exposed Work |
| 23 | 15 mm dia PVC pipe(a) For Exposed Work |
| 24 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. 50mm dia(Ori plast make) |
| 25 | Supplying, fitting and fixing of following materials ------------- |
| 26 | (i) 50 mm dia.steel cutter piece upto 450 mm long wit |
| 27 | (ii) Reducing Socket (mm X mm)(50 x 100 ) |
| 28 | (iii) Supplying, fitting and fixing G.I. cap at top.(i) 100 mm |
| 29 | (iv) 100 mm dia supporting clamp |
| 30 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous -------including hire and labour charges for all tools and plants and scaffolding as required. |
| 31 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-inchargeincluding cost of all materials labour and equipment complete. |
| 32 | Supplying and fitting 1 hp submersible pump KSB make including starter and pannel box all complte as per specification |
| 33 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) ................ from Ground Level. ------I.S.Code. (i) For 10 users (A) With Pakur variety. (SAIL/TATA/RINL) |
| 34 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom .........all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and1.00m inside dia.Other than SAIL/TATA/RINL) |
| 35 | Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 mm |
| 36 | Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing).(i) 450 mm long |
| 37 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(b) 1000 litre capacity |
| 38 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(i) 450 mm X 300 mm size |
| 39 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 40 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length(b) 110 mm |
| 41 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 42 | Painting block letters or digits in Black Japan or anyapproved paint as per direction.c) Size above 4 cm. and upto 5 cm. |
| 43 | Cost for Photo at 3-stage ( Before starting, During ongoing stage, After completion) |
| 44 | Unforseen item (Payment to be made as per PWD Schedule of rate ------ |
AI Tender Summary
Tender Timeline
Jan 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 19, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 24, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender