|
| 1 | Supplying and fixingway double door 4 way make LEGRAND Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment including S&F 100A FP Isolator as incomer-and S&F 2 Nos 63A SP MCB as out going Make:Legrand |
| 2 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damagesto original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.Incl 1 no 40 A DP Isolator as incommer and 12 no SP MCB as out going 2+12 Way Legrand make |
| 3 | Supply and Fixing 9W T8 LED tube Crompton make with batten fitting incl all accessories directly on wall /celling with screw. |
| 4 | Supply and Fixing 56\"\" Orient Celling Fan Make:Summercool/New breeze |
| 5 | Supply and fixing 20 W LEDtube light with polycarbonate driver in built with metal heat sink durabale sidded connection fittings(T 8 Crompton make) LT8-20-865-2 Incl supply and fixing Batten(DMLNU-T8) and Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length |
| 6 | Supply and Fixing supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire. |
| 7 | Supply and Fixing extra downrod with Ivory painting |
| 8 | Drilling hole on fan motor and downrod incl. S&F split pin |
| 9 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc |
| 10 | Distribution wiring in 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required (Pwd/E-14,i & ii ) |
| 11 | 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 12 | 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 13 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copperwire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switchboard cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS boxand mending good the damages to original finish Average run 8 mtr |
| 14 | Supply & Fixing 240 V,6&20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 15 | Supplying & Fixing GI Modular Switch Board of 4 module complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works S&F Supply & Fixing 4 no 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessaryconnections as required |
| 16 | Supply & Laying of 4 core 16 SqmmXLPE/PVC insulated Aluminium armoured cable Mescab Make in underground trench 460 mm wide x 760 mm average deapth , with brick protection on the top of the cable with 8 (eight) nos bricks per meter , including filling the space between the brick & cabile and also the trench with sifteed soil, leveling up and restoring surface duly rammed, F-2, 1(a)+MR. |
| 17 | Supply and Laying of cable 2 core 10 sqmm Aluminiumarmoured Mescab make on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 18 | Supplying & Fixing compression type gland complete with brass gland , brass ring & rubber ring for dust and moisture - proof entry of XLPE/PVC armoured cables as below |
| 19 | 4 Core x16 sqmm,F-4/7© |
| 20 | 4 core 50 sqmm |
| 21 | 2 core 10 Sqmm |
| 22 | Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc.including supplying sockets, soldering materials, tapes etc. and making connection to switch BDB and BBC etc.F5 |
| 23 | 4 core x 16 sqmm. F-5/8(b) |
| 24 | 4 core 50 sqmm |
| 25 | 2 core 10 Sqmm |
| 26 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required :25 mm dia |
| 27 | 2. Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: |
| 28 | Supplying and fixing double-door SPN MCB Distribution Board 6 way Sneider Make with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damagesto original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.Incl Legrand make 40A DP Isolator incl 6 no 32 A Legrand make SP MCB |
| 29 | Supply and fixing 2ft LED Tube light 9 W Philips Astra/Surya |
| 30 | Distribution wiring in 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required (Pwd/E-14,i & ii ) |
| 31 | 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 32 | 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 33 | Supply & Fixing 240 V,6&20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 34 | Supply & Fixing 240 V, 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessaryconnections as required incl MS Cover |
| 35 | Supply & Laying of XLPE/PVC insulated armoured cable Gloster Make in underground trench 460 mm wide x 760 mm average deapth , with brick protection on the top of the cable with 8 (eight) nos bricks per meter , including filling the space between the brick & cabile and also the trench with sifteed soil, leveling up and restoring surface duly rammed, F-2, 1(a)+MR.2 core 10 Sqmm Cable |
| 36 | Supplying & Fixing compression type gland complete with brass gland , brass ring & rubber ring for dust and moisture - proof entry of XLPE/PVC armoured cables as below 2 Core x10 sqmm,F-4/7© |
| 37 | Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc.including supplying sockets, soldering materials, tapes etc. and making connection to switch BDB and BBC etc.F5 2 core x 10 sqmm. F-5/8(b) |
| 38 | 2. Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: |
| 39 | Supplying and fixing double-door SPN MCB Distribution Board 6 way Sneider Make with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damagesto original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.Incl Legrand make 40A DP Isolator incl 6 no 32 A Legrand make SP MCB |
| 40 | Supply and fixing 20 W LEDtube light with polycarbonate driver in built with metal heat sink durabale sidded connection fittings(T 8 Crompton make) LT8-20-865-2 Incl supply and fixing Batten(DMLNU-T8) and Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length |
| 41 | Distribution wiring in 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required (Pwd/E-14,i & ii ) |
| 42 | 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 43 | 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 44 | Supply & Fixing 240 V,6&20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 45 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bellpoint with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [PVC casing-capping on surface and Switch board concealed] Avg. Run 12 Mtr |
| 46 | Supply and Fixing 56\"\" Orient Celling Fan |
| 47 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc |
| 48 | Supply and Fixing supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire. |
| 49 | Supply and Fixing extra downrod with Ivory painting |
| 50 | Drilling hole on fan motor and downrod incl. S&F split pin |
| 51 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: |
| 52 | Supply & Erection of Hood type Feeder pillars box(1200 mm X900mm) of 14 SWG (2.00 mm) thick M.S Sheet size (500 x 300 x 150 mm) with base frame cousists of 75 mm x 40 mm x 4.4 mm MS chanel and the piller box structure with 50 x 50 x 5 mm. MS angle iron40 mm x 40 mm x 6 mm ,flat iron with necessary ventilation arrangement -2 sides inlc. Top of F.box and double door at both sides with locking arrangement incl. S&F 7-LVR Pad lock (best quality)with duplicate keys (2 sets) in both the doors & providing 2 (two) nos. earthing terminal in both side of F.box switch will be fixed on brick foundation incl. plastering and neat ceiment complete incl. 2 coats of synthetic enamel paints (Burger/Asian) over a coat of R.O primer.The Feeder piller box will be equiped with the following:-1) S&F Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. L&T make AS incommer 2)Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required 2 nos 415 V, 415 A Dimension of Cu. bars: 4 x 50x5mm 3) Supplying and fixing 2 nos 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse 315 A L&T make as outgoing with operating handle. |
| 53 | Supply of the following cubical type panels made of 14 guage CRCA structure, base channel, complete with, moulded case circuit breakers, meters, indicating lamps, current transformer 1200X950X300 etc. Complete in all respects, insulated bus bars with heat shrinkable PVC sleeve in suitable bus chambers,interconnection, small wiring, name plate, danger plat, earth bus etc. & comprising of compartments with hinged door for eachfeeder & its accesories, cable alley with hinged doors, bus chamber with bolted door etc. The panel being of dust & vermin proof construction with rubber gasket attractively powder coatingetc. The panel shall be free standing type/ wall mounted type as per relavant drawing and comprising with the following: 1 All MCCBS shall be with operating handle.2 CTs burden shall be 15VA & accuracy class 1.03 CTs shall be cast resin type .4 All MCCBs shall be with thermal magnetic/ Microprocessor based releases.5 All indication lights shall be LED type.6 All meter shall be digital/Analoge type.7 Rated Short Time withstand current of all ACB\"s are Icw for one second.8 Breaking Capacity of all MCCB\"s are Ics service breaking capacity |
| 54 | Incommer:Supplying and fixing 415 V FourPole 250A Lrgrand make MCCBof Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection |
| 55 | OUT GOINGSupplying and fixing 415 V FourPoleMCCBof Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection 63 A Legrand make |
| 56 | Supplying and fixing 415 V FourPoleMCCBof Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection 160 A Legrand make |
| 57 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 40A Legrand TPN |
| 58 | Supply FixingVoltmeter-Ammeter meter with screws & other fixing materials incl. making necessary holes and connections |
| 59 | Supply and Fixing one set Indication Lamp LED Type for each phase |
| 60 | Supply and Fixing of CT |
| 61 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers 415 V 600A on angle iron frame on wall, incl. earthing attachment and painting as required –( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 barX80X13 |
| 62 | Supply & Fixing of perforated GI cable tray cross member with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support |
| 63 | Supply and installation and commissioning of 125KVA, 415 V Ashok Leyland make fully build DG silent genarator of below mentioned specification:Genset Rating kVA 125 kVAFuel Consumption 21.6 Ltr/hrVoltage 12 VRated Current 173.91 AElectric Power 100 kWeProduct DetailsBrand Ashok LeylandModel LP125DBattery Capacity 90 AHWeight (Approx) 1876 kgSize (L x W) 3300 X 1250 X 1565 mmEngine:Bore X Stroke 104 X 113 mmEngine Model AL6DTIDG2No. of Cylinders & Configuration 6 & InlineDisplacement 5.77 LGoverner Used ElectronicGoverning Class A0Lube Oil Specification Gulf Leypower XLL Diesel Engine OilLube Oil Capacity (Approx) 17.5 LEngine Rated 116 kW/155.5 hpEarthing Installation: 4 nos Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below with TATA medium pipe |
| 64 | Supply and Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportionand dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts.above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properlyLength 7 mtr 410SP i.e 73 kg |
| 65 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating L&T make 315 A |
| 66 | Supply and Fixing HAVELLS make fuly Automatic Transfer switch 200A Code:IHYTCD0200 |
| 67 | providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick),atthebasepole(inlieuofCCmuffing)incl. drilled hole in pole suitable for alkathene/polythenepipe entry, for street light wiring, without Loop Box |
| 68 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive |
| 69 | Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providingwiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting |
| 70 | Painting of Steel Tubular Pole upto 9 Mtrs. along with arm bracket of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emerypaper, cleaning etc. for receiving fresh coat of paint.PWD-H-2/4(A) |
| 71 | Supplying and Drawing 1.1 KVsinglecorestranded\"FR\"PVC insulated & unsheathed single core 3 x 22/0.3 (1.5 sqmm)stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire andmaking necy. connection as required.PWD-E-9/1 b |
| 72 | Supply & Laying of 4 core 16 SqmmXLPE/PVC insulated armoured cable Mescab Make in underground trench 460 mm wide x 760 mm average deapth , with brick protection on the top of the cable with 8 (eight) nos bricks per meter , including filling the space between the brick & cabile and also the trench with sifteed soil, leveling up and restoring surface duly rammed, F-2, 1(a)+MR.(For Street Kight 350 Mtr and for Lab 200 Mtr |
| 73 | Supply & Laying of 2 core 10 SqmmXLPE/PVC insulated armoured cable Mescab Make in underground trench 460 mm wide x 760 mm average deapth , with brick protection on the top of the cable with 8 (eight) nos bricks per meter , including filling the space between the brick & cabile and also the trench with sifteed soil, leveling up and restoring surface duly rammed, F-2, 1(a)+MR. |
| 74 | Supply and Laying of one No. cable above 4 Core 50 sqmmXLPE/PVC insulated Aluminium armoured cable Mescab Make andin underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed |
| 75 | Earthing the S.T pole by installing 50 mm dia 3.00 mtrs. Long Cl-B (ISI Medium GI pipe) GI pipe as per Gs. To efficient earthing.PWD-G-1/2 (A) |
| 76 | Supply and fixing Crompton make LED street 60W light LSTP-60-CDL INCL Fixing outdoor type fluorescent/SV/MV light fitting on poleincluding supply anf fixing 25 mm dia arm bracket |
| 77 | Supply and Fixing 100 W LED Flood Light Crompton make CFS- 504-100-57-60D-SL-GL-NSG |
| 78 | Supply and fixing Havells make Astronomical Street Lighttimmer panel 3 phase 6KW, INCOMMER 40A TPN,SAP Code IHXTSO306A incl. 3 pole contactor bypass switch/MCB suitable box DIN channel ,all accessories and connection |
| 79 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required :25 mm dia |
| 80 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials |
| 81 | 4 Core 16 Sqmm Cable |
| 82 | 2 Core 10 Sqmm |
| 83 | 4 core 50 sqmm |
| 84 | Laying of one cable upto 150 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand |
| 85 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required incl booth end welding from Earth electrode to ST pole |
| 86 | Add GST@ 18% on Rs.4868919.64 i.e total amount over item 1.00 to 70.00. |
| 87 | Add labour welfare Cess @ 1% on Rs.5745325.18 i.e total amount over item 1.00 to 71.00 . |